Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> h/seats
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1260542127

Message started by chelski on 11. Dec 2009 at 14:35

Title: h/seats
Post by chelski on 11. Dec 2009 at 14:35
has any one fitted waeco heated seats if so could someone help with wiring
would be grateful
Darren

Title: Re: h/seats
Post by Ray Watson on 11. Dec 2009 at 15:43
You will probably find that the wiring loom is already present but tied up out the way. As far as I know the loom is the same, just some parts are not connected.
Might be wrong but worth a looky under the seats just in case.
Mine are GREAT!

Title: Re: h/seats
Post by pembroke on 11. Dec 2009 at 16:06

Bionic wrote on 11. Dec 2009 at 15:43:
You will probably find that the wiring loom is already present but tied up out the way. As far as I know the loom is the same, just some parts are not connected.
Might be wrong but worth a looky under the seats just in case.
Mine are GREAT!


It was 3 degrees in Cambridge all day. I turned on my heated seats to 3 and was boiling! Am I the only one that finds the seats to be too hot when set above 2?  :-/

Title: Re: h/seats
Post by amba06128 on 11. Dec 2009 at 16:09
chelski...what issues are you having with the seat heaters?
All the wiring is complete with the waeco kit,needing only connecting to a +12 and earth.
My suggestion was using the existing wiring which is located by the multipoint connector on either side of each front seat.

Title: Re: h/seats
Post by chelski on 11. Dec 2009 at 17:23
what i done now on original loom 2 wires 1 brown 1 red/black connected brown to red and orange to red/black and battery was already dead but when connected it drained what was left so i would imagine i got right this time because power going to them now from old switch
does that sound right now
darren

Title: Re: h/seats
Post by amba06128 on 11. Dec 2009 at 17:31
That sounds correct...Vauxhall seem to use brown as 12volt +,so that should be connected to the Red wire from the kit....strange you have an orange wire as the set I got had a black wire,which does connect to the other side which is red/black.
Are you saying they work now but your battery is just flat ??

Title: Re: h/seats
Post by chelski on 11. Dec 2009 at 17:36
well when connected the scart for old h/seat back in main loom it drained what was left out because door lights was dim but then faded out completely
darren

Title: Re: h/seats
Post by chelski on 11. Dec 2009 at 17:37
oh yer in kit you have 1red and one orange and a ground wire

Title: Re: h/seats
Post by amba06128 on 11. Dec 2009 at 17:40
So is it all working now,just the fact the battery is drained .

Title: Re: h/seats
Post by chelski on 11. Dec 2009 at 17:42
i think so find out in morning but sounds correct now these omegas drive you mad but suppose keeps you busy
thanks for all the help
darren

Title: Re: h/seats
Post by Cliffo B on 11. Dec 2009 at 23:11
Hello all,can I say as far as I know VX have always used the brown wire as - (negative) return to ground. Regret connection as you describe could possibly have blown fuse No14. :-/

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.