Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> Breaking: Ex-plod 3.0 manual, 2000-W facelift
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1249570712

Message started by PeteG on 06. Aug 2009 at 15:58

Title: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 06. Aug 2009 at 15:58
Right. Head gasket is definitely gone on no.6 cylinder, so it'll take more work than the 2.6 to put right.

As such, I'm selling anything off it that I don't want.

I'm using the 3.0 cams, and the bodywork forward of the A-pillar. Anything else, give me a shout and I'll post pics up of whatever you want to look at :y

Best bits -

Electric mirrors, white, practically unmarked.

CDR2005, silver, supplied with code

Immaculate CDX alloys, with brand-new Falken FK452s - will let them go for the right price, bearing in mind the tyres are worth £280 on their own... they've done less than 100 miles

Xenon lights and associated wiring, washers, the whole caboodle.

99% immaculate GLS seats (ooooooooooooooh! ;) )

As said, give me a shout.  8-)

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by serek on 06. Aug 2009 at 19:23
what about diff? is one with LSD?
thanks


Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 06. Aug 2009 at 19:35

serek wrote on 06. Aug 2009 at 19:23:
what about diff? is one with LSD?
thanks


Don't think it's an LSD... but I might well be using it to replace my 2.6's (Possibly leaking, can't get in to check it yet). If I don't use it, I'll give you a shout first :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Lee A on 06. Aug 2009 at 21:24
I need a couple of silly things, if you have em - a cap that goes over the wiper nut where it attaches to the spindle, and also the clip that attaches the header tank to the inner wing.

PM me with how much you want for them? :)

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Charlies Dad on 06. Aug 2009 at 21:52
do you have the near side rear ashtray, is the interior black ?

how much ?

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by LSG 1 on 06. Aug 2009 at 22:17
:'( :'( :'( :'(

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 07. Aug 2009 at 01:57

Lee A wrote on 06. Aug 2009 at 21:24:
I need a couple of silly things, if you have em - a cap that goes over the wiper nut where it attaches to the spindle, and also the clip that attaches the header tank to the inner wing.

PM me with how much you want for them? :)


PM'd.


Charlies Dad wrote on 06. Aug 2009 at 21:52:
do you have the near side rear ashtray, is the interior black ?

how much ?


Trim round the doors is black, dash and centre console are walnut.

Ashtray, I think I have, I'll do you for £2 posted? PM me and I'll send you my Paypal details :y


Del Boy wrote on 06. Aug 2009 at 22:17:
:'( :'( :'( :'(


I know, mate, I'm gutted. Did the oil cooler, spent a couple of days doing it, and it was perfect... or so I thunk. Reckon it's when the coolant dropped and I wasn't in a position to stop.

Tried the K-seal, like you suggested, and it sealed it for about 10 minutes... then promptly spat it out the exhaust in disgust...  :D

Stripped the top of the engine to take the oil cooler out (and put in the 2.6)... could see the remains of the K-seal splattered up the inlet for no.6 cylinder.

Still, it's not out of its useful life yet. I got plans for a few bits of it...  :D  8-)

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by matty on 07. Aug 2009 at 10:35
does it have a spoiler?

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by LSG 1 on 07. Aug 2009 at 10:50

PeteG wrote on 07. Aug 2009 at 01:57:

Lee A wrote on 06. Aug 2009 at 21:24:
I need a couple of silly things, if you have em - a cap that goes over the wiper nut where it attaches to the spindle, and also the clip that attaches the header tank to the inner wing.

PM me with how much you want for them? :)


PM'd.


Charlies Dad wrote on 06. Aug 2009 at 21:52:
do you have the near side rear ashtray, is the interior black ?

how much ?


Trim round the doors is black, dash and centre console are walnut.

Ashtray, I think I have, I'll do you for £2 posted? PM me and I'll send you my Paypal details :y


Del Boy wrote on 06. Aug 2009 at 22:17:
:'( :'( :'( :'(


I know, mate, I'm gutted. Did the oil cooler, spent a couple of days doing it, and it was perfect... or so I thunk. Reckon it's when the coolant dropped and I wasn't in a position to stop.

Tried the K-seal, like you suggested, and it sealed it for about 10 minutes... then promptly spat it out the exhaust in disgust...  :D

Stripped the top of the engine to take the oil cooler out (and put in the 2.6)... could see the remains of the K-seal splattered up the inlet for no.6 cylinder.

Still, it's not out of its useful life yet. I got plans for a few bits of it...  :D  8-)

Good to hear  :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 07. Aug 2009 at 13:48

matty wrote on 07. Aug 2009 at 10:35:
does it have a spoiler?


Sadly not.

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by matty on 07. Aug 2009 at 14:34
worth a try, thanks

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Pedro on 07. Aug 2009 at 16:03
Saloon or estate?

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 07. Aug 2009 at 18:00

wrote on 07. Aug 2009 at 16:03:
Saloon or estate?


Saloon :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Jim on 07. Aug 2009 at 19:14
do you have all the parts to do a manual
From auto conversion.

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by mark mv6 on 07. Aug 2009 at 19:58

Jim wrote on 07. Aug 2009 at 19:14:
do you have all the parts to do a manual
From auto conversion.

You have bet me to it jim. ;D

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 08. Aug 2009 at 02:46

Jim wrote on 07. Aug 2009 at 19:14:
do you have all the parts to do a manual
From auto conversion.


Having had a look at the other topics on the subject, I think I have - what's the going rate for the parts... and what do I need to remove them - engine crane? Or just a jacking up of the car? :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by sands on 08. Aug 2009 at 09:06
how much for full car

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by filterdal on 08. Aug 2009 at 09:29
hi how much for drivers side lights thanks daron

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 08. Aug 2009 at 13:53

filterdal wrote on 08. Aug 2009 at 09:29:
hi how much for drivers side lights thanks daron


Which ones?


wrote on 08. Aug 2009 at 09:06:
how much for full car


Not selling whole car, sorry.



Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by jjleonard on 09. Aug 2009 at 22:52
do you know if the suspension is lowered? i.e. MV6 spec - i might be after the shocks and springs all round...

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by LSG 1 on 09. Aug 2009 at 22:57

jjleonard wrote on 09. Aug 2009 at 22:52:
do you know if the suspension is lowered? i.e. MV6 spec - i might be after the shocks and springs all round...

Has MV6 springs iirc  :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 09. Aug 2009 at 23:21

jjleonard wrote on 09. Aug 2009 at 22:52:
do you know if the suspension is lowered? i.e. MV6 spec - i might be after the shocks and springs all round...


I'm using the back dampers, fronts I won't be able to get off for a while... if you can wait a couple of weeks?

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by phate321 on 10. Aug 2009 at 08:41
Do you still have the cats?
Also need 2 plenum bolts  ;)

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by jjleonard on 10. Aug 2009 at 08:47

PeteG wrote on 09. Aug 2009 at 23:21:

jjleonard wrote on 09. Aug 2009 at 22:52:
do you know if the suspension is lowered? i.e. MV6 spec - i might be after the shocks and springs all round...


I'm using the back dampers, fronts I won't be able to get off for a while... if you can wait a couple of weeks?


Yeah, no rush. PM me when you have 'em with a price.

Cheers
John.

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 10. Aug 2009 at 12:15

v6miggy wrote on 10. Aug 2009 at 08:41:
Do you still have the cats?
Also need 2 plenum bolts  ;)


Cats are still attached to the car, I'll see about getting them off ASAP. Plenum bolts, no bother.



Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Jim on 10. Aug 2009 at 12:30

PeteG wrote on 08. Aug 2009 at 02:46:

Jim wrote on 07. Aug 2009 at 19:14:
do you have all the parts to do a manual
From auto conversion.


Having had a look at the other topics on the subject, I think I have - what's the going rate for the parts... and what do I need to remove them - engine crane? Or just a jacking up of the car? :y

Don't know to be honest. But let me know as I'm intrested

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by phate321 on 10. Aug 2009 at 13:59

PeteG wrote on 10. Aug 2009 at 12:15:
[quote author=4951584D5C0A0B08390 link=1249570712/22#22 date=1249890078]Do you still have the cats?
Also need 2 plenum bolts  ;)

Cats are still attached to the car, I'll see about getting them off ASAP. Plenum bolts, no bother.


Excellent! If you could give me a quote including postage for the nearside cat and 2 plenum bolts that would be perfect  :y Thanks





Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Charlies Dad on 12. Aug 2009 at 20:17
does anyone know if the ashtrays in the rear doors would fit into an estate ? think they will just not 100%

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by LSG 1 on 12. Aug 2009 at 22:13

Charlies Dad wrote on 12. Aug 2009 at 20:17:
does anyone know if the ashtrays in the rear doors would fit into an estate ? think they will just not 100%

Yes  :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Charlies Dad on 12. Aug 2009 at 22:57
cheers lsg thought so just wasnt sure

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by jjleonard on 13. Aug 2009 at 12:29
Has it got the wood interior trim? How much for centre console, stereo surround, ashtray and door strips (i'll take the door cards whole if it's easier).

Not too fussed about condition - i'm looking for a whole set I can sand and respray.

Cheers
John.

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by LSG 1 on 13. Aug 2009 at 12:48
Only has centre console, ashtray and manual gear surround.

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 13. Aug 2009 at 12:52

jjleonard wrote on 13. Aug 2009 at 12:29:
Has it got the wood interior trim? How much for centre console, stereo surround, ashtray and door strips (i'll take the door cards whole if it's easier).

Not too fussed about condition - i'm looking for a whole set I can sand and respray.

Cheers
John.



Del Boy wrote on 13. Aug 2009 at 12:48:
Only has centre console, ashtray and manual gear surround.


What 'e said - door cards are black plastic :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by jjleonard on 13. Aug 2009 at 22:01
DOH! never mind - thanks!

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Charlies Dad on 13. Aug 2009 at 22:26
do you also have the centre caps ?

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by phate321 on 14. Aug 2009 at 10:45
Any update on the cats m8? My pattern one sounds like a Flatulence in a can. Sick of people looking at me for the wrong reasons!  :(

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by phate321 on 14. Aug 2009 at 10:46

v6miggy wrote on 14. Aug 2009 at 10:45:
Any update on the cats m8? My pattern one sounds like a Flatulence in a can. Sick of people looking at me for the wrong reasons!  :(


Wow I have never had my f arts edited before  ;D

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 14. Aug 2009 at 15:29

Charlies Dad wrote on 13. Aug 2009 at 22:26:
do you also have the centre caps ?


I'm only willing to sell the wheels complete I'm afraid - they are 99.9% immaculate and with brand-new tyres, so if they don't sell I'm keeping them for mine :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Tefal on 14. Aug 2009 at 23:52
need the front passenger electric window switch  :)

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 15. Aug 2009 at 01:06

Tefal wrote on 14. Aug 2009 at 23:52:
need the front passenger electric window switch  :)


If I can get it out of the car without breaking it, its yours. :y

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by Elite Pete on 17. Aug 2009 at 08:20
Hi Pete,
Is the centre console lid intact and if it is can you give me a price :y

Pete

Title: Re: Breaking: Ex-plod 3.0 manual, 2000-W facelift
Post by PeteG on 17. Aug 2009 at 13:09

Elite Pete wrote on 17. Aug 2009 at 08:20:
Hi Pete,
Is the centre console lid intact and if it is can you give me a price :y

Pete


It won't always stay closed, the lid itself is in perfect nick - don't know if its any good to you?

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.