Post by Chopsdad on 28. Oct 2007 at 10:51
Tools required: Small flat bladed screwdriver & 2 Credit Cards - best to use old/free cards as they may get damaged. I used some readily available from Texaco ;)
Simply slide the cards down either side of the rotary switch to disable the locking pins...
Pull/prise the entire housing forward and remove...
Bulb is located via the back and is removed with a small flat screwdriver, this is the grey piece in the pic ...
Once unlocked the bulb will simply fall out ...
Bulb markings are : ALBA 12V 0.5W
To refit, simply replace the new bulb and slide the housing back into it's holder. :)
Simply slide the cards down either side of the rotary switch to disable the locking pins...
Pull/prise the entire housing forward and remove...
Bulb is located via the back and is removed with a small flat screwdriver, this is the grey piece in the pic ...
Once unlocked the bulb will simply fall out ...
Bulb markings are : ALBA 12V 0.5W
To refit, simply replace the new bulb and slide the housing back into it's holder. :)