hi im looking for a facelift passenger wing and bumper possibly a bonnet(fingers crossed 34L/Nocturno Blue)  and a passenger hid headlight

Can help you with the headlight, have both n/s and o/s no damage..Open to offers welcome to pickup if in the Lincs area.

fudy wrote on 08. Jan 2010 at 14:59:

hi im looking for a facelift passenger wing and bumper possibly a bonnet(fingers crossed 34L/Nocturno Blue)  and a passenger hid headlight

I`ve got `em in silver ::)

Micksomega wrote on 08. Jan 2010 at 22:19:

Can help you with the headlight, have both n/s and o/s no damage..Open to offers welcome to pickup if in the Lincs area.

if you can post it i would be interested!?


RobG wrote on 08. Jan 2010 at 23:06:

I`ve got `em in silver ::)

im going to give it a couple of days to see if i can get a colour match first  :-/

Can pop it over via courier no probs..

My email is m.sibson@ntlworld.com or 01472 508896 if you want to discuss it.

Regards Mick

i will give you a bell 2mora m8

The facelift and pre facelift wings are exactly the same...just the rest that differs :y

MutantCav wrote on 11. Jan 2010 at 00:20:

The facelift and pre facelift wings are exactly the same...just the rest that differs :y

so a 98 one like this will fit?
http://cgi.ebay.co.uk/vauxhall-omega-front-nearside-wing_W0QQitemZ290389986824QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item439c978e08

fudy wrote on 11. Jan 2010 at 14:45:

MutantCav wrote on 11. Jan 2010 at 00:20: The facelift and pre facelift wings are exactly the same...just the rest that differs :y so a 98 one like this will fit? http://cgi.ebay.co.uk/vauxhall-omega-front-nearside-wing_W0QQitemZ290389986824QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item439c978e08

Yeah but you will only get Nocturno blue on a facelift wing.

Elite Pete wrote on 11. Jan 2010 at 15:43:

Yeah but you will only get Nocturno blue on a facelift wing.

it could still be a option if i cannot find a colour match and end up getting one re-sprayed. Ive only found one in nocturno blue so far and it was damaged on the same side :(

my moble double posted :-[

got the wing, bonnet and bumper. still need a passenger hid headlight and the plastic molding that goes below it.

fudy wrote on 16. Jan 2010 at 23:28:

got the wing, bonnet and bumper. still need a passenger hid headlight and the plastic molding that goes below it.

Got one here, but as you know, it`s silver :D

Just removed HID`s from my breaker. Passenger side all OK (adjusters in one piece). Complete with all bulbs, levelling motor and ballast :y

RobG wrote on 17. Jan 2010 at 17:27:

Just removed HID`s from my breaker. Passenger side all OK (adjusters in one piece). Complete with all bulbs, levelling motor and ballast :y

would you be able to post them?

Them as in pass. light & underlight trim? Yep, can`t see it being a problem

RobG wrote on 18. Jan 2010 at 11:22:

Them as in pass. light & underlight trim? Yep, can`t see it being a problem

pm sent

fudy wrote on 18. Jan 2010 at 12:53:

RobG wrote on 18. Jan 2010 at 11:22: Them as in pass. light & underlight trim? Yep, can`t see it being a problem pm sent

have you still got the headlight m8?

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 :y could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day  :)

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 :y could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day  :)

fudy wrote on 19. Jan 2010 at 18:19:

RobG wrote on 19. Jan 2010 at 14:32: Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted sounds good to me m8 :y could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day  :)

Sent a PM yesterday :)

RobG wrote on 20. Jan 2010 at 16:39:

fudy wrote on 19. Jan 2010 at 18:19: RobG wrote on 19. Jan 2010 at 14:32: Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted sounds good to me m8 :y could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day  :) Sent a PM yesterday :)

sorry m8 picked one up today, i never noticed the pm :(  ended up costing me £68 as well :(

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

markomega25 wrote on 26. Jan 2010 at 18:42:

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well. Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:- http://www.everycarpart.co.uk/ but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that. How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

No compound. To fit it, reverse this, courtesy of Wellung666
It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

RobG wrote on 26. Jan 2010 at 19:21:

markomega25 wrote on 26. Jan 2010 at 18:42: I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well. Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:- http://www.everycarpart.co.uk/ but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that. How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome. No compound. To fit it, reverse this, courtesy of Wellung666 It can be done without taking the front bumper off but it's tight. 2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

I just scanned through that and thought to myself "that looks familiar", it was then I re-read it and noticed you'd copied it from me ;D ;D It's been a long day!

Thanks RobG and Wellung666.

The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.

markomega25 wrote on 27. Jan 2010 at 22:49:

Thanks RobG and Wellung666. The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.

Better to pay someone who can (excuse the pun) :)