Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Wobbly rear view https://oldsite.omegaowners.com/forum/YaBB.pl?num=1191237915 Message started by V8S on 01. Oct 2007 at 12:25

Title: Wobbly rear view
Post by V8S on 01. Oct 2007 at 12:25

Another post, another problem.... ::) :)

The rear view mirror in the car I'm possibly buying has a rear view mirror that is loose at the ball and socket. Any ideas how to tighten this up or new part needed?

Edited to add: it's a facelift Elite.

Cheers!

Graham

Title: Re: Wobbly rear view
Post by Auto Addict on 01. Oct 2007 at 19:46

Anyone?

Title: Re: Wobbly rear view
Post by razzo on 01. Oct 2007 at 22:48

Don't know if it can be tightened but do a search on here for las_jacarandas as they break Omegas & may be able to help

Title: Re: Wobbly rear view
Post by V8S on 02. Oct 2007 at 10:27

Hi Razzo,

There is one (I think) on eBay. Las jacarandas seems only to deal with pre facelift models.

Title: Re: Wobbly rear view
Post by razzo on 02. Oct 2007 at 14:53

Think one is being broken on this thread www.omegaowners.com/forum/YaBB.pl?num=1191060484

Title: Re: Wobbly rear view
Post by Abiton on 02. Oct 2007 at 14:58

I have the same prob in my '96 car. I was wondering about just trying to roughen the surface of the ball, thereby increasing the friction of ball in socket. I'll have a go this evening and let you know how it goes... :)

Title: Re: Wobbly rear view
Post by Abiton on 02. Oct 2007 at 16:52

Well, if these mirror attachments haven't changed, it's an easy fix. Went in there with the intention of trying to roughen up the surface of the ball part, to find that the problem is (of course, with hindsight) that the socket part had split down one side.

Thought about trying to glue it, decided it wouldn't hold; thought about trying to melt the edges of the crack together with a soldering iron tip. Decided I'd need to hold the crack shut with something while I did this, hit upon a small tyrap as the solution. Tried it back on the car with just the tyrap, and it's a winner! No more floppiness for me! ;) ;D