Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> Tip Wiper Refit/Crank SEnsor
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1190569117

Message started by dbug on 23. Sep 2007 at 18:38

Title: Tip Wiper Refit/Crank SEnsor
Post by dbug on 23. Sep 2007 at 18:38
Hi
1998 Elite 2.5V6 Auto

Decided 2day to check plug type on crank sensor (ever since i have had car rarely starts first time but always 2nd so decided to change crank sensor) b4 ordering off fleebay.
Removed wipers - came off easy, and then scuttle to get to sensor plug.

TIP - B4 removing wipers operate first then stick a length of masking tape on windscreen level with tops of blade rubbers.  When refitting to splines align with masking tape first - easy way of getting back on in correct position.

Bonus? Unplugged sensor, refitted plug, scuttle and wipers.
Now appears to start ok 1st time!!!!!!
Will monitor.

Title: Re: Tip Wiper Refit/Crank SEnsor
Post by RonaldMcBurger on 23. Sep 2007 at 18:51
Mmmmmmmmmm, Did it start first time the first time, or second time? Does this mean that the first time it started second time, but the second time it started first time? :-X

Title: Re: Tip Wiper Refit/Crank SEnsor
Post by Dazzler on 23. Sep 2007 at 20:35
You must watch them tablets Fin ;D

Title: Re: Tip Wiper Refit/Crank SEnsor
Post by dbug on 23. Sep 2007 at 21:47

wrote on 23. Sep 2007 at 18:51:
Mmmmmmmmmm, Did it start first time the first time, or second time? Does this mean that the first time it started second time, but the second time it started first time? :-X

:question :question :question ;D ;D ;D ;D ;D ;D

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.