Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
New Members >> Newbie Welcome Area >> Warm Welcome
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1157866767

Message started by Pride and Joy on 10. Sep 2006 at 06:39

Title: Warm Welcome
Post by Pride and Joy on 10. Sep 2006 at 06:39
Thank you every one for the warm welcome - I feel at home already. I have, already found some very valuable information in the forum, and I'm going to go ahead with the cruise upgrade if I can find a new stalk - also am going to try and get a new windscreen wiper stalk because the intermitant wheel is stuck.

Can I ask please (as I have as yet not touched anything under the bonnet) what size spark plug socket is required for my model.

Thanks again to eveyone - and keep up the brilliant job on this forum

[smiley=2vrolijk_08.gif]  Regards  Peter.

Title: Re: Warm Welcome
Post by Auto Addict on 10. Sep 2006 at 07:28

Pride and Joy wrote on 10. Sep 2006 at 06:39:
Thank you every one for the warm welcome - I feel at home already. I have, already found some very valuable information in the forum, and I'm going to go ahead with the cruise upgrade if I can find a new stalk - also am going to try and get a new windscreen wiper stalk because the intermitant wheel is stuck.

Can I ask please (as I have as yet not touched anything under the bonnet) what size spark plug socket is required for my model.

Thanks again to eveyone - and keep up the brilliant job on this forum

[smiley=2vrolijk_08.gif]  Regards  Peter.


See my maintenance guide-

http://www.omegaowners.com/forum/YaBB.pl?num=1157117391

Title: Re: Warm Welcome
Post by Markiec on 10. Sep 2006 at 10:49
Hello, good morning and welcome to our forum pride and joy  :)

Title: Re: Warm Welcome
Post by Pride and Joy on 10. Sep 2006 at 14:27
Thanks for the info Autoaddict - I've already read you maintenance guide, but the size of the drive is not important - are the plugs 14mm or 10mm plugs. I have both size sockets but niether is magnetic, they've just got a rubber bung in the neck to hold the plug in on removal. Is magnetic a safer bet, if so I will go and get one.

Cheers

Peter

Title: Re: Warm Welcome
Post by LSG 1 on 10. Sep 2006 at 19:52
Hi m8 and welcome to the forum  ;)

Title: Re: Warm Welcome
Post by Auto Addict on 10. Sep 2006 at 20:08

Pride and Joy wrote on 10. Sep 2006 at 14:27:
Thanks for the info Autoaddict - I've already read you maintenance guide, but the size of the drive is not important - are the plugs 14mm or 10mm plugs. I have both size sockets but niether is magnetic, they've just got a rubber bung in the neck to hold the plug in on removal. Is magnetic a safer bet, if so I will go and get one.

Cheers

Peter


I don't understand about the size of plug, I would only used the recommended Bosch, or genuine GM plugs.

GM, as I understand it, use Bosch branded under their own name.

Title: Re: Warm Welcome
Post by Pride and Joy on 10. Sep 2006 at 20:18
Auto Addict,

Thanks for the info - plug size I will sort out - but in your experience is it advisable to get a magnetic plug socket. to be honest never heard of them - only used the ones with the rubber collar to hold the plug. If you recommend then I will get one - don't want to loose any plugs in the bottom of the deep hole

Regards

peter

Title: Re: Warm Welcome
Post by Auto Addict on 10. Sep 2006 at 20:34
Rubber collar should be fine.

Title: Re: Warm Welcome
Post by Pride and Joy on 10. Sep 2006 at 20:39
Thank you

Peter

Title: Re: Warm Welcome
Post by Martin Imber on 13. Sep 2006 at 14:38
Hello and welcome

Title: Re: Warm Welcome
Post by Kev on 13. Sep 2006 at 16:56
Welcome to the Forum Dude.  [smiley=thumbsup.gif]

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.