Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Chat >> General Car Chat >> Omega handbrake cable... https://oldsite.omegaowners.com/forum/YaBB.pl?num=1260787219 Message started by Robin Hood on 14. Dec 2009 at 10:40

Title: Omega handbrake cable...
Post by Robin Hood on 14. Dec 2009 at 10:40

I’ve searched the forum and checked tradeclub and only come up with one part number (2440462). Is it the same part(s) for saloons and estates? Thanks.

Title: Re: Omega handbrake cable...
Post by Marks DTM Calib on 14. Dec 2009 at 10:43

Yes but, get one from a factors......

Didn;t you need some T2 work doing, been so busy recently!

Title: Re: Omega handbrake cable...
Post by Robin Hood on 14. Dec 2009 at 10:50

Thanks for the reply Mark and yes I do, any evening to suite you. :y

Title: Re: Omega handbrake cable...
Post by Marks DTM Calib on 14. Dec 2009 at 10:53

Can you let me know the engine type (e.g. Z16XE) and I might be able to do it on thursday

Sutton Auto Factors have the cables for sub 20 quid a set

Title: Re: Omega handbrake cable...
Post by Robin Hood on 14. Dec 2009 at 11:11

It’s an early ’03 1.6 Club which I believe is the Z16XE. :y

Title: Re: Omega handbrake cable...
Post by Marks DTM Calib on 14. Dec 2009 at 11:14

So it is 16V and not the 8V plodder

Title: Re: Omega handbrake cable...
Post by Robin Hood on 14. Dec 2009 at 11:23

I'd better check and confirm tonight.

Title: Re: Omega handbrake cable...
Post by Robin Hood on 14. Dec 2009 at 16:44

Definitely a twin cam, but not sure if it’s a Z16XE or X16XEL. The engine number I’ve been given is 20Z57773.

Title: Re: Omega handbrake cable...
Post by Robin Hood on 20. Dec 2009 at 09:09

Was planning to replace the rear brakes and cables today. The parts arrived from the factors but Halshaw’s (dealers) didn’t have the rear pads of all things. Needed to order. :o