| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
New Members >> Newbie Welcome Area >> Hi from Essex https://oldsite.omegaowners.com/forum/YaBB.pl?num=1184757843 Message started by mini1400 on 18. Jul 2007 at 12:24 |
|
|
Title: Hi from Essex Post by mini1400 on 18. Jul 2007 at 12:24
Found this forum while searching for a solution to a misfiring Elite. Looks like cam cover gaskets... Will be doing them this weekend after looking at the guide on here
|
|
Title: Re: Hi from Essex Post by Bo Bo on 18. Jul 2007 at 13:02
Hello & welcome :)
|
|
Title: Re: Hi from Essex Post by DaveL on 18. Jul 2007 at 13:23
Pleased you found us, welcome to the forum. :y
8-) DaveL |
|
Title: Re: Hi from Essex Post by Auto Addict on 18. Jul 2007 at 13:31
Welcome to the forum :y
|
|
Title: Re: Hi from Essex Post by bob.dent on 18. Jul 2007 at 14:29
Greetings and welcome aboard :y
|
|
Title: Re: Hi from Essex Post by Loo-knee on 18. Jul 2007 at 17:14
Hi and welcome to the site, glad the forum has helped :y
|
|
Title: Re: Hi from Essex Post by razzo on 18. Jul 2007 at 18:19
Hi Mini1400 & welcome :y
|
|
Title: Re: Hi from Essex Post by Elite Pete on 18. Jul 2007 at 18:53
Hi and welcome to the forum :)
|
|
Title: Re: Hi from Essex Post by amigov6 on 18. Jul 2007 at 19:26 Elite Pete wrote on 18. Jul 2007 at 18:53:
:DWelcome aboard Mini 1400. A few of us used to play with Minis many years ago. The a series gets a little "fragile" at that level of overbore. 1340 was good but you could get alot from a good 1293cc. I'm guessing you're into Minis, if not ignore everything bar the welcome aboard bit!!! ;D |
|
Title: Re: Hi from Essex Post by TheBoy on 18. Jul 2007 at 19:36
Welcome to the site :)
Good luck with the gasket change. |
|
Title: Re: Hi from Essex Post by Cav9_4 on 18. Jul 2007 at 20:18
Hi & welcome to the forum :y
|
|
Title: Re: Hi from Essex Post by golfbuddy on 18. Jul 2007 at 20:21
Welcome :)
|
|
Title: Re: Hi from Essex Post by Markie on 22. Jul 2007 at 08:55
Hello and welcome to our forum :y
|
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |