| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega Electrical and Audio Help >> Retrofitting Xenon headlamps... https://oldsite.omegaowners.com/forum/YaBB.pl?num=1222027854 Message started by sev on 21. Sep 2008 at 21:10 |
|
|
Title: Retrofitting Xenon headlamps... Post by sev on 21. Sep 2008 at 21:10
I've been offerred a set of xenon headlamps from a late pre-facelift car. I understand that they come with all the leveling sensors and control unit.
Is it an easy job to retro fit these? Do the sensors on the wishbones, and the control unit derive power from the headlamps or is it necessary to create a new loom section? Also, what wires will need to be spliced to fit onto what? Thanks in advance. |
|
Title: Re: Retrofitting Xenon headlamps... Post by TheBoy on 21. Sep 2008 at 21:14
I would say the levelling would be a bit of a pain to retro fit...
You also need headlight washing system to be legal... |
|
Title: Re: Retrofitting Xenon headlamps... Post by markey mark on 22. Sep 2008 at 02:35
to put the complete loom in will be a mare mate !! only two wires different to fit xenon but a bit of a grey area with the law although have had no probs with two cars at mot time !! :y
|
|
Title: Re: Retrofitting Xenon headlamps... Post by TheBoy on 22. Sep 2008 at 08:19 markey mark wrote on 22. Sep 2008 at 02:35:
It is not part of MOT test - only the fact it works and is aimed correctly. Just because it passes MOT doesn't make it legal. See Marks DTM Calib post - http://www.omegaowners.com/forum/YaBB.pl?num=1199707220 - for requirements :y In reality, if you have them aimed responsibly (and not right at upper limit, or higher, and are prepared to adjust them when you have heavy loads), you are probably unlikely to be picked up. You may find that you are very frequently cleaning the lenses without a washer system, as HID lightly is strangely adversely affected by small amounts of grim that do not affect halogens so much... |
|
Title: Re: Retrofitting Xenon headlamps... Post by Marks DTM Calib on 22. Sep 2008 at 09:26 TheBoy wrote on 21. Sep 2008 at 21:14:
Not actually true, they need to have the correct approvals to be legal and thats about it....... |
|
Title: Re: Retrofitting Xenon headlamps... Post by TheBoy on 22. Sep 2008 at 11:03 Marks DTM Calib wrote on 22. Sep 2008 at 09:26:
Referring to your post http://www.omegaowners.com/forum/YaBB.pl?num=1199707220 specifically: 2. Once fitted to the vehicle it must have headlamp cleaning and self-levelling (which can be for the headlamp or can be in the vehicle suspension - some expensive estate cars have "self-levelling suspension" and that is adequate). Also the dipped beam must stay on with the main beam ::) |
|
Title: Re: Retrofitting Xenon headlamps... Post by Marks DTM Calib on 22. Sep 2008 at 11:39 TheBoy wrote on 22. Sep 2008 at 11:03:
And in reply, confirming the legal stance and not the 'fact sheet' |
|
Title: Re: Retrofitting Xenon headlamps... Post by sev on 22. Sep 2008 at 20:40
thanks guys. The washer system not really a problem, it's no big deal.
However it'll be interesting to see how the wiring routes for these. The other option is projector or osram nightbreakers! I suppose I just want sweet revenge on the f*****r in his bmx x5 that keeps burning the back of my eyeballs out on the way home every night! ;D |
|
Title: Re: Retrofitting Xenon headlamps... Post by markey mark on 22. Sep 2008 at 21:10 sev wrote on 22. Sep 2008 at 20:40:
get an elite self dimming rear view mirror there ace !! :y |
|
Title: Re: Retrofitting Xenon headlamps... Post by sev on 23. Sep 2008 at 14:13 markey mark wrote on 22. Sep 2008 at 21:10:
lol, thanks mark, but I want his eyeballs to get the HID sweet loving that he loves to dish out to others! |
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |