Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl For Sale >> Car Parts, bits For Sale & Wanted >> Few bits neede for a project https://oldsite.omegaowners.com/forum/YaBB.pl?num=1255706578 Message started by amba06128 on 16. Oct 2009 at 16:22

Title: Few bits neede for a project
Post by amba06128 on 16. Oct 2009 at 16:22

I need the following bits for a project I am doing ,so if any one can supply would be grateful and naturally beer tokens will be provided:
1...Centre console internal box..(bit under the lift up arm rest ).
2...The 6 screws with washers that secure the above.
3...About 30cms + of the wiring from both front heated seats with the plug on the end,that connects into the main joiner by door.
4...Leather hand brake gaiter.

All the above is required for a "mini facelift".

Thanks alot

Title: Re: Few bits neede for a project
Post by Welung666 on 16. Oct 2009 at 19:40

I've just broken an 01 facelift CD so can help you out with 3 & 4 :y

Title: Re: Few bits neede for a project
Post by Agemo on 16. Oct 2009 at 19:42

I have tne internal box thing, felt lined, no screws though. ::)

Title: Re: Few bits neede for a project
Post by Welung666 on 16. Oct 2009 at 19:43

Are they standard screws? Phillips head, black coated and about 1/2" long?

Title: Re: Few bits neede for a project
Post by Agemo on 16. Oct 2009 at 19:45

I can't remember what the screws look like, but they have to be standard VX self tappers.

Title: Re: Few bits neede for a project
Post by Welung666 on 16. Oct 2009 at 20:04

Agemo wrote on 16. Oct 2009 at 19:45:

I can't remember what the screws look like, but they have to be standard VX self tappers.

I'll have a look on my mini-fl in the morning and see if I can find half a dozen from the facelift that'll fit then.

That's that one sorted between us Agemo ;)

Title: Re: Few bits neede for a project
Post by amba06128 on 16. Oct 2009 at 20:21

Welung666/Agemo..thanks for looking and getting bits sorted for me ...The screws are about 8mm long and a very small phillips head,and seem to have the washer joined to the screw-head..I managed to chew up the heads of 3 getting them out,and dropped one into the bowels of the center console.
If you guys like to drop me pm with your email addy for payment I can then supply my postal addy,and I still owe you a drink,Welung666,for the diodes a couple of weeks ago.

Title: Re: Few bits neede for a project
Post by Welung666 on 16. Oct 2009 at 20:27

No worries Andrew, let me have a look in the morning to see if I can match up the screws, I'll drop you a PM when I'm done :y

Title: Re: Few bits neede for a project
Post by amba06128 on 16. Oct 2009 at 20:57

Thanks alot,welung666.

Title: Re: Few bits neede for a project
Post by Selseybill on 16. Oct 2009 at 21:04

Welung666 wrote on 16. Oct 2009 at 19:43:

Are they standard screws? Phillips head, black coated and about 1/2" long?

You can get get the black screws that look like they have washers attached from any motor factors or Halfrauds.Comes in packs of 6 or 8

Title: Re: Few bits neede for a project
Post by amba06128 on 16. Oct 2009 at 21:08

You can get get the black screws that look like they have washers attached from any motor factors or Halfrauds.Comes in packs of 6 or 8

Thanks for "headsup"..will wait and see what the other guys can sort out for me .