Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening  :y

Not even paid for any of it yet  :o

Good to see he's back to glowing reports i read previously  :y

tunnie wrote on 24. Mar 2010 at 13:06:

Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening  :y Not even paid for any of it yet  :o Good to see he's back to glowing reports i read previously  :y

Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y

TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y

Lazydocker wrote on 24. Mar 2010 at 13:27:

tunnie wrote on 24. Mar 2010 at 13:06: Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening  :y Not even paid for any of it yet  :o Good to see he's back to glowing reports i read previously  :y Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y

odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either!  :o

tunnie wrote on 24. Mar 2010 at 13:30:

odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either!  :o

Very true actually.

It's ok until you get one maintaining an aircraft where paperwork is vital.  :-X

Kevin

tunnie wrote on 24. Mar 2010 at 13:30:

Lazydocker wrote on 24. Mar 2010 at 13:27: tunnie wrote on 24. Mar 2010 at 13:06: Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening  :y Not even paid for any of it yet  :o Good to see he's back to glowing reports i read previously  :y Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either!  :o

He's still working very closely with me to try and solve the "Lag" we V6 owners are suffering and replacing the filter was an elimination thing... He may not even charge me as it was his suggestion :y :y Let's be honest, his aftercare (as far as I'm concerned) has been impeccable and that's why I keep putting people on to him :y :y

Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished.  ;D ;D ;D ;) :y

PhilRich wrote on 24. Mar 2010 at 16:44:

Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished.  ;D ;D ;D ;) :y

I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;)

Lazydocker wrote on 24. Mar 2010 at 16:56:

PhilRich wrote on 24. Mar 2010 at 16:44: Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished.  ;D ;D ;D ;) :y I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;)

Count me in. :y I have a full set of V6 pictures.

Kevin

Thankyou guys, i'm really looking forward to 'seeing' the finished job. I'm also quite excited about trying this for myself at some point in the not too distant future, & as I live in the frozen wastes of the North (& I don't just mean the weather!!) I can't expect too much in the way of 'hands on' help by clued up members lol  ;D ;) :y

Kevin Wood wrote on 24. Mar 2010 at 17:04:

Lazydocker wrote on 24. Mar 2010 at 16:56: PhilRich wrote on 24. Mar 2010 at 16:44: Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished.  ;D ;D ;D ;) :y I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;) Count me in. :y I have a full set of V6 pictures. Kevin

Already had ::) ::)

I reckon that between yours, mine and the ones taken this weekend we have enough to cover most eventualities :y

I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my birdsh1t welding so perhaps we should make a more presentable version?  ;)

Kevin

Kevin Wood wrote on 24. Mar 2010 at 17:15:

I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my birdsh1t welding so perhaps we should make a more presentable version?  ;) Kevin

I don't believe for a minute it's as bad as that Kevin  ;D :y

Got my camera ready here and charged too  :y

PhilRich wrote on 24. Mar 2010 at 17:25:

Kevin Wood wrote on 24. Mar 2010 at 17:15: I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my birdsh1t welding so perhaps we should make a more presentable version?  ;) Kevin I don't believe for a minute it's as bad as that Kevin  ;D :y

.. and I've been polite enough not to mention Chrisgixer's "angle grinder art" in making the necessary cuts. ;D

Kevin