| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> Breaking facelift 3.0 ELite saloon Z147 https://oldsite.omegaowners.com/forum/YaBB.pl?num=1239267187 Message started by DaveMarshall on 09. Apr 2009 at 09:53 |
|
|
Title: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 09. Apr 2009 at 09:53
Just collected a 3.0 Elite saloon in Z147, front end damaged.
Will be getting stripped after the bank holiday weekend. X30XE engine 115k excellent runner £375 AR35 gearbox £90 17" alloys with good tyres all round £300 Leather interior, seats and door cards Black, excellent £175 Doors £25 each Bootlid with spoiler £60 Rear lamps outer £15 each BOSE speakers, amp, loom e.t.c £100 Prov sold Rear shelf and blind £60 Leather steering wheel excellent £25 Mirrors £75 each Rear bumper, few scuffs £30 ABS unit £55 Ballast packs for Xenon lights £20 each Foglamps £15 each Headlamp washer jets, silver £30 pair Wiper motor and linkage £20 CCR2006 tap and 4 disc changer with cage, uncoded so plug straight in £75 Climate panel working £20 Wood trim kit, radio heater surround, gear surround auto £25 Centre arm rest working, slight bit of wear to the plastic of the button £25 Multi position sunroof kit £20 Auto dim rear view mirror £25 All other parts available, i'll be away for the easter weekend but can access my e-mails so feel free to drop me a message at davemarshall00@yahoo.co.uk Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by glsboy on 12. Apr 2009 at 23:32
ayup pal...mite be interested in the wheels and tyres....wot nick r they in....
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Pete Elite on 13. Apr 2009 at 00:14
Hi Dave, If the rear bumper is ok and only needs a bit of paint then will most likely have it off you and have been told i will also need bumper iron and polysteyrne under bumper(fixings also)because I'm going to fit it on my Pre-facelift, so will this be extra :).
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by johnnycboy on 13. Apr 2009 at 09:35
Does the stereo have built in 4 disc changer with magazine, could possibly have it off you. any chance of a pic.
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by RichardH on 13. Apr 2009 at 11:49
And could you stick up some pics of the leather seats when you get a chance please?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 13. Apr 2009 at 21:37 glsboy wrote on 12. Apr 2009 at 23:32:
Pics will follow later in the week, few marks but otherwise good. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 13. Apr 2009 at 21:38 Pete Elite wrote on 13. Apr 2009 at 00:14:
Would you be collecting? If so then you are welcome to have those bits for free. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 13. Apr 2009 at 21:38 johnnycboy wrote on 13. Apr 2009 at 09:35:
Sorry just sold it. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 13. Apr 2009 at 21:39 RichardH wrote on 13. Apr 2009 at 11:49:
Pics will be up later in the week. Seats are excellent, no wear, need to check the door cards. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Pete Elite on 13. Apr 2009 at 21:43 DaveMarshall wrote on 13. Apr 2009 at 21:38:
Yes Dave i will be collecting if that's ok and thanks for the offer :y. Have you got a postcode for where I'd have to collect from and how quickly would i have to :question |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. Apr 2009 at 07:34
PM sent.
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Pete Elite on 14. Apr 2009 at 18:49
PM received and answered :y.
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by elnafinn on 14. Apr 2009 at 20:38
Hi
I am after an offside mirror for a 2003 Elite estate Would what you have on offer suit The rear case of my mirror is ok so to avoid any spraying I would want to fit that to the replacement unit Would that work Regards Ian |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by jjleonard on 14. Apr 2009 at 21:52
Are the rear discs 286mm vented and in a decent state? I'm getting desparate - can't source vented rears anywhere.
(I'm sure I shouldn't have said I'm desparate - you'll quote me ONE MILLION POUNDS for them now!) ;D ;D |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. Apr 2009 at 22:22
Vented are only on the 2.6 and 3.2. I have a later Elite coming in late next week believe it's a 3.2 but I usually sell the vented brake setups to the Vectra owners as they fit them as an upgrade.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. Apr 2009 at 22:23 elnafinn wrote on 14. Apr 2009 at 20:38:
I have both mirrors here complete and working £75 each, as far as I can tell you can swap the coloured part of the mirror over, i'll leave that to you to do though. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by jjleonard on 15. Apr 2009 at 08:30 DaveMarshall wrote on 14. Apr 2009 at 22:22:
Fair enough - thanks Dave. :y |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by RichardH on 15. Apr 2009 at 13:46 DaveMarshall wrote on 13. Apr 2009 at 21:39:
Thanks for the reply Dave. I would not need door cards because as far as I know they are the same as the standard ones? Do you know if the heater pads still work? Very interested, but I am located in Ireland so I need to see if I can find a courier company that would collect them and ship to me. Not easy and very expensive in my research so far! |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 15. Apr 2009 at 22:20
Yes they were working, not sure on the door cards, I always just sell them as a set anyway. What area are you in i'll get a price through my courier.
Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 17. Apr 2009 at 16:48
BOSE speaker set is now available.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Pete Elite on 19. Apr 2009 at 00:44
Nice to meet you Dave and thanks for the great deal on the Bumper :).
Cheers, Pete :y. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 19. Apr 2009 at 11:52
Nice to meet you too Pete.
Cheers, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveDempsey on 19. Apr 2009 at 14:50
Do you have the part number for the ECU control unit?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 19. Apr 2009 at 19:19
Engine ECU?
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveDempsey on 20. Apr 2009 at 14:36 DaveMarshall wrote on 19. Apr 2009 at 19:19:
sorry I was being dim, meant to put ABS control unit. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by philby on 20. Apr 2009 at 21:07
hi have you got headlamp trim and at what price with p&p 8-)
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 20. Apr 2009 at 21:35 DaveDempsey wrote on 20. Apr 2009 at 14:36:
I've sold it i'm afraid. Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 20. Apr 2009 at 21:36 philby wrote on 20. Apr 2009 at 21:07:
The little bits that go round the bottoms of the lights? They were damaged i'm afraid. Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by tmx on 20. Apr 2009 at 23:16
any centre sections?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by gee-man on 21. Apr 2009 at 21:39
have you any decent rear springs from an elite saloon, (with auto levelling suspension)
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 22. Apr 2009 at 15:55
I haven't i'm afraid, think they were the only item I forgot to remove from the car before I scrapped the shell.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by HNO3GOH on 25. Apr 2009 at 17:44
Hi Dave do you still have both rear doors?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 26. Apr 2009 at 12:32
Yes both doors are still here.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by HNO3GOH on 26. Apr 2009 at 20:37 DaveMarshall wrote on 26. Apr 2009 at 12:32:
PM sent :y |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by 3.2manual on 30. Apr 2009 at 12:54
Hi interested in all the heater control surround wood, ashtray and cd head unit with cage for my ex police estate. If its manual also the gearstick wooden surround. Thanks Alan :y
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Gareth Lewis on 30. Apr 2009 at 20:42
Hi Dave
Interested in the Centre arm rest, slight bit of wear to the plastic of the button at £25 I'm assuming its just the rest and the mini tray below as this is all I need? Thanks |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 30. Apr 2009 at 23:25 Gareth Lewis wrote on 30. Apr 2009 at 20:42:
It's the whole arm rest with strorage tray. Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 30. Apr 2009 at 23:26 3.2manual wrote on 30. Apr 2009 at 12:54:
It's an Auto, still have all the wood trim here. Thanks, Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Gareth Lewis on 01. May 2009 at 08:51 DaveMarshall wrote on 30. Apr 2009 at 23:25:
Brilliant - Can you let me know how I go about getting it. Thanks Gareth |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 03. May 2009 at 11:28
PM sent
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by omegadti on 11. May 2009 at 18:51
Hi - I need the plastic trim that fastens on the sunroof on a facelift - do you have one?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by joshwyatt on 11. May 2009 at 19:32
Hi there,
Do you still have the backbox with twin tailpipe design? And is it the orginal one to the car? Asking as bought new exhaust from Vaux and not happy with the look of the backbox so am looking for an original twin tailpipe one from a facelift in good condition. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by vfrdavid0 on 13. May 2009 at 14:20
Hi There
Do you still have the leather seats for sale on this car or have they already been sold? If they have been sold i am interested in a set of leather seats if you have any more or know if some are coming in. Regards David |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by HI2DVY on 14. May 2009 at 01:00
Hi Dave,
Are the 17" Alloys still available? If so are they in good nick? Dave |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. May 2009 at 21:34 HI2DVY wrote on 14. May 2009 at 01:00:
I have two sets here both in good condition. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. May 2009 at 21:35 vfrdavid0 wrote on 13. May 2009 at 14:20:
Leather sold i'm afraid, no more coming in at the moment. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. May 2009 at 21:36 joshwyatt wrote on 11. May 2009 at 19:32:
It's not in the best of condition, still perfectly useable, it is a twin tailpipe one though. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 14. May 2009 at 21:37 omegadti wrote on 11. May 2009 at 18:51:
I haven't i'm afraid. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 25. May 2009 at 10:16
I still have a lot of parts left from this, some of the items that have gone are.
Engine bare, all anciallries available. Leather interior Head unit, still have full Bose setup Gearbox although I have another AR35 from the 3.2 i'm breaking Sold a few odds and ends but still have a lot of items and lots of other Omega items from previous breakers. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by 924boy on 25. May 2009 at 12:03
hi, am after roof lining for facelift estate without sunroof or police cut outs???
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 25. May 2009 at 20:37
Left the last one in the car.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by ballcock50 on 11. Jun 2009 at 21:20
Hi have you still got the auto box for sale? and is it ready for pick up? Thanks Tom.
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by summat on 27. Jun 2009 at 16:04
I take it that the "Centre arm rest working, slight bit of wear to the plastic of the button £25" has gone?, you seem to get through a few miggies - if you have this, or another like it please PM me as mine has mysteriously been broken :(
Edit: For a 2001 facelift 2.6 Elite, if it matters. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Pitchfork on 27. Jun 2009 at 16:24
Roof ariel including the rubber washer between ariel & roof? Mine has perished
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 28. Jun 2009 at 12:12 summat wrote on 27. Jun 2009 at 16:04:
I'll take a look on monday but i'm pretty sure i've sold all the centre arm rests I had. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 28. Jun 2009 at 12:12 Pitchfork wrote on 27. Jun 2009 at 16:24:
Sorry but it didn't have one fitted. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by ngrainqey on 28. Jun 2009 at 13:47
hiya dave, whats the front end damage include? just the bumper and the behind bumper beam thingy?
thanks |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 28. Jun 2009 at 18:51 ngrainqey wrote on 28. Jun 2009 at 13:47:
What do you need mate? Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Agemo on 04. Jul 2009 at 22:26
After a switch for the blind, let me know if available please. Cheers.
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by rsnewman on 05. Jul 2009 at 09:24
Hi, is there any chance of a pic of the climate control panel? I just want to make sure it's the same as mine (except working!!)
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 05. Jul 2009 at 11:51 rsnewman wrote on 05. Jul 2009 at 09:24:
Here you go. http://cgi.ebay.co.uk/OMEGA-ELITE-HEATER-CLIMATE-CONTROL-SWITCH-PANEL-00-03_W0QQitemZ120440718170QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c0ad3835a&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A1%7C293%3A1%7C294%3A30 Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 05. Jul 2009 at 11:52 Agemo wrote on 04. Jul 2009 at 22:26:
I'll check in my box of switches to see if I have one left for you. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Darkus Lordus on 06. Jul 2009 at 18:27
Maybe interested in the rear blind. Are they the same as a pre-facelift?
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 07. Jul 2009 at 11:13
Rear blind sold sorry.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Lee A on 20. Jul 2009 at 22:49
PM sent
|
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by Mr Carbon on 21. Jul 2009 at 22:36
Hello Dave.
Is the exhaust system still available? I'm after both centre sections and a twin pipe back box. Preferably they'd all be GM parts in good condition. Also, would sending the bits by post be an option? Cheers. :) |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 22. Jul 2009 at 11:29
Sold i'm afraid.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by jollie on 01. Aug 2009 at 11:05
Hi Dave
Do you still have the Complete Bose system with CCr800 for sale? Cheers for you time Jason |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by macca on 01. Aug 2009 at 21:58
Hi dave, have you still got the handbrake cable by any chance?
Mark |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 02. Aug 2009 at 15:47 jollie wrote on 01. Aug 2009 at 11:05:
Sold it all, had a ccr600 fitted to it anyway. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 02. Aug 2009 at 15:48 macca wrote on 01. Aug 2009 at 21:58:
Not something i'd sell second hand, new ones can't be that expensive. Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 02. Aug 2009 at 15:52
Can someone close this thread now please as it's pretty old now.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by hackerabcd on 02. Aug 2009 at 21:58
how much for the four doors posted to ireland
cheers peter |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by DaveMarshall on 03. Aug 2009 at 20:33
Don't post doors.
Dave. |
|
Title: Re: Breaking facelift 3.0 ELite saloon Z147 Post by hotel21 on 05. Aug 2009 at 23:10 DaveMarshall wrote on 02. Aug 2009 at 15:52:
Locking at OP's request.... :y |
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |