Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Reffiting cambelt. https://oldsite.omegaowners.com/forum/YaBB.pl?num=1248721315 Message started by Brick Tamland on 27. Jul 2009 at 20:01

Title: Reffiting cambelt.
Post by Brick Tamland on 27. Jul 2009 at 20:01

Is it ok to refit the cambelt after 3.5k miles, while changing lifters? :-/

Assuming that it has to go on in the same direction and the setting on the tensioner has to be changed for used? :y

And yes, I know for a fact it has only done 3.5k because I done it :)

And no, I'm not a sheep ::)

Title: Re: Reffiting cambelt.
Post by TheBoy on 27. Jul 2009 at 20:04

should be fine :y

Title: Re: Reffiting cambelt.
Post by TheBoy on 27. Jul 2009 at 20:04

assuming all tensioners and riollers were also changed 3.5k ago

Title: Re: Reffiting cambelt.
Post by Brick Tamland on 27. Jul 2009 at 20:06

Yep, thanks :y :y

Title: Re: Reffiting cambelt.
Post by sev on 28. Jul 2009 at 00:50

just make sure that you set the tensioner to the used setting rather than the full tension as you did for the new belt.