Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> Breaking Black 1998 MV6 Saloon
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1268766839

Message started by Darth Loo-knee on 16. Mar 2010 at 20:13

Title: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 16. Mar 2010 at 20:13
It has Facelift MV6 Wheels is very good condition with tyres.
Black MV6 Leather Interior with Leather Doorcards with the Carbon effect on them (not wood)
Irmscher Springs all round & Bilstein Shocks
Mint AR 35 gearbox which has not long since has the filter, gaskets & oil changed.
Swan Necked Towbar that after removing two bolts the towbar cant be seen.

This car has been like a Baby to me but its time for it to move on.
Please don't ask how much for the whole car as I am having certain parts myself so it is being broken.

Anyone intersted in any parts please PM, after about a week or so on here I will be listing parts on fleabay for obviously more.

Cheers
:y


Title: Re: Breaking Black 1998 MV6 Saloon
Post by Jimbob on 16. Mar 2010 at 20:42
RIP Vader  :'(

Title: Re: Breaking Black 1998 MV6 Saloon
Post by tigers_gonads on 16. Mar 2010 at 20:50
pm sent

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Albs on 16. Mar 2010 at 20:52
Deja vu ! ::) :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 16. Mar 2010 at 21:02

tigers_gonads wrote on 16. Mar 2010 at 20:50:
pm sent



And Replied :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 16. Mar 2010 at 21:03

Albs wrote on 16. Mar 2010 at 20:52:
Deja vu ! ::) :)



But this time Vader will be leaving the building  :-[

Title: Re: Breaking Black 1998 MV6 Saloon
Post by hotel21 on 16. Mar 2010 at 21:24
Shame that Vader has to go, son, but its life.....  You will get another puppy......   :'(

ps - bung the two plastic caps off the front strut tops into a bag and send them to me, so I have something to remember him by, theres a good lad......   ;D

http://www.omegaowners.com/forum/YaBB.pl?num=1268606435

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 16. Mar 2010 at 21:27

hotel21 wrote on 16. Mar 2010 at 21:24:
Shame that Vader has to go, son, but its life.....  You will get another puppy......   :'(

ps - bung the two plastic caps off the front strut tops into a bag and send them to me, so I have something to remember him by, theres a good lad......   ;D

http://www.omegaowners.com/forum/YaBB.pl?num=1268606435


Not sure if they are there Dad but will have a look as its you :-*

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 17. Mar 2010 at 17:37
Irmscher Springs & Shocks now Sold

Thanks :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 17. Mar 2010 at 18:02
Rear Blind Sold
Thanks
:y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 17. Mar 2010 at 20:29

Darth Loo-knee wrote on 17. Mar 2010 at 17:37:
Irmscher Springs & Shocks now Sold

Thanks :y

bugger

Title: Re: Breaking Black 1998 MV6 Saloon
Post by evo1968 on 17. Mar 2010 at 22:18
pm sent  ;D

Title: Re: Breaking Black 1998 MV6 Saloon
Post by gra11 on 17. Mar 2010 at 23:21
any chance there is a yellow plug mid you want to part with? 

Title: Re: Breaking Black 1998 MV6 Saloon
Post by MutantCav on 18. Mar 2010 at 08:48
How much for the wheels? :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by sjc on 18. Mar 2010 at 09:31
How much for the tow bar?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by cmeonthemove on 18. Mar 2010 at 14:37
Noooooooo You can't break Vader!!!

After the driver's door pin if you still have it.

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 18. Mar 2010 at 19:30
Wheels have now gone too :y

Cheers

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 18. Mar 2010 at 19:31

gra11 wrote on 17. Mar 2010 at 23:21:
any chance there is a yellow plug mid you want to part with? 


This is the later one mate I'm afraid sorry :-[

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 18. Mar 2010 at 19:31

sjc wrote on 18. Mar 2010 at 09:31:
How much for the tow bar?



Pm sent mate :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by AmigoMV6 on 18. Mar 2010 at 20:46
Shame you're letting her go mate, we all loved her...
.....must be something good on the cards!!! ::)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Martin Imber on 18. Mar 2010 at 22:02
WHAT ARE YOU DOING?

YOU CAN'T SCRAP VADER HE IS FAMOUS :o :o :o :o

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Lazydocker on 18. Mar 2010 at 23:35
Daz, have you got any air filter box clips kicking about? Could do with a few

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 18. Mar 2010 at 23:44
Can I bagsey the front steering knuckles/axles as previously discussed at some point.


Title: Re: Breaking Black 1998 MV6 Saloon
Post by cmeonthemove on 18. Mar 2010 at 23:51
Also can I have the Darth Vader on the dash - I think that's a special edition :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by robbo2345 on 19. Mar 2010 at 01:21
:( :( oh no vader is going ! but you can bet there is good replacement :-? :-?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by ScottieMV6 on 19. Mar 2010 at 18:54
Daz any chance you are selling the engine??

Just out of curiosity because I will not be able to afford it but how much? ::)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Zuffenhausen on 19. Mar 2010 at 19:03
How much for the front seats?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by evo1968 on 19. Mar 2010 at 20:17
have you got the carbon trim from around the heater controls and the ashtray.cheers

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 19. Mar 2010 at 21:17

ScottieMV6 wrote on 19. Mar 2010 at 18:54:
Daz any chance you are selling the engine??

Just out of curiosity because I will not be able to afford it but how much? ::)


Not selling this engine no but I may have another engine for sale ;)

That sounds rather strange too "Just out of curiosity because I will not be able to afford it but how much?" why would you want to no if you have no intention of buying it :-?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 19. Mar 2010 at 21:23

TheBoy wrote on 18. Mar 2010 at 23:44:
Can I bagsey the front steering knuckles/axles as previously discussed at some point.


I already have a pair off these too one side for you  ;)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 19. Mar 2010 at 21:24

evo1968 wrote on 19. Mar 2010 at 20:17:
have you got the carbon trim from around the heater controls and the ashtray.cheers



PM sent mate
Thanks :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 19. Mar 2010 at 21:25

Lazydocker wrote on 18. Mar 2010 at 23:35:
Daz, have you got any air filter box clips kicking about? Could do with a few


Sorry mate used the Airbox  :-[

Title: Re: Breaking Black 1998 MV6 Saloon
Post by evo1968 on 19. Mar 2010 at 23:11
pm sent mate,cheers.what happened about the vectra mate?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 19. Mar 2010 at 23:45

Darth Loo-knee wrote on 19. Mar 2010 at 21:23:

TheBoy wrote on 18. Mar 2010 at 23:44:
Can I bagsey the front steering knuckles/axles as previously discussed at some point.


I already have a pair off these too one side for you  ;)

:y :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by ScottieMV6 on 20. Mar 2010 at 11:06

Darth Loo-knee wrote on 19. Mar 2010 at 21:17:

ScottieMV6 wrote on 19. Mar 2010 at 18:54:
Daz any chance you are selling the engine??

Just out of curiosity because I will not be able to afford it but how much? ::)


Not selling this engine no but I may have another engine for sale ;)

That sounds rather strange too "Just out of curiosity because I will not be able to afford it but how much?" why would you want to no if you have no intention of buying it :-?


Bit harsh Daz?

All I was saying was that I am a bit strapped right now but wanted to know how much it was in case I might sort something out ::) I didn't say at any point that i had no intention of buying it :-/

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 20. Mar 2010 at 23:43

ScottieMV6 wrote on 20. Mar 2010 at 11:06:

Darth Loo-knee wrote on 19. Mar 2010 at 21:17:

ScottieMV6 wrote on 19. Mar 2010 at 18:54:
Daz any chance you are selling the engine??

Just out of curiosity because I will not be able to afford it but how much? ::)


Not selling this engine no but I may have another engine for sale ;)

That sounds rather strange too "Just out of curiosity because I will not be able to afford it but how much?" why would you want to no if you have no intention of buying it :-?


Bit harsh Daz?

All I was saying was that I am a bit strapped right now but wanted to know how much it was in case I might sort something out ::) I didn't say at any point that i had no intention of buying it :-/


Think you should have Pm'd Scott as this seems to be going out of hand :(

Title: Re: Breaking Black 1998 MV6 Saloon
Post by ScottieMV6 on 21. Mar 2010 at 11:42

Darth Loo-knee wrote on 20. Mar 2010 at 23:43:

ScottieMV6 wrote on 20. Mar 2010 at 11:06:

Darth Loo-knee wrote on 19. Mar 2010 at 21:17:

ScottieMV6 wrote on 19. Mar 2010 at 18:54:
Daz any chance you are selling the engine??

Just out of curiosity because I will not be able to afford it but how much? ::)


Not selling this engine no but I may have another engine for sale ;)

That sounds rather strange too "Just out of curiosity because I will not be able to afford it but how much?" why would you want to no if you have no intention of buying it :-?


Bit harsh Daz?

All I was saying was that I am a bit strapped right now but wanted to know how much it was in case I might sort something out ::) I didn't say at any point that i had no intention of buying it :-/


Think you should have Pm'd Scott as this seems to be going out of hand :(


My apologies Daz. :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by andy_driver on 22. Mar 2010 at 15:53
hi mate what condition are both rear doors in .
as i need both cause mine have the dreeded tin worm in both arch part of the doors .
how much would you like for them 

Title: Re: Breaking Black 1998 MV6 Saloon
Post by evo1968 on 22. Mar 2010 at 19:42
pm sent mate.

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 22. Mar 2010 at 21:25

andy_driver wrote on 22. Mar 2010 at 15:53:
hi mate what condition are both rear doors in .
as i need both cause mine have the dreeded tin worm in both arch part of the doors .
how much would you like for them 



The drivers rear door has a little rust on it but the passenger is fine :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 22. Mar 2010 at 21:27

evo1968 wrote on 22. Mar 2010 at 19:42:
pm sent mate.


Replied mate :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by flexbuttcheck1 on 23. Mar 2010 at 00:12
do you still have the seats and door cards,if so where in the country are you, and how much? ta!

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 23. Mar 2010 at 10:06
I have just replied to you mate

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 28. Mar 2010 at 13:51
Seats and Door Cards have now been sold
Thanks :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by UrbanFox on 28. Mar 2010 at 14:39
Do you still have the doors?  How much for all 4 if you do?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 28. Mar 2010 at 19:19

UrbanFox wrote on 28. Mar 2010 at 14:39:
Do you still have the doors?  How much for all 4 if you do?


Drivers door has gone :y

Someone is intrested in the rear doors though  :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by gstylebaby on 28. Mar 2010 at 22:07
Daz did yours have the black trim on the inside sill only i'm after the drivers side and the two black strips with the vauxhall emblem printed in.

Title: Re: Breaking Black 1998 MV6 Saloon
Post by MadMark73 on 29. Mar 2010 at 00:23
Hi. Is the gearbox still available?


Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 29. Mar 2010 at 09:44
The silly little black bits of plastic that cover the screws that hold rear bumper on. 4 of 'em.

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 29. Mar 2010 at 09:45
Oh, and vac tank - I noticed mine was busted when I lobbed the bagpipes in the boot  :'(

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Zuffenhausen on 29. Mar 2010 at 11:59
Do you have the O/S headlight washer piece that is screwed to the headlight that the jets plug into?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 29. Mar 2010 at 12:36

Zuffenhausen wrote on 29. Mar 2010 at 11:59:
Do you have the O/S headlight washer piece that is screwed to the headlight that the jets plug into?

That sounds like a man who has been using too weak screen wash ;D ;D ;D

Been there, done that  :-[

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Zuffenhausen on 29. Mar 2010 at 17:32

Quote:
That sounds like a man who has been using too weak screen wash   

Been there, done that   


Nope snapped a piece off the end when I changed the headlights.   :-[  :'(

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 29. Mar 2010 at 18:11

Zuffenhausen wrote on 29. Mar 2010 at 17:32:

Quote:
That sounds like a man who has been using too weak screen wash   

Been there, done that   


Nope snapped a piece off the end when I changed the headlights.   :-[  :'(

Ouch!  £55 new  :'(

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Zuffenhausen on 29. Mar 2010 at 20:18

Quote:
Quote:
That sounds like a man who has been using too weak screen wash   

Been there, done that   

Nope snapped a piece off the end when I changed the headlights.   
   
Ouch!  £55 new   


Hence the search fo a used one.   :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by UrbanFox on 29. Mar 2010 at 21:00
no worries re the doors!  I'll keep on the hunt!

I could do with the air vents from the dash and the rear vents in the centre arm rest, and the black radiator covers if you still have them? 

Thanks..

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 29. Mar 2010 at 21:43

gstylebaby wrote on 28. Mar 2010 at 22:07:
Daz did yours have the black trim on the inside sill only i'm after the drivers side and the two black strips with the vauxhall emblem printed in.



Sorry mate they hae sold :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 29. Mar 2010 at 21:44

MadMark73 wrote on 29. Mar 2010 at 00:23:
Hi. Is the gearbox still available?


Both Gearboxes have gone sorry :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 29. Mar 2010 at 21:46

Zuffenhausen wrote on 29. Mar 2010 at 17:32:

Quote:
That sounds like a man who has been using too weak screen wash   

Been there, done that   


Nope snapped a piece off the end when I changed the headlights.   :-[  :'(



Yes I think I have a few, I will check :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 29. Mar 2010 at 21:46

UrbanFox wrote on 29. Mar 2010 at 21:00:
no worries re the doors!  I'll keep on the hunt!

I could do with the air vents from the dash and the rear vents in the centre arm rest, and the black radiator covers if you still have them? 

Thanks..



I do have the above parts you need :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 29. Mar 2010 at 21:48

TheBoy wrote on 29. Mar 2010 at 09:45:
Oh, and vac tank - I noticed mine was busted when I lobbed the bagpipes in the boot  :'(


Sorry Jaime the Vac Tank I am saving :y
Oh and the black clips will be going with the bumper :-? :-[

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Jim on 29. Mar 2010 at 23:45
Are both radiators still avaliable, as I have just found out that the radiator for a 2.5/3.0 is the same as the 2.6/3.2
Part Number: 52463050 for the main radiator

Title: Re: Breaking Black 1998 MV6 Saloon
Post by UrbanFox on 30. Mar 2010 at 09:13

Darth Loo-knee wrote on 29. Mar 2010 at 21:46:

UrbanFox wrote on 29. Mar 2010 at 21:00:
no worries re the doors!  I'll keep on the hunt!

I could do with the air vents from the dash and the rear vents in the centre arm rest, and the black radiator covers if you still have them? 

Thanks..



I do have the above parts you need :y


How much please mate?

:y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by TheBoy on 30. Mar 2010 at 10:34

Darth Loo-knee wrote on 29. Mar 2010 at 21:48:
[quote author=704C41664B5D240 link=1268766839/49#49 date=1269852349]Oh, and vac tank - I noticed mine was busted when I lobbed the bagpipes in the boot  :'(


Sorry Jaime the Vac Tank I am saving :y
Oh and the black clips will be going with the bumper :-? :-[/quote]
No worries, trip to scrappies for me then :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Matchless on 30. Mar 2010 at 13:49
Jamie, the tank on the heating is the same as the one on the bagpipes, its just stuck onto the pollen filter frame.....hack one out. Non-return valve is less likely to have been snapped off.

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Matchless on 30. Mar 2010 at 13:51
Daz, is the engine out yet / can I request a passout from swimbo to play with steering boxes?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 30. Mar 2010 at 17:28

Jim wrote on 29. Mar 2010 at 23:45:
Are both radiators still avaliable, as I have just found out that the radiator for a 2.5/3.0 is the same as the 2.6/3.2
Part Number: 52463050 for the main radiator


I do have both a Manual and 2 Auto Radiators Jim :y one of the Auto Rads has the extra gearbox oil cooler on it too ;)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 30. Mar 2010 at 17:30

Matchless wrote on 30. Mar 2010 at 13:51:
Daz, is the engine out yet / can I request a passout from swimbo to play with steering boxes?


I will be removing it after Easter now  :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Jim on 30. Mar 2010 at 18:38

Darth Loo-knee wrote on 30. Mar 2010 at 17:28:

Jim wrote on 29. Mar 2010 at 23:45:
Are both radiators still avaliable, as I have just found out that the radiator for a 2.5/3.0 is the same as the 2.6/3.2
Part Number: 52463050 for the main radiator


I do have both a Manual and 2 Auto Radiators Jim :y one of the Auto Rads has the extra gearbox oil cooler on it too ;)

Do you also have the air con radiator

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 30. Mar 2010 at 20:41

Jim wrote on 30. Mar 2010 at 18:38:

Darth Loo-knee wrote on 30. Mar 2010 at 17:28:

Jim wrote on 29. Mar 2010 at 23:45:
Are both radiators still avaliable, as I have just found out that the radiator for a 2.5/3.0 is the same as the 2.6/3.2
Part Number: 52463050 for the main radiator


I do have both a Manual and 2 Auto Radiators Jim :y one of the Auto Rads has the extra gearbox oil cooler on it too ;)

Do you also have the air con radiator


Vaders aint up to much being honest, but I think I do have one but would need to check when I get back from the easter week :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by SnakePliskin on 30. Mar 2010 at 21:57
Doorcards/Power Steering Pump/Heater Matrix/Carbon Ashtray with Insert

££ ??

Title: Re: Breaking Black 1998 MV6 Saloon
Post by jester1905 on 30. Mar 2010 at 22:38
Don't supose you have an offside headlamp washer jet nozzle ???

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 30. Mar 2010 at 23:13

SnakePliskin wrote on 30. Mar 2010 at 21:57:
Doorcards/Power Steering Pump/Heater Matrix/Carbon Ashtray with Insert

££ ??



I have a set of black leather door cards with the wood effect, you can easily swap the wood for the carbon effect though.

The rest you are after have been sold mate, thanks  :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 30. Mar 2010 at 23:14

jester1905 wrote on 30. Mar 2010 at 22:38:
Don't supose you have an offside headlamp washer jet nozzle ???



I did they have all gone sorry. :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by SnakePliskin on 30. Mar 2010 at 23:24
How much for the doorcards matey posted?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Jim on 30. Mar 2010 at 23:41

Darth Loo-knee wrote on 30. Mar 2010 at 20:41:

Jim wrote on 30. Mar 2010 at 18:38:

Darth Loo-knee wrote on 30. Mar 2010 at 17:28:

Jim wrote on 29. Mar 2010 at 23:45:
Are both radiators still avaliable, as I have just found out that the radiator for a 2.5/3.0 is the same as the 2.6/3.2
Part Number: 52463050 for the main radiator


I do have both a Manual and 2 Auto Radiators Jim :y one of the Auto Rads has the extra gearbox oil cooler on it too ;)

Do you also have the air con radiator


Vaders aint up to much being honest, but I think I do have one but would need to check when I get back from the easter week :y

No worries mate, let me know

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Marks DTM Calib on 31. Mar 2010 at 08:40
Aircon condenser with receiver dryer:

http://cgi.ebay.co.uk/OMEGA-B-CONDENSER-RADIATOR-RECEIVER-DRIER-16-6554_W0QQitemZ320452923600QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4a9c7b90d0

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Jim on 31. Mar 2010 at 09:06

Marks DTM Calib wrote on 31. Mar 2010 at 08:40:
Aircon condenser with receiver dryer:

http://cgi.ebay.co.uk/OMEGA-B-CONDENSER-RADIATOR-RECEIVER-DRIER-16-6554_W0QQitemZ320452923600QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4a9c7b90d0

Cheers Mark :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by omegadti on 31. Mar 2010 at 19:53
did you sell the towbar?

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 31. Mar 2010 at 22:09

omegadti wrote on 31. Mar 2010 at 19:53:
did you sell the towbar?


Have had someone say they are interested but I have not seen any money so yes it is still for sale :)

Title: Re: Breaking Black 1998 MV6 Saloon
Post by omegadti on 31. Mar 2010 at 22:32
can you pm me with price

Title: Re: Breaking Black 1998 MV6 Saloon
Post by PhilCavSRi130 on 01. Apr 2010 at 00:19
Have you got a pair of the throttle body to inlet pipes for the later extended plenum? If so how much for the pair please?

:y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 03. Apr 2010 at 11:06

PhilCavSRi130 wrote on 01. Apr 2010 at 00:19:
Have you got a pair of the throttle body to inlet pipes for the later extended plenum? If so how much for the pair please?

:y


Pm sent mate :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by markrambo on 03. Apr 2010 at 11:13
HI THERE MATE HOW MUCH DO YOU NEED FOR YOUR TOW BAR AND WERE ARE YOU MARK

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 03. Apr 2010 at 11:19

markrambo wrote on 03. Apr 2010 at 11:13:
HI THERE MATE HOW MUCH DO YOU NEED FOR YOUR TOW BAR AND WERE ARE YOU MARK



Hi mate Pm sent :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Darth Loo-knee on 03. Apr 2010 at 19:04
Towbar now Sold thanks :y

Title: Re: Breaking Black 1998 MV6 Saloon
Post by Matchless on 06. Apr 2010 at 23:13
Daz, save a dk grey fuse box cover for me.....I broke the hinge off mine tonight.  :-[

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.