hi everyone  ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines  y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se       dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx  is engine no x25xe if so    then which crank sensor of the above  is the right one  for my car  any help clearing this up is  v welcome  thanks  :y

Neither !!!!

2.2/2.6/3.2 will NOT fit the 2.5 !!!  there are many crank sensors .. and you MUST have the right one

2.0 8v                                          90493864       £59.50       £53.56       £46.32

2.0 16v to 14194716                                     90458251      £59.50      £53.56      £46.32

2.0 16v from 14194717/31000001                                    9174621      £35.90      £32.36      £27.93

2.5 (early models)                                       90492006      £82.00      £73.80      £63.94

2.5 (later models)                                       90492061      £59.50      £53.56      £46.32

2.6/3.0/3.2                                       90540743      £53.50      £48.20      £41.47

2.0DTi/2.2DTi                                       90540188      £37.00      £33.30      £28.81

U25TD/X25TD                                       90487810      £85.50      £76.95      £66.79



You need to find out which of the 2.5 versions you have ...  the difference is in the electrical plug at the top end under the scuttle

Does that imply the 3L ones are all the same then? ie 90540743      

ians wrote on 10. Feb 2010 at 17:58:

Does that imply the 3L ones are all the same then? ie 90540743

As far as I know ... yup .. :)

theres two crank sensors for the V6. 
   its simples  oval plug or square plug.
    early cars normally sq plug up to bout 1997 then its oval plug 1998 on.

biggriffin wrote on 10. Feb 2010 at 21:05:

theres two crank sensors for the V6.     its simples  oval plug or square plug.     early cars normally sq plug up to bout 1997 then its oval plug 1998 on.

sort of correct ....

but only if you also add ... 2.5 V6

the sensor for the 2.6/3.0/3.2 V6 engines will NOT fit the 2.5 ...

the last engine swap i did was a  3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug.

andy j cdx wrote on 10. Feb 2010 at 17:46:

hi everyone  ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines  y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se       dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx  is engine no x25xe if so    then which crank sensor of the above  is the right one  for my car  any help clearing this up is  v welcome  thanks  :y

Yours will be 90492061 - thats an oval plug one and if you look underneath by the oil filter you should see black plastic end.

biggriffin wrote on 10. Feb 2010 at 21:31:

the last engine swap i did was a  3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug.

pulled a known good one of my old 2.5 and fitted it onto my 3.0 ( both oval plugs )   :y