Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl New Members >> Newbie Welcome Area >> newbie here... https://oldsite.omegaowners.com/forum/YaBB.pl?num=1161621339 Message started by roaduser on 23. Oct 2006 at 17:35

Title: newbie here...
Post by roaduser on 23. Oct 2006 at 17:35

Hi Chris here from Lincolnshire,

Well, what a crap weekend. Took my wife to East Midlands airport and the way back i was in a wrong lane at an island, my fault tried to change lane and bang, a nice alfa gtv pranged me, so thats what has led me here. Used to be a member of the UK probe owners club, had some good meetings / car shows and definately invaluable help in finding parts etc. So thats where im going now, off to the wanted section!! :)

Title: Re: newbie here...
Post by LSG 1 on 23. Oct 2006 at 17:44

Hi m8 and welcme to the forum :y

Title: Re: newbie here...
Post by nixoro on 23. Oct 2006 at 17:53

Welcome to the forum Roaduser :y

Title: Re: newbie here...
Post by Markiec on 23. Oct 2006 at 17:58

Welcome Roaduser - sorry your not here on happier grounds - but askaway and im sure you will get some excellent help.

How bad is the damage? :(

Title: Re: newbie here...
Post by roaduser on 23. Oct 2006 at 18:05

Hi Mark, not bad, rear door is bent in about an inch though, cleaned the prang up and looks ok but car was near mint condition and ive only had it 5 months so i want it back in mint condition ASAP. Going to drive it and keep my eyes open for one being broken.

Title: Re: newbie here...
Post by Markiec on 23. Oct 2006 at 18:16

perhaps post some piccies so we can see - maybe it will push out from under the doorskin? Is the paint broken?

Title: Re: newbie here...
Post by fatboynotslimmer on 23. Oct 2006 at 20:20

Hi & welcome :)

Title: Re: newbie here...
Post by RossPhim on 23. Oct 2006 at 20:37

Welcome to the forum Chris. :y

Title: Re: newbie here...
Post by Elite Pete on 23. Oct 2006 at 20:42

Hi Chris and welcome to the forum :y

Title: Re: newbie here...
Post by Bo Bo on 23. Oct 2006 at 20:54

Hello & welcome :)

Title: Re: newbie here...
Post by cav9_4 on 23. Oct 2006 at 21:23

Hi and welcome to the forum :y

Title: Re: newbie here...
Post by hotel21 on 23. Oct 2006 at 23:36

Howdoo, Chris. welcome to the site. loads of good info and an active wanted/sale section which could help you out. :y

B

Title: Re: newbie here...
Post by roaduser on 24. Oct 2006 at 17:39

some pics, looks easy repair in the pics but im not so sure :question

http://myweb.tiscali.co.uk/sunset/Image003.jpg
http://myweb.tiscali.co.uk/sunset/Image004.jpg
http://myweb.tiscali.co.uk/sunset/Image005.jpg

Title: Re: newbie here...
Post by bob.dent on 24. Oct 2006 at 17:47

Hi Chris and a belated welcome :y Hope you get the motor sorted

Title: Re: newbie here...
Post by nixoro on 24. Oct 2006 at 17:48

My first thoughts were its just the door strips then I noticed the dimple dent on the drivers door if it was just the door strips they could easily have been removed/resprayed, not sure really what the best thing would be to do.

Have you tried a suction cup dent puller on the dents it might work.

Not that this helps but good luck with getting it fixed.

Title: Re: newbie here...
Post by roaduser on 24. Oct 2006 at 17:55

its one of them where you scratch your head for 10 minutes looking at it and never come to any conclution, im waiting to see a body man who is friends with my old man, thats all he does just body work, then ill take it from there, in the meantime if some doors come available, then ill snap em up. :y it does look worse in the flesh though

Title: Re: newbie here...
Post by Markiec on 24. Oct 2006 at 18:02

It looks worse because you notice it road user :( im sure thats more than fixable, no need to go to the expense, if you can find them, of new doors. You may find theres a huge paint mismatch even on same paint code..... :-/

best of luck and hope the body main can asssist :y

Title: Re: newbie here...
Post by TheBoy on 26. Oct 2006 at 21:13

Welcome to the site, and apologies for the late welcome :)

Title: Re: newbie here...
Post by Jim on 27. Oct 2006 at 10:28

Hello Mate, And Welcome to the forum :y

Title: Re: newbie here...
Post by Gwilym on 01. Nov 2006 at 23:59

Hello and Welcome :)

Title: Re: newbie here...
Post by mickdundee on 02. Nov 2006 at 06:18

Welcome to the Forum :)