bloomin thing  
now only code i got is :
13 Oxygen sensor No change in voltage/open circuit.  

any advice please on  what this means/where to look
cheers in advance  
mick

Is the light still coming on?

I took a the meega out earlier & the light did come on, not instantly tho.
Mick is in bed now as up at 4am for work, but i will leave him a note on the bench.

Was the sensor replaced, of did he clean up the connections?

Aye he did replace the sensor & presume also cleaned the connections.

Which one did he replace because 13 is the drivers side one.....

Tina wrote on 09. Jan 2007 at 22:07:

Aye he did replace the sensor & presume also cleaned the connections.

I guess he is going to spend the weekend checking the wiring between sensor and ecu then....

Marks DTM Calib wrote on 09. Jan 2007 at 22:08:

Which one did he replace because 13 is the drivers side one.....

Im not sure, i will get him to answer this.

TheBoy wrote on 09. Jan 2007 at 22:09:

Tina wrote on 09. Jan 2007 at 22:07: Aye he did replace the sensor & presume also cleaned the connections. I guess he is going to spend the weekend checking the wiring between sensor and ecu then....

probably, and i want me 6x9s done  :(
but also want the meega put right, as i like the car lots

I'll look through TIS when I get chance (been a bit hectic here tonight with the Rover breaking down) - tends to give a step by step guide of simple things to measure, then suggests what needs changing (if anything).  Its not perfect, and is meant as a guide, not gospel...

TheBoy wrote on 09. Jan 2007 at 22:46:

I'll look through TIS when I get chance (been a bit hectic here tonight with the Rover breaking down) - tends to give a step by step guide of simple things to measure, then suggests what needs changing (if anything).  Its not perfect, and is meant as a guide, not gospel...

thanks,  i think he needs the meega sorted, and the quicker its sorted,
its chip done.
Then its play time
(fao:mick,  i wont redline it honest  ::)  )

TheBoy wrote on 09. Jan 2007 at 22:02:

Was the sensor replaced, of did he clean up the connections?

i replaced the passenger one


Marks DTM Calib wrote on 09. Jan 2007 at 22:08:

Which one did he replace because 13 is the drivers side one.....

bugger so your advice to look out for a drivers one came true sooner than i wanted lol

Tina wrote on 10. Jan 2007 at 04:40:

TheBoy wrote on 09. Jan 2007 at 22:02: Was the sensor replaced, of did he clean up the connections? i replaced the passenger one Marks DTM Calib wrote on 09. Jan 2007 at 22:08: Which one did he replace because 13 is the drivers side one..... bugger so your advice to look out for a drivers one came true sooner than i wanted lol

ok this is getting bloody confusing now firstly i posted this but selfish witch decided to log herself in for keeps >:( so i posted it as tina

next light on and off this morning but on the way home nothing, i tried my damnest to get light on but nothing.... even though it was daylight i had every electrical thing on encase it was that , only difference was it was dry so i may get some heatshrink and try re connecting drivers one as  its crimped on with bullet thingys and wrapped in black and nasty? unless there is another reason the atmospheric conditions could have caused this???