| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> towbar for sale https://oldsite.omegaowners.com/forum/YaBB.pl?num=1249806990 Message started by r1 on 09. Aug 2009 at 09:36 |
|
|
Title: towbar for sale Post by r1 on 09. Aug 2009 at 09:36
witter towbar from 97 saloon pre face lift
30pounds im in nottingham but will deliver for petrol money will swop for a 406 saloon towbar |
|
Title: Re: towbar for sale Post by kris on 09. Aug 2009 at 09:58
hi mate. will it a face lift saloon.
|
|
Title: Re: towbar for sale Post by Welung666 on 09. Aug 2009 at 10:04 kris wrote on 09. Aug 2009 at 09:58:
It will fit but you need to check the length of the neck, the facelift bumpers come out further than the pre and mini. |
|
Title: Re: towbar for sale Post by Andy B on 09. Aug 2009 at 10:27 kris wrote on 09. Aug 2009 at 09:58:
Fit a swan neck or detachable Kris ..... they look much nicer/neater. ;) ;) ;) |
|
Title: Re: towbar for sale Post by r1 on 09. Aug 2009 at 19:50 kris wrote on 09. Aug 2009 at 09:58:
dont no but see other replies |
|
Title: Re: towbar for sale Post by Andy B on 09. Aug 2009 at 20:30 r1 wrote on 09. Aug 2009 at 19:50:
It depends if it was made specifically for a preface lift. If you find the thread withthe OE Bosal detachable for a PRE face lift fitted to a face lift, you'll see that the ball is that close to the rear bumper that it makes it un-usable. |
|
Title: Re: towbar for sale Post by r1 on 09. Aug 2009 at 21:25 Andy B wrote on 09. Aug 2009 at 20:30:
dont no if this helps but the ball is approx 5 and half inches away from the bumper |
|
Title: Re: towbar for sale Post by Agemo on 09. Aug 2009 at 22:03
Right, 5 & a half inches clearance is ample on a pre-facelift, but with a facelift bumper, the ball would be a lot closer, I suspect someone on here will give you exact dimensions. ::)
|
|
Title: Re: towbar for sale Post by r1 on 11. Aug 2009 at 18:15
towbar number is g67 and its a witter
|
|
Title: Re: towbar for sale Post by ade52uk on 21. Aug 2009 at 12:59
Hi, just thought I'd let you know, I've just fitted my OE swan neck towbar off my old '96 pre-facelift Omega Saloon to my 2002 Omega. Granted, the towball is close (47mm) to the number plate, but it works !! On a mates Megane, he has one of those plates behind the towball that stops you banging into the bumbers and it has the same 47mm gap. You'll have to make a special bracket though to hang your electrics on though. Looks neat.
Regards, Ade. |
|
Title: Re: towbar for sale Post by Andy B on 21. Aug 2009 at 13:13 ade52uk wrote on 21. Aug 2009 at 12:59:
By rights towbars fitted to cars after 98 have to be type approved you know! ::) :y |
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |