Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl New Members >> Newbie Welcome Area >> Hello There https://oldsite.omegaowners.com/forum/YaBB.pl?num=1198853979 Message started by steveo on 28. Dec 2007 at 14:59

Title: Hello There
Post by steveo on 28. Dec 2007 at 14:59

Hello Everyone,

Hope you all had a good xmas.

Mine was okay except I've snapped the cambelt on my Omega V6, :( what I'd like to know is whether the valves hitting the pistons on these engines is a guaranteed certanty or whether it's just a possibility. If it's only a possible then I'll have it looked at.

Anyone know of any independents in the West Wales / Carmarthenshire area who can do the belt / tensioners or is it best to take it to a main agent ? My local garage who does all my other servicing declined to do the belt because of the need for the specialist locking tool kit.

Sorry about all the questions in a newbie post.

Kind regards,

Steveo.

Title: Re: Hello There
Post by Elite Pete on 28. Dec 2007 at 15:02

Hi Steveo and welcome to the forum :y

I would say if the belt has snapped then it will be replacement heads but if the belt has only jumped a couple of teeth then you could be lucky.

Title: Re: Hello There
Post by tab on 28. Dec 2007 at 16:14

welcome mate, bad luck on the cambelt.

do you know when it was last changed?

Title: Re: Hello There
Post by Loo-knee on 28. Dec 2007 at 20:18

Welcome to the forum :y

Title: Re: Hello There
Post by Jimbob on 28. Dec 2007 at 20:44

Hello & welcome :y

Title: Re: Hello There
Post by cem_devecioglu on 28. Dec 2007 at 20:55

Welcome :y

The damage is a matter of chance..Depending on your speed and RPM..

Title: Re: Hello There
Post by Minispud on 28. Dec 2007 at 21:25

Hello and Welcome

Sorry about the Cam belt, but on a lighter note HAPPY NEW YEAR

Very nice driving county :y :y :y again sorry about the cam belt

Title: Re: Hello There
Post by Dazzler on 28. Dec 2007 at 22:23

Welcome, hope you enjoy the forum. :)

Title: Re: Hello There
Post by thewelshman on 29. Dec 2007 at 00:50

Seasons greetings and welcome to the O O F :) :y

Title: Re: Hello There
Post by Auto Addict on 29. Dec 2007 at 08:00

Welcome to the forum :y

Title: Re: Hello There
Post by mikedundee on 29. Dec 2007 at 09:38

Welcome to the Forum :y

Title: Re: Hello There
Post by alexandjen on 29. Dec 2007 at 09:59

Welcome Steveo and enjoy :y

Title: Re: Hello There
Post by motmann on 29. Dec 2007 at 10:15

hiya steveo and welcome, pity about the belt. the damage is sometimes done not when the engine stops but when you try and restart......... :(

Title: Re: Hello There
Post by sir ffcgary1 on 29. Dec 2007 at 12:20

Welcome to the forum steveo, sorry to hear about the cam belt. Very few get away whithout damage to the heads and valves but you will need a compression test to know more, best of luck to you. :y

Title: Re: Hello There
Post by TheBoy on 29. Dec 2007 at 15:23

Welcome :)

3 teeth slip usually considered maximum before bent valves

Title: Re: Hello There
Post by Golfbuddy on 30. Dec 2007 at 16:15

Welcome to the forum. :)

Title: Re: Hello There
Post by Martin Imber on 30. Dec 2007 at 20:09

Hello & Welcome :y

Title: Re: Hello There
Post by zirk on 31. Dec 2007 at 04:10

Hi,

welcome to the site.

Best of luck with the Engine.

Zirk.

Title: Re: Hello There
Post by Crazydad on 31. Dec 2007 at 13:42

Hello and welcome to the best Omega Forum on the Net :y

Title: Re: Hello There
Post by steveo on 02. Jan 2008 at 21:43

Thanks for all the encouragement and the tips. I'm still trying to find a garage that's brave enough to take it on. Guess it may have to be the main agent. There's not many V6 vauxhalls round here as far as I can tell and none of the local garages seem to have the alignment kit and are reluctant to buy it if they only ever use it on my car.

As for your questions well I as far as I can gather from the previous owner the belts were changed within the last couple of years, but I have that sort of feeling the it was just the belts not the tensioners as well, and as I'd originally only bought the car as a stop gap I didn't think anymore of it.

Anyone got any ideas on how much I'd be looking at to spend on new heads if the valves are bent ? Or would a complete replacement engine from a breakers (if i can find one) be a better bet ?

Regards,

Steveo

Title: Re: Hello There
Post by sir ffcgary1 on 02. Jan 2008 at 23:19

You can do the job your self as it's not hard, just a bit fiddly in places but do able. if still unsure shout help real loud and there maybe a member who maybe able to assist you if not too far.

Title: Re: Hello There
Post by Mike f on 06. Jan 2008 at 01:25

Hi and welcome, from one newbie to another. Loads of useful info and help on here.

Title: Re: Hello There
Post by A380 Elite on 16. Jan 2008 at 10:13

:) Hiya and welcome.