| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> Breaking 1998 3.0 Manual Elite Saloon in Z146 https://oldsite.omegaowners.com/forum/YaBB.pl?num=1266011608 Message started by Darth Loo-knee on 12. Feb 2010 at 21:53 |
|
|
Title: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 12. Feb 2010 at 21:53
All the Black Leather Seats work even the drivers heated seat :y
Irmscher Wooden Gearknob Bose Sound System Rear Blind 3.0 Cams which will come with Sandwich Plate All the normal Elite parts Pm me if you need any parts :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by mark mv6 on 12. Feb 2010 at 22:09 Darth Loo-knee wrote on 12. Feb 2010 at 21:53:
pm sent :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 12. Feb 2010 at 22:13 unlucky mark mv6 wrote on 12. Feb 2010 at 22:09:
Ok mate cheers :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by serek on 13. Feb 2010 at 00:41 Darth Loo-knee wrote on 12. Feb 2010 at 21:53:
How much post??? thanks |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by sparkyw666. on 13. Feb 2010 at 01:45
head light washer jets how much posted daz :y :y :y :y
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Xplicit 2.0 on 13. Feb 2010 at 20:19
They got xenon headlights? If so are the complete and how much posted? Cheers
oh and I take it it's preface (I will learn one day haha) |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by mark mv6 on 13. Feb 2010 at 20:22
You got me a price yet daz for the maual conversion. :y
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by 2woody on 16. Feb 2010 at 09:35
I'm wanting con rods !
well, actually only one, but I'm open to getting all six if needs be is this possible ? |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Andy B on 16. Feb 2010 at 09:47 2woody wrote on 16. Feb 2010 at 09:35:
Knowing you, it must be for a 'project'! ;) :y :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by 2woody on 16. Feb 2010 at 10:13
well, actually, yes !
it's an ex-plod '98 MV6 estate, bought for not very much money indeed. It had me fooled that it had a busted cam follower, but it turns out that a big end had departed - i couldn't work out if it had spun the bearing. have replaced the actual bearing and at least it runs now, but it does knock slightly, so I'm after a whole rod to correct. the point of the car is for the missus to tow horsey with and to transport the dogs ( it doesn't have to remain smart ). the "project" bit is going to be a very special gearbox ! |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 16. Feb 2010 at 15:31 2woody wrote on 16. Feb 2010 at 09:35:
I have a 2.5 bottom end if its any good to you :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 16. Feb 2010 at 20:46
The Irmscher Steering Wheel has now been Sold :y
I still have the Manual Gearknob for the minute so if your interested let me know. :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Risky Duckfeet on 17. Feb 2010 at 15:07
PM sent
:y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by 2woody on 18. Feb 2010 at 13:23 Darth Loo-knee wrote on 16. Feb 2010 at 15:31:
con-rods different unfortunately |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by unlucky alf on 18. Feb 2010 at 15:22
would you have a n/side projector headlight?,,,ta... :y
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by orkney on 18. Feb 2010 at 17:20
pm sent (or will be within the next few seconds)
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by jones310360 on 18. Feb 2010 at 17:46
Pm for you.Thanks Tony.
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by bobblehed on 28. Feb 2010 at 00:08
How much for the gearbox?
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by mr ICE man on 01. Mar 2010 at 17:42
got the passenger rear doors and maybe boot for sale mate? :y
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by barclay03 on 01. Mar 2010 at 19:20
metal pipework for air con? :-/ as per my past in mechanical section
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 01. Mar 2010 at 21:52 bobblehed wrote on 28. Feb 2010 at 00:08:
Engine and gearbox have been sold mate :y Thanks |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 01. Mar 2010 at 21:53 mr ICE man wrote on 01. Mar 2010 at 17:42:
The rear doors were rusty as old iron mate sorry but the boot door sold :y Cheers |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 01. Mar 2010 at 21:54 barclay03 wrote on 01. Mar 2010 at 19:20:
Have not seem your mechanical post I'm afraid :( The aircon went with the engine :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by barclay03 on 02. Mar 2010 at 09:43 Darth Loo-knee wrote on 01. Mar 2010 at 21:54:
Ah... no worries :y |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by doog on 04. Mar 2010 at 23:15
do you have a passenger side rear light (outer part on body of the car not the boot part)
Doug |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by gra11 on 04. Mar 2010 at 23:21
yellow plug mid? *crosses fingers*
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 05. Mar 2010 at 20:15 gra11 wrote on 04. Mar 2010 at 23:21:
I have not had one with the yellow plug for a while :-? |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by gra11 on 05. Mar 2010 at 21:07
darn it. I can't get a hold of one for love nor money!
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 05. Mar 2010 at 21:18 gra11 wrote on 05. Mar 2010 at 21:07:
What year is your car? I was sure the yellow connection was on the earlier ones :-? |
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by gra11 on 05. Mar 2010 at 22:05
96' its definitely a yellow as i tried the fix for them the other night but managed to knacker it completely ;D
|
|
Title: Re: Breaking 1998 3.0 Manual Elite Saloon in Z146 Post by Darth Loo-knee on 05. Mar 2010 at 22:06 gra11 wrote on 05. Mar 2010 at 22:05:
Thought they were only on early ones :( |
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |