Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> Breaking: Champagne (Z489) Elite (Facelift)
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1271433353

Message started by TheBoy on 16. Apr 2010 at 16:55

Title: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 16. Apr 2010 at 16:55
All non engine parts available.

Title: Re: Breaking: Champagne Elite (Facelift)
Post by HNO3GOH on 16. Apr 2010 at 17:57
Saloon or estate :y

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Del Boy on 16. Apr 2010 at 18:20

HNO3GOH wrote on 16. Apr 2010 at 17:57:
Saloon or estate :y

It's a saloon  :y

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Shane dub rydda on 16. Apr 2010 at 18:26
do u have a trip computer screen and a wiper stalk bud?? :y

Title: Re: Breaking: Champagne Elite (Facelift)
Post by mantahatch on 16. Apr 2010 at 19:50
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Searcher on 16. Apr 2010 at 20:35

TheBoy wrote on 16. Apr 2010 at 16:55:
All non engine parts available.


Private message awaits.

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 09:30
Blind sold - I could have sold it 10 times over by the look of it ;D

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 09:32

Shane dub rydda wrote on 16. Apr 2010 at 18:26:
do u have a trip computer screen and a wiper stalk bud?? :y

Facelift MID and saloon stalk with S/R buttons for MID, and the variable dial for inttermittent wipe. Is that what you're after?

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 09:33

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Andy B on 17. Apr 2010 at 09:55

TheBoy wrote on 17. Apr 2010 at 09:33:

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/


Swap boot lids!  :y  :y  :y  :y

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Elite Pete on 17. Apr 2010 at 10:28

TheBoy wrote on 17. Apr 2010 at 09:33:

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/

Its bonded and you'll have to damage the bootlid to get it off. Take a chiesel and bash the boot lid down and away from the spoiler ;)

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Ploppy on 17. Apr 2010 at 12:05
Hi,
do you have the walnut facia, walnut ash tray , gear surround for sale?

Regards

Ploppy

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 12:08

Ploppy wrote on 17. Apr 2010 at 12:05:
Hi,
do you have the walnut facia, walnut ash tray , gear surround for sale?

Regards

Ploppy

Let me get photos of them to show condition.  The astray is broken, but the 'wood effect' plastic unclips and can go on the non wood ones (the astray mechanism is the same across all facelifts, its the front plastic the clip over that differs).

This is a 2000 car, so has the 'darker' type 'wood', not the glossy type fitted from 2001 onwards.

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Mr Hagon on 17. Apr 2010 at 12:15
Is the variable wiper stalk still available?

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 12:16

TheBoy wrote on 17. Apr 2010 at 12:08:

Ploppy wrote on 17. Apr 2010 at 12:05:
Hi,
do you have the walnut facia, walnut ash tray , gear surround for sale?

Regards

Ploppy

Let me get photos of them to show condition.  The astray is broken, but the 'wood effect' plastic unclips and can go on the non wood ones (the astray mechanism is the same across all facelifts, its the front plastic the clip over that differs).

This is a 2000 car, so has the 'darker' type 'wood', not the glossy type fitted from 2001 onwards.

Camera is as flat as a witch's chest.  Just been out and visually checked - no real marks I can see, even in handbrake well where stuff is normally thrown!

Can't judge postage costs until removed, £20 + p&p for the 3 wood effect pieces (but not astray mechanism, which is destined for bin)?

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 12:17

Mr Hagon wrote on 17. Apr 2010 at 12:15:
Is the variable wiper stalk still available?

Awaiting reply from shane dub rydda, as he asked first :y

Title: Re: Breaking: Champagne Elite (Facelift)
Post by Mr Hagon on 17. Apr 2010 at 12:18

TheBoy wrote on 17. Apr 2010 at 12:17:

Mr Hagon wrote on 17. Apr 2010 at 12:15:
Is the variable wiper stalk still available?

Awaiting reply from shane dub rydda, as he asked first :y

Guessed as much, but if he changes his mind then I'm interested  :y.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 17. Apr 2010 at 12:21
Sure sounds fair,,, photos would be great if possible,

Thanks Ploppy :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Shane dub rydda on 17. Apr 2010 at 12:25
yes im after both matey :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 12:36

Ploppy wrote on 17. Apr 2010 at 12:21:
Sure sounds fair,,, photos would be great if possible,

Thanks Ploppy :y

Sorry for poor cameraphone images, can't find charger for my camera






Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 17. Apr 2010 at 12:49
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

Ploppy

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 12:54

Ploppy wrote on 17. Apr 2010 at 12:49:
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

Ploppy

I don't know, would guess manual gearbox has different section  :-/.  Tunnie has an auto and manual to compare....

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by olliejm on 17. Apr 2010 at 12:55
Hi

I'm looking for a pair of electric door mirrors, a drivers door c
locking motor and solenoid, front centre armrest (the catch has gone on mine, do you have any of these and, if so, how much would you want for them?

Cheers

Ollie

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 13:04

olliejm wrote on 17. Apr 2010 at 12:55:
Hi

I'm looking for a pair of electric door mirrors, a drivers door c
locking motor and solenoid, front centre armrest (the catch has gone on mine, do you have any of these and, if so, how much would you want for them?

Cheers

Ollie

Mirrors.
These are Elite mirrors, so have the feedback circuits in, cost a fortune to buy. Passenger one has a suspect feedback circuit (using the memory, often gets the height wrong!). They have a couple of marks - it is 10yrs old. Thus £35 for drivers, £15 for passenger.

Drivers CDL - £10

Centre console - this one is destined for bin as well ;D

All plus fair p&p (or collection if you nearby)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Elite Pete on 17. Apr 2010 at 13:54
Is the stereo staying ::)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Del Boy on 17. Apr 2010 at 14:12

Ploppy wrote on 17. Apr 2010 at 12:49:
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

Ploppy

Auto surrounds are different  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy B on 17. Apr 2010 at 14:19

Del Boy wrote on 17. Apr 2010 at 14:12:

Ploppy wrote on 17. Apr 2010 at 12:49:
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

Ploppy

Auto surrounds are different  :y


They don't look too disimilar  :-/



Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Miggster on 17. Apr 2010 at 14:22

Ploppy wrote on 17. Apr 2010 at 12:49:
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

sorry poppy, it won't fit a manual version, the holes are different shape

Ploppy


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Elite Pete on 17. Apr 2010 at 14:24

Andy B wrote on 17. Apr 2010 at 14:19:

Del Boy wrote on 17. Apr 2010 at 14:12:

Ploppy wrote on 17. Apr 2010 at 12:49:
L:ooks good to me...

hopefully would still fit a manual version?

please pm me and we can sort out payment etc

~regards

Ploppy

Auto surrounds are different  :y


They don't look too disimilar  :-/


I thought they were the same on a facelift :)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy B on 17. Apr 2010 at 14:35

Miggster wrote on 17. Apr 2010 at 14:22:
....
sorry poppy, it won't fit a manual version, the holes are different shape ....


Which hole are you saying is different? They both look the same to me. ie the slightly rounded rectangle that manual gaitor clips to and the whole auto trim with PRN etc & the sports button.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lazydocker on 17. Apr 2010 at 15:13
If the Bose sound system is being split up I could do with a front door speaker.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Missy MV6 on 17. Apr 2010 at 16:09
Is the rear passenger light (the boot bit) for sale..Mines got the corner missing?
Angie x

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 17. Apr 2010 at 17:02
Centres are the same for manual and auto in the facelift  :y


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Del Boy on 17. Apr 2010 at 17:06

VXL V6 wrote on 17. Apr 2010 at 17:02:
Centres are the same for manual and auto in the facelift  :y

There was me looking for ages for a manual one when I had mine  ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 19:11

Elite Pete wrote on 17. Apr 2010 at 13:54:
Is the stereo staying ::)

Which stereo - the ccr2006?  Its not a Bose one.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 17. Apr 2010 at 19:13

Missy MV6 wrote on 17. Apr 2010 at 16:09:
Is the rear passenger light (the boot bit) for sale..Mines got the corner missing?
Angie x

I shall check its condition for you (and work out how it comes off!!)

Title: Re: Breaking: Champagne Elite (Facelift)
Post by mantahatch on 17. Apr 2010 at 19:21

TheBoy wrote on 17. Apr 2010 at 09:33:

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/



OK would I be able to buy the bootlid with spoiler attached please.

Thanks

Mike

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by shaggydog on 17. Apr 2010 at 19:22
I'm after a front tow eye cover.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Missy MV6 on 17. Apr 2010 at 21:24

TheBoy wrote on 17. Apr 2010 at 19:13:

Missy MV6 wrote on 17. Apr 2010 at 16:09:
Is the rear passenger light (the boot bit) for sale..Mines got the corner missing?
Angie x

I shall check its condition for you (and work out how it comes off!!)


Okey dokey  :y
Angie x

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 18. Apr 2010 at 01:57
Cool

well if they are the same `i will take them....

pm please

Thanks Ploppy :D

Title: Re: Breaking: Champagne Elite (Facelift)
Post by TheBoy on 18. Apr 2010 at 09:36

Mantahatch wrote on 17. Apr 2010 at 19:21:

TheBoy wrote on 17. Apr 2010 at 09:33:

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/



OK would I be able to buy the bootlid with spoiler attached please.

Thanks

Mike

Are you in a hurry - as I'm stripping this slowly, as and when I get a bit of time, I am trying to keep the car 'waterproof', esp as I'm using the boot for storage ;D.  Thus want to keep boot in tact for a bit longer

Title: Re: Breaking: Champagne Elite (Facelift)
Post by mantahatch on 18. Apr 2010 at 12:53

TheBoy wrote on 18. Apr 2010 at 09:36:

Mantahatch wrote on 17. Apr 2010 at 19:21:

TheBoy wrote on 17. Apr 2010 at 09:33:

Mantahatch wrote on 16. Apr 2010 at 19:50:
Does it have a rear spoiler, if so would be very interested.

Thanks

Mike

Yes, no idea if/how it attaches to bootlid  :-/



OK would I be able to buy the bootlid with spoiler attached please.

Thanks

Mike

Are you in a hurry - as I'm stripping this slowly, as and when I get a bit of time, I am trying to keep the car 'waterproof', esp as I'm using the boot for storage ;D.  Thus want to keep boot in tact for a bit longer




No hurry, whenever your ready just let me no  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 18. Apr 2010 at 17:09
Hi,

have you got the wiring loom to both illuminated sun visors.... got the visors just missing the loom...

regards


Ploppy :D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 18. Apr 2010 at 19:37

Ploppy wrote on 18. Apr 2010 at 17:09:
Hi,

have you got the wiring loom to both illuminated sun visors.... got the visors just missing the loom...

regards


Ploppy :D

Should have, do you know where they go?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy H on 18. Apr 2010 at 21:26
Does the golden nugget have the speaker loop-back plug behind the drivers side kick panel?

My car currently has the BOSE amplifier and if I can get a loop-back plug it will make the job of fitting my Blaupunkt headunit a lot neater :y

This is a picture of the BOSE plug currently fitted to my car.


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 18. Apr 2010 at 21:36

Andy H wrote on 18. Apr 2010 at 21:26:
Does the golden nugget have the speaker loop-back plug behind the drivers side kick panel?

My car currently has the BOSE amplifier and if I can get a loop-back plug it will make the job of fitting my Blaupunkt headunit a lot neater :y

This is a picture of the BOSE plug currently fitted to my car.


No, it has the bose one (already sold).
Bet Darth Loo-Knee has one though  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 18. Apr 2010 at 21:40

TheBoy wrote on 18. Apr 2010 at 21:36:

Andy H wrote on 18. Apr 2010 at 21:26:
Does the golden nugget have the speaker loop-back plug behind the drivers side kick panel?

My car currently has the BOSE amplifier and if I can get a loop-back plug it will make the job of fitting my Blaupunkt headunit a lot neater :y

This is a picture of the BOSE plug currently fitted to my car.


No, it has the bose one (already sold).
Bet Darth Loo-Knee has one though  :y


Will also need to change the speakers as well.... I'm guessing the parcel shelf / boot sub (depending on saloon / estate) will also be disabled.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy H on 18. Apr 2010 at 22:32

VXL V6 wrote on 18. Apr 2010 at 21:40:

TheBoy wrote on 18. Apr 2010 at 21:36:

Andy H wrote on 18. Apr 2010 at 21:26:
Does the golden nugget have the speaker loop-back plug behind the drivers side kick panel?

My car currently has the BOSE amplifier and if I can get a loop-back plug it will make the job of fitting my Blaupunkt headunit a lot neater :y

This is a picture of the BOSE plug currently fitted to my car.


No, it has the bose one (already sold).
Bet Darth Loo-Knee has one though  :y


Will also need to change the speakers as well.... I'm guessing the parcel shelf / boot sub (depending on saloon / estate) will also be disabled.

I already have some 4 Ohm speakers, am kicking myself because I could have had the plug from the same car if I had known that I needed it at the time. :(

Not fussed about losing the parcel shelf speakers, I want to recover the boot space  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Elsheepo on 18. Apr 2010 at 22:56
Being an Elite, are the seat electric?  I'm looking for a drivers seat 'switch pack' i.e. the panel with the switches on to drive the electrics motors...

Managed to pick up a leather Elite interior but the drivers seat has the switches missing so at the minute relying on using a battery and long lead to manually move the seat - far from ideal!

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 08:15

Elsheepo wrote on 18. Apr 2010 at 22:56:
Being an Elite, are the seat electric?  I'm looking for a drivers seat 'switch pack' i.e. the panel with the switches on to drive the electrics motors...

Managed to pick up a leather Elite interior but the drivers seat has the switches missing so at the minute relying on using a battery and long lead to manually move the seat - far from ideal!

I am selling the seats complete I'm afraid.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by cem on 19. Apr 2010 at 09:30
some second hand part prices for facelift miggy from my city
(shame its too far from you)

doors   over 500£ each (without the windows , without inner equipment only bare metal)
headlights minimum 100 £ each
bonnet 400-500£
chairs (a real fortune)  1000-1200£  (wont be sold seperately)

and the car is worth minimum 7000£ in non working state  :'(


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 09:55

cem wrote on 19. Apr 2010 at 09:30:
some second hand part prices for facelift miggy from my city
(shame its too far from you)

doors   over 500£ each (without the windows , without inner equipment only bare metal)
headlights minimum 100 £ each
bonnet 400-500£
chairs (a real fortune)  1000-1200£  (wont be sold seperately)

and the car is worth minimum 7000£ in non working state  :'(

Blimey :o :o

Worth getting it tranported over :o :o

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy B on 19. Apr 2010 at 09:58

TheBoy wrote on 19. Apr 2010 at 09:55:
....
Worth getting it tranported over :o :o


Almost worth pushing it over for those prices!  ;D ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Entwood on 19. Apr 2010 at 10:00
Those silly little oval covers  that go on the rear bumper screws ...  can only be seen when the boot is open ..   x 2 ???

Those even sillier bits of plastic that hold the scuttle to the windscreen, underneath the rubber strip  ... x4 ???

Pretty please ???

;) ;) ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy B on 19. Apr 2010 at 10:02

Entwood wrote on 19. Apr 2010 at 10:00:
....
Those even sillier bits of plastic that hold the scuttle to the windscreen, underneath the rubber strip  ... x4 ???
.....


My local dealer seemed to struggle trying to get these 1/2 turn fasteners. I gave up in the end & went to another who had some on the shelf  :-?  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Gaffers on 19. Apr 2010 at 10:08
is the nsf wing available as well as the offside doors?

No hurry  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 10:19

Entwood wrote on 19. Apr 2010 at 10:00:
Those silly little oval covers  that go on the rear bumper screws ...  can only be seen when the boot is open ..   x 2 ???

Those even sillier bits of plastic that hold the scuttle to the windscreen, underneath the rubber strip  ... x4 ???

Pretty please ???

;) ;) ;)

not noticed the covers on the facelift bumper, will check.

scuttle clips, no chance. They're gonna be mine, all mine  *cackle*

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 10:22

Guffer wrote on 19. Apr 2010 at 10:08:
is the nsf wing available as well as the offside doors?

No hurry  :y

NSF wing is (as far as I can see) rust free and ding free. couple of light stonechips around front edge.

OSF door would need to check, don't recall anything untoward about it.

OSR door. Nah. Rust at the wheelarch corner.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Mr Skruntie on 19. Apr 2010 at 10:43

Andy B wrote on 19. Apr 2010 at 09:58:

TheBoy wrote on 19. Apr 2010 at 09:55:
....
Worth getting it tranported over :o :o


Almost worth pushing it over for those prices!  ;D ;D


Just googles it, 2360 miles from Rotherham to cems, might be pushing it a long time.   ::)

Only 2268 from Jamies to cams, and I dont think jamie will help push it.   ;D ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by cem on 19. Apr 2010 at 11:53

TheBoy wrote on 19. Apr 2010 at 09:55:

cem wrote on 19. Apr 2010 at 09:30:
some second hand part prices for facelift miggy from my city
(shame its too far from you)

doors   over 500£ each (without the windows , without inner equipment only bare metal)
headlights minimum 100 £ each
bonnet 400-500£
chairs (a real fortune)  1000-1200£  (wont be sold seperately)

and the car is worth minimum 7000£ in non working state  :'(

Blimey :o :o

Worth getting it tranported over :o :o


yep.. if there was nothing named as borders  :-/

good luck with the sale :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by cem on 19. Apr 2010 at 11:58

Mr Skrunts wrote on 19. Apr 2010 at 10:43:

Andy B wrote on 19. Apr 2010 at 09:58:

TheBoy wrote on 19. Apr 2010 at 09:55:
....
Worth getting it tranported over :o :o


Almost worth pushing it over for those prices!  ;D ;D


Just googles it, 2360 miles from Rotherham to cems, might be pushing it a long time.   ::)

Only 2268 from Jamies to cams, and I dont think jamie will help push it.   ;D ;D


believe me , if the borders were not a problem,

I would come with a bunch of mechanic  friends and make a group buy  ;D ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Elite Pete on 19. Apr 2010 at 12:07
Whats the driverside front wing like Jaime?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 13:04

Elite Pete wrote on 19. Apr 2010 at 12:07:
Whats the driverside front wing like Jaime?

Stonechips in paintwork, but otherwise dent and rust free (as far as I can see)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by henry on 19. Apr 2010 at 14:43
any headlamp washers available ?,I am after the o/s

thanks

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Elsheepo on 19. Apr 2010 at 15:37

TheBoy wrote on 19. Apr 2010 at 08:15:

Elsheepo wrote on 18. Apr 2010 at 22:56:
Being an Elite, are the seat electric?  I'm looking for a drivers seat 'switch pack' i.e. the panel with the switches on to drive the electrics motors...

Managed to pick up a leather Elite interior but the drivers seat has the switches missing so at the minute relying on using a battery and long lead to manually move the seat - far from ideal!

I am selling the seats complete I'm afraid.


No worries, as is often the case!  Thanks anyway.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lazydocker on 19. Apr 2010 at 19:55
Is the Bose going complete then?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 20:37

Lazydocker wrote on 19. Apr 2010 at 19:55:
Is the Bose going complete then?

Yup, and sold.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by omegaman2 on 19. Apr 2010 at 20:53
what about a passenger door mirror
the garage welder ripped mine off :(

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Welung666 on 19. Apr 2010 at 21:06

Elite Pete wrote on 19. Apr 2010 at 12:07:
Whats the driverside front wing like Jaime?


[ HIJACK ] I've got a pristine OS wing in Z489  :y[ /HIJACK ]

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 21:31

Welung666 wrote on 19. Apr 2010 at 21:06:

Elite Pete wrote on 19. Apr 2010 at 12:07:
Whats the driverside front wing like Jaime?


[ HIJACK ] I've got a pristine OS wing in Z489  :y[ /HIJACK ]

I'd go for that EP :y - mine has a small scratch on wheelarch.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Welung666 on 19. Apr 2010 at 21:41

TheBoy wrote on 19. Apr 2010 at 21:31:

Welung666 wrote on 19. Apr 2010 at 21:06:

Elite Pete wrote on 19. Apr 2010 at 12:07:
Whats the driverside front wing like Jaime?


[ HIJACK ] I've got a pristine OS wing in Z489  :y[ /HIJACK ]

I'd go for that EP :y - mine has a small scratch on wheelarch.


WOOHOO I got away with a hijack :P I'll post a pic in the test area tomorrow Pete :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. Apr 2010 at 22:10

Ploppy wrote on 18. Apr 2010 at 17:09:
Hi,

have you got the wiring loom to both illuminated sun visors.... got the visors just missing the loom...

regards


Ploppy :D

short bit from visors to sunroof panel?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 20. Apr 2010 at 13:05
Yes,,,,

should be a split type lead from both sun visors to one lead in roof of car?

Regards

Ploppy :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 20. Apr 2010 at 18:17

Ploppy wrote on 20. Apr 2010 at 13:05:
Yes,,,,

should be a split type lead from both sun visors to one lead in roof of car?

Regards

Ploppy :y

Yes, the bit of loom it joins to is in the sunroof panel (or middle/front of roof if no sunroof).  The original route will be challeging, as its runs under headling, then up into roof construction, which will be difficult for you without removing headlining.

Reckon you'll be better to tuck up into headlining along windscreen, and use a bit of stiffwire to get into the visor.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 20. Apr 2010 at 23:15
Hi,

sure , Im happy to fit the original part, so if you do want to sell that loom Im happy to buy it off you

Regards

Ploppy :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 21. Apr 2010 at 21:29
Sorry for delay on bits, been a slight delay as I've done my back again :(

Hope to get back on it at the weekend :(

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Andy B on 21. Apr 2010 at 21:31

TheBoy wrote on 21. Apr 2010 at 21:29:
  .....
Hope to get back on it at the weekend :(


Back on your back?  :-/  ;)  ;)  :y  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Bixy1 on 22. Apr 2010 at 10:45
Still have a drivers door mirror by any chance? I only need the glass but I'll buy the lot if necessary.
Cheers.  :-?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 22. Apr 2010 at 19:38

Bixy1 wrote on 22. Apr 2010 at 10:45:
Still have a drivers door mirror by any chance? I only need the glass but I'll buy the lot if necessary.
Cheers.  :-?

i think its spoken for

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lazydocker on 23. Apr 2010 at 13:12

TheBoy wrote on 21. Apr 2010 at 21:29:
Sorry for delay on bits, been a slight delay as I've done my back again :(

Hope to get back on it at the weekend :(


What's the matter... It's only pain, it'll go away ::) ::)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 23. Apr 2010 at 14:18

Lazydocker wrote on 23. Apr 2010 at 13:12:

TheBoy wrote on 21. Apr 2010 at 21:29:
Sorry for delay on bits, been a slight delay as I've done my back again :(

Hope to get back on it at the weekend :(


What's the matter... It's only pain, it'll go away ::) ::)

Got a double whammy - my normal lower back problems, compounded by the lightest of grazes on my shoulder blade that I keep digging grit from tunnie's driveway out of that is giving a surprising amount of sharp pains for such a small scratch.

But, you're right, its only pain, and a bit of pain never hurt anyone :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Kevin Wood on 23. Apr 2010 at 16:24
Has it got a working rear door CL motor?

Also, a trivial bit - the plastic hinge pins for the fuse box / diag connector cover.

A Lambda sensor plug and socket would be handy too, in case we have to crack out the wideband Lambda sensor to do some LPG debugging.

Kevin

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 23. Apr 2010 at 17:07

Kevin Wood wrote on 23. Apr 2010 at 16:24:
Has it got a working rear door CL motor?

Also, a trivial bit - the plastic hinge pins for the fuse box / diag connector cover.

A Lambda sensor plug and socket would be handy too, in case we have to crack out the wideband Lambda sensor to do some LPG debugging.

Kevin

pm sent

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 24. Apr 2010 at 20:28
Interior pretty much stripped out now, so anything anybody may want from interior, speak now ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Nickbat on 24. Apr 2010 at 23:22
I need a scuttle panel (I think that's the right description), plus any spare fixings you may have. Mine's cracked as you can see in the pic.



Cheers

Nick :y :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 25. Apr 2010 at 09:14
Nickbat - let me check the condition, I remember thinking it was better than the one on my MV6, but doubt its perfect (they rarely are)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 25. Apr 2010 at 19:35
Facelift ones have the widscreen washers on  ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 25. Apr 2010 at 19:46
Nickbat - I'll get a piccy up tomorrow, its in pretty good nick.  VXL V6 - it is facelift, but will obviously fit prefacelift ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 25. Apr 2010 at 19:55
You could have four washers!  ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 25. Apr 2010 at 20:06

VXL V6 wrote on 25. Apr 2010 at 19:55:
You could have four washers!  ;D

And still have a dirty screen ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Welung666 on 25. Apr 2010 at 20:28

TheBoy wrote on 25. Apr 2010 at 20:06:

VXL V6 wrote on 25. Apr 2010 at 19:55:
You could have four washers!  ;D

And still have a dirty screen ;D


I do on both counts ;D ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mr ICE man on 25. Apr 2010 at 21:44
How are front and rear pads and disks?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 25. Apr 2010 at 21:47

mr ICE man wrote on 25. Apr 2010 at 21:44:
How are front and rear pads and disks?

poor.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mr ICE man on 25. Apr 2010 at 21:49
Ok no prob!have bought an elite and it's been sitting for a while and all pads and disk are rusted.but thanks!

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lazydocker on 25. Apr 2010 at 22:21

TheBoy wrote on 25. Apr 2010 at 21:47:

mr ICE man wrote on 25. Apr 2010 at 21:44:
How are front and rear pads and disks?

poor.


Cooked is probably a better description ::) ::) ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Nickbat on 25. Apr 2010 at 23:41

TheBoy wrote on 25. Apr 2010 at 19:46:
Nickbat - I'll get a piccy up tomorrow, its in pretty good nick.  VXL V6 - it is facelift, but will obviously fit prefacelift ;)


I look forward to that. I've got a facelift, BTW!  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by jonny2112 on 26. Apr 2010 at 12:26
As a matter of interest, would the abs sensors fit a pre facelift?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by jonny2112 on 26. Apr 2010 at 12:27
As a matter of interest, would the abs sensors fit a pre facelift?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 26. Apr 2010 at 12:51

jonny2112 wrote on 26. Apr 2010 at 12:27:
As a matter of interest, would the abs sensors fit a pre facelift?

Don't know, sorry

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 26. Apr 2010 at 14:40

(HiRes - http://theboy.omegaowners.com/oofpics/Golden_Nugget_Parts/HiRes/scuttle1.JPG )


(HiRes - http://theboy.omegaowners.com/oofpics/Golden_Nugget_Parts/HiRes/scuttle2.JPG )


(HiRes - http://theboy.omegaowners.com/oofpics/Golden_Nugget_Parts/HiRes/scuttle3.JPG )


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Arrolman on 26. Apr 2010 at 15:55
Hi,

Do you have the bit of rubber that sits between the wiper spindle and the scuttle on the passenger side? The bit that stops water getting in by the wiper?

Cheers,
Iain

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 26. Apr 2010 at 16:19

Arrolman wrote on 26. Apr 2010 at 15:55:
Hi,

Do you have the bit of rubber that sits between the wiper spindle and the scuttle on the passenger side? The bit that stops water getting in by the wiper?

Cheers,
Iain

LOL - look in that pic above, looks like its wedged in scuttle bit, and slightly mangled ;D.

So, err, I'm guessing you be better off looking elsewhere ;D.  Good luck with your search, sure many of the breakers have one :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by PP Silver DTI on 26. Apr 2010 at 20:59
av u got the elite wheels?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 26. Apr 2010 at 21:02

PP Silver DTI wrote on 26. Apr 2010 at 20:59:
av u got the elite wheels?

Yes

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Nickbat on 26. Apr 2010 at 21:30
OK, I'll have that scuttle. It'll clean up nicely. :y :y :y :y

We can arrange post/payment whenever you like. I'm in no real hurry.

Cheers

Nick

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Ploppy on 26. Apr 2010 at 23:07
Hi TB

PM sent

Ploppy :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Manxie on 27. Apr 2010 at 14:59
Hi there, still got ignition barrel/lock set? And how much please?  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 28. Apr 2010 at 16:04
What is the boot carpet like, is it any good ? a mate has spilt diesel in his boot and is in need of the boot floor piece and the piece that goes up the nearside and covers the spare wheel. Thats what he discribes it as, i have no idea what he means as mine is an estate 

 [smiley=dankk2.gif]

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by tunnie on 28. Apr 2010 at 17:13

Nickbat wrote on 26. Apr 2010 at 21:30:
OK, I'll have that scuttle. It'll clean up nicely. :y :y :y :y

We can arrange post/payment whenever you like. I'm in no real hurry.

Cheers

Nick


I can prob chuck it in the boot, and bring it down to Heathrow area if thats any help?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 28. Apr 2010 at 17:26
I'm in Didcot and my mate is in Didcot during the week but travels to Preston and back at the weekends. He goes home early on Friday morning and returns to Didcot on Sunday afternoon/ early evening so may be able to collect on Sunday on his way back down to work. Or failing that, one of our drivers lives in Brackley so he may even be able to collect.   :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 29. Apr 2010 at 19:21

mrjimbo wrote on 28. Apr 2010 at 16:04:
What is the boot carpet like, is it any good ? a mate has spilt diesel in his boot and is in need of the boot floor piece and the piece that goes up the nearside and covers the spare wheel. Thats what he discribes it as, i have no idea what he means as mine is an estate 

 [smiley=dankk2.gif]

carpet is good, spare wheel thing has been left in rain  :-[.  Spare wheel cover, the holes that the plastic studs go through have split slightly, so occasionally pop through. Probably easily glued.

£10 collected

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 29. Apr 2010 at 19:24

Nickbat wrote on 26. Apr 2010 at 21:30:
OK, I'll have that scuttle. It'll clean up nicely. :y :y :y :y

We can arrange post/payment whenever you like. I'm in no real hurry.

Cheers

Nick

Was looking at £25 collected, else I'll put on my MV6.  Postage will be steep due to size :(

I can get it as far as Luton for free, but not much further  :'(

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by johncol on 29. Apr 2010 at 20:14
Would the door locks be the same as prefacelift, looking for a driver side door lock, solenoid is fine on it but the mechanism is in bits.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 29. Apr 2010 at 20:16

johncol wrote on 29. Apr 2010 at 20:14:
Would the door locks be the same as prefacelift, looking for a driver side door lock, solenoid is fine on it but the mechanism is in bits.

not sure to be honest  :-/

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by johncol on 29. Apr 2010 at 20:27

TheBoy wrote on 29. Apr 2010 at 20:16:

johncol wrote on 29. Apr 2010 at 20:14:
Would the door locks be the same as prefacelift, looking for a driver side door lock, solenoid is fine on it but the mechanism is in bits.

not sure to be honest  :-/


No bother - theres one on Fleabay here that I think might do, bit pricey mind

http://cgi.ebay.co.uk/VAUXHALL-OPEL-OMEGA-FRONT-DOOR-LOCK-CATCH-MECHANISM-RH-/380216318333?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5886a8997d

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mantahatch on 29. Apr 2010 at 21:50
Just an add on to bootlid and spoiler. Is the centre arm rest bit with the heated rear seat switches in available ?

Mike

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 29. Apr 2010 at 21:51

Mantahatch wrote on 29. Apr 2010 at 21:50:
Just an add on to bootlid and spoiler. Is the centre arm rest bit with the heated rear seat switches in available ?

Mike

switches sold with seats

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 30. Apr 2010 at 06:00

TheBoy wrote on 29. Apr 2010 at 19:21:

mrjimbo wrote on 28. Apr 2010 at 16:04:
What is the boot carpet like, is it any good ? a mate has spilt diesel in his boot and is in need of the boot floor piece and the piece that goes up the nearside and covers the spare wheel. Thats what he discribes it as, i have no idea what he means as mine is an estate 

 [smiley=dankk2.gif]

carpet is good, spare wheel thing has been left in rain  :-[.  Spare wheel cover, the holes that the plastic studs go through have split slightly, so occasionally pop through. Probably easily glued.

£10 collected


OK Whens the best time to get it collected ? I have someone who lives in Brackley that can collect any afternoon and he will bring it into work for me just need address where to collect it from  :y

COD  or PayPal ?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 30. Apr 2010 at 09:06

mrjimbo wrote on 30. Apr 2010 at 06:00:

TheBoy wrote on 29. Apr 2010 at 19:21:

mrjimbo wrote on 28. Apr 2010 at 16:04:
What is the boot carpet like, is it any good ? a mate has spilt diesel in his boot and is in need of the boot floor piece and the piece that goes up the nearside and covers the spare wheel. Thats what he discribes it as, i have no idea what he means as mine is an estate 

 [smiley=dankk2.gif]

carpet is good, spare wheel thing has been left in rain  :-[.  Spare wheel cover, the holes that the plastic studs go through have split slightly, so occasionally pop through. Probably easily glued.

£10 collected


OK Whens the best time to get it collected ? I have someone who lives in Brackley that can collect any afternoon and he will bring it into work for me just need address where to collect it from  :y

COD  or PayPal ?

I am around this afternoon until about 5pm, if thats not too short notice.  I will be at Oxford meet tomorrow, if you fancied meeting a few members (see Meetings section)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Nickbat on 30. Apr 2010 at 09:10

TheBoy wrote on 29. Apr 2010 at 19:24:

Nickbat wrote on 26. Apr 2010 at 21:30:
OK, I'll have that scuttle. It'll clean up nicely. :y :y :y :y

We can arrange post/payment whenever you like. I'm in no real hurry.

Cheers

Nick

Was looking at £25 collected, else I'll put on my MV6.  Postage will be steep due to size :(

I can get it as far as Luton for free, but not much further  :'(


Put it on your MV6, Jaime. :y

Due to it's size, it's going to be a hassle, so I think I'll pull out of the deal if that's OK with you.

Sorry for any inconvenience.  :-[

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 30. Apr 2010 at 09:14

Nickbat wrote on 30. Apr 2010 at 09:10:

TheBoy wrote on 29. Apr 2010 at 19:24:
[quote author=73545E565F5C493D0 link=1271433353/104#104 date=1272313822]OK, I'll have that scuttle. It'll clean up nicely. :y :y :y :y

We can arrange post/payment whenever you like. I'm in no real hurry.

Cheers

Nick

Was looking at £25 collected, else I'll put on my MV6.  Postage will be steep due to size :(

I can get it as far as Luton for free, but not much further  :'(


Put it on your MV6, Jaime. :y

Due to it's size, it's going to be a hassle, so I think I'll pull out of the deal if that's OK with you.

Sorry for any inconvenience.  :-[/quote]
No worries, that was my original plan :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 30. Apr 2010 at 11:16

TheBoy wrote on 30. Apr 2010 at 09:06:

mrjimbo wrote on 30. Apr 2010 at 06:00:

TheBoy wrote on 29. Apr 2010 at 19:21:

mrjimbo wrote on 28. Apr 2010 at 16:04:
What is the boot carpet like, is it any good ? a mate has spilt diesel in his boot and is in need of the boot floor piece and the piece that goes up the nearside and covers the spare wheel. Thats what he discribes it as, i have no idea what he means as mine is an estate 

 [smiley=dankk2.gif]

carpet is good, spare wheel thing has been left in rain  :-[.  Spare wheel cover, the holes that the plastic studs go through have split slightly, so occasionally pop through. Probably easily glued.

£10 collected


OK Whens the best time to get it collected ? I have someone who lives in Brackley that can collect any afternoon and he will bring it into work for me just need address where to collect it from  :y

COD  or PayPal ?

I am around this afternoon until about 5pm, if thats not too short notice.  I will be at Oxford meet tomorrow, if you fancied meeting a few members (see Meetings section)


OK i'll see if i can get to the Oxford meet tomorrow, probably wont be able to get there till about 2.00pm though. If i can't i'll get it collected one day next week if that's OK. I'll let you know tomorrow morning for definate   :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 01. May 2010 at 04:30
See you at Oxford meet later on  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lincs Robert on 01. May 2010 at 12:02
PM sent Jamie

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by georgie on 01. May 2010 at 13:56
Is an ar35 available?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 02. May 2010 at 11:38

georgie wrote on 01. May 2010 at 13:56:
Is an ar35 available?

Sorry, its an ar25 I presume (2.5 engine).


If anyone wants it, £30 collected, and a hand to remove it ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lincs Robert on 02. May 2010 at 12:19
Have you got my PM(s) Jamie?

Thanks

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Miggster on 02. May 2010 at 13:44

TheBoy wrote on 29. Apr 2010 at 20:16:

johncol wrote on 29. Apr 2010 at 20:14:
Would the door locks be the same as prefacelift, looking for a driver side door lock, solenoid is fine on it but the mechanism is in bits.

not sure to be honest  :-/


yes all locks are the same on pre and facelift

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 02. May 2010 at 15:13
Do you still have the wiper linkage/motor assembly ? and does it have less play than the one on mine. Or can the bushes in the arms be replaced ?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 02. May 2010 at 19:59

mrjimbo wrote on 02. May 2010 at 15:13:
Do you still have the wiper linkage/motor assembly ? and does it have less play than the one on mine. Or can the bushes in the arms be replaced ?

I will check - don't recall it being problematic when I was using the car...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by standingtree on 02. May 2010 at 21:22
Ah - am I too late for the driver's door central locking solenoid? If not I'm in need of one, please!

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Budgie on 02. May 2010 at 22:19
Hi,

Can you help with parts I'm looking for? - see link below.

Thanks

http://www.omegaowners.com/forum/YaBB.pl?num=1272815974

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 03. May 2010 at 19:39

standingtree wrote on 02. May 2010 at 21:22:
Ah - am I too late for the driver's door central locking solenoid? If not I'm in need of one, please!

currently, not selling cdl motors in order to keep car secure.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 03. May 2010 at 19:40

Budgie wrote on 02. May 2010 at 22:19:
Hi,

Can you help with parts I'm looking for? - see link below.

Thanks

http://www.omegaowners.com/forum/YaBB.pl?num=1272815974

I shall check and see if I can work out what part you mean

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 04. May 2010 at 16:35

TheBoy wrote on 02. May 2010 at 19:59:

mrjimbo wrote on 02. May 2010 at 15:13:
Do you still have the wiper linkage/motor assembly ? and does it have less play than the one on mine. Or can the bushes in the arms be replaced ?

I will check - don't recall it being problematic when I was using the car...


If it's got less play than mine i'll have it. How much do you want for it ?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 04. May 2010 at 18:48

mrjimbo wrote on 04. May 2010 at 16:35:

TheBoy wrote on 02. May 2010 at 19:59:

mrjimbo wrote on 02. May 2010 at 15:13:
Do you still have the wiper linkage/motor assembly ? and does it have less play than the one on mine. Or can the bushes in the arms be replaced ?

I will check - don't recall it being problematic when I was using the car...


If it's got less play than mine i'll have it. How much do you want for it ?

If you are passing, yours for £20 collected. Still on the car currently, so you can check before removal...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mrjimbo on 05. May 2010 at 05:18

TheBoy wrote on 04. May 2010 at 18:48:

mrjimbo wrote on 04. May 2010 at 16:35:

TheBoy wrote on 02. May 2010 at 19:59:

mrjimbo wrote on 02. May 2010 at 15:13:
Do you still have the wiper linkage/motor assembly ? and does it have less play than the one on mine. Or can the bushes in the arms be replaced ?

I will check - don't recall it being problematic when I was using the car...


If it's got less play than mine i'll have it. How much do you want for it ?

If you are passing, yours for £20 collected. Still on the car currently, so you can check before removal...



OK   :y   I might be up that way on Friday or Saturday.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Budgie on 12. May 2010 at 21:19

Budgie wrote on 02. May 2010 at 22:19:
Hi,

Can you help with parts I'm looking for? - see link below.

Thanks

http://www.omegaowners.com/forum/YaBB.pl?num=1272815974



Any joy with these  :question

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by jjleonard on 12. May 2010 at 22:53
Are you selling the headlights? i'm after the passenger side, with adjuster motor? (I'm assuming they're xenons, as it's an elite....)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 13. May 2010 at 19:31

jjleonard wrote on 12. May 2010 at 22:53:
Are you selling the headlights? i'm after the passenger side, with adjuster motor? (I'm assuming they're xenons, as it's an elite....)

Already sold, sorry.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 13. May 2010 at 21:30
Odd request, fuel lines......

But i'm guessing that the tank has fuel in.......


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 13. May 2010 at 21:33

VXL V6 wrote on 13. May 2010 at 21:30:
Odd request, fuel lines......

But i'm guessing that the tank has fuel in.......

The tank is pretty empty - contents now in MV6, Kawasaki and lawnmower ;D

The metal pipes out of top of tank are passed their best.  No reason to suspect that the rest of fuel lines are not good though.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 13. May 2010 at 21:39

TheBoy wrote on 13. May 2010 at 21:33:

VXL V6 wrote on 13. May 2010 at 21:30:
Odd request, fuel lines......

But i'm guessing that the tank has fuel in.......

The tank is pretty empty - contents now in MV6, Kawasaki and lawnmower ;D

The metal pipes out of top of tank are passed their best.  No reason to suspect that the rest of fuel lines are not good though.


I will check which one it is and let you know tomorrow.  :y


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 14. May 2010 at 14:17

VXL V6 wrote on 13. May 2010 at 21:39:

TheBoy wrote on 13. May 2010 at 21:33:

VXL V6 wrote on 13. May 2010 at 21:30:
Odd request, fuel lines......

But i'm guessing that the tank has fuel in.......

The tank is pretty empty - contents now in MV6, Kawasaki and lawnmower ;D

The metal pipes out of top of tank are passed their best.  No reason to suspect that the rest of fuel lines are not good though.


I will check which one it is and let you know tomorrow.  :y


Hi TB

It's the pipe furthest from the outside edge of the car, the feed from the fuel filter to the injector rail, guessing it will need to pull back through the inner wing from the rail. Mine is damaged on the connector in the middle so needs the entire run..... 

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 14. May 2010 at 14:20

VXL V6 wrote on 14. May 2010 at 14:17:

VXL V6 wrote on 13. May 2010 at 21:39:

TheBoy wrote on 13. May 2010 at 21:33:

VXL V6 wrote on 13. May 2010 at 21:30:
Odd request, fuel lines......

But i'm guessing that the tank has fuel in.......

The tank is pretty empty - contents now in MV6, Kawasaki and lawnmower ;D

The metal pipes out of top of tank are passed their best.  No reason to suspect that the rest of fuel lines are not good though.


I will check which one it is and let you know tomorrow.  :y


Hi TB

It's the pipe furthest from the outside edge of the car, the feed from the fuel filter to the injector rail, guessing it will need to pull back through the inner wing from the rail. Mine is damaged on the connector in the middle so needs the entire run..... 

Yours for nought if you want to come and take it off ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by VXL V6 on 14. May 2010 at 14:36
Excellent  :)

When are you planning to dispose of the car? I've got some time off 26th onwards or could run up one evening.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by JamesV6Elite on 14. May 2010 at 14:43
I know you said non-engine parts only... guessing this is because of it's running issue?

If the 3.0 cams are available, how much do you want for them? Not much that can be wrong with them  :y

( I could collect them at the same time I badger you for a gearbox/climate update  :D )

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 14. May 2010 at 15:19

JamesV6CDX wrote on 14. May 2010 at 14:43:
I know you said non-engine parts only... guessing this is because of it's running issue?

If the 3.0 cams are available, how much do you want for them? Not much that can be wrong with them  :y

( I could collect them at the same time I badger you for a gearbox/climate update  :D )

No engine parts simply because I hadn't got around to stripping the engine, and my back was giving me an awful lot of grief.

3l cams are out of car now, sat in an oil bath.  Divider plate still on engine.

£100 collected, no offers, first to bring the cash to me and pick them up will be the owner of them ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Eric DUBLIN on 14. May 2010 at 21:19

TheBoy wrote on 16. Apr 2010 at 16:55:
All non engine parts available.

  Hows it goin TB!  im after; rear shocks and springs, and new front struts for my 2.5td. Any salvage from champagne  or  Any suggestions?
                Nice'1 :y
                              Eric.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 15. May 2010 at 09:41

Eric DUBLIN wrote on 14. May 2010 at 21:19:

TheBoy wrote on 16. Apr 2010 at 16:55:
All non engine parts available.

  Hows it goin TB!  im after; rear shocks and springs, and new front struts for my 2.5td. Any salvage from champagne  or  Any suggestions?
                Nice'1 :y
                              Eric.

The suspension on this one would have been changed if I didn't break it, as its passed its best.  Therefore I would suggest to look elsewhere, sorry.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by nmp on 15. May 2010 at 16:00
Do you have the airbox clips?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by JamesV6Elite on 16. May 2010 at 10:30
Is the DIS And leads believed to be working?

Appreciate new is the way to go - but if it's going cheap enough, I'll have 'em, to eliminate this damn elite issues.

Also, what sort of cost for the 2-4-6 cat?  ::)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 16. May 2010 at 12:42

JamesV6CDX wrote on 16. May 2010 at 10:30:
Is the DIS And leads believed to be working?

Appreciate new is the way to go - but if it's going cheap enough, I'll have 'em, to eliminate this damn elite issues.

Also, what sort of cost for the 2-4-6 cat?  ::)

I'm NOT going to sell DIS and leads, due to the issues.  I've proven spark, so reckon they are OK, but cannot, hand on my heart, say they are perfect.

I'm gonna keep them as spares in case mine fails anyway - my MV6 dumped 8l of coolant all over my dis at around 120mph, so suspect it will die at some point....

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 16. May 2010 at 12:45
I can get £60 for each cat, but you can have one for £30 if you come at take it off.

Tell you what, as I owe you a favour, buy the cams, you can have the cat for nought ;D ;D ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by markspark on 18. May 2010 at 23:54
hi would you have the horns from under/behind the front bumper

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 19. May 2010 at 12:42

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by markspark on 19. May 2010 at 16:09

TheBoy wrote on 19. May 2010 at 12:42:

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

that dont sound bad can you get cost of postage plz

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Will B on 20. May 2010 at 01:36
Hi TB
Is the front bumper still going? if so how much collected as I'm not far from you anyway  ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Broomies Mate on 20. May 2010 at 14:14
Hi TB.  Do you have the Power Steering Pressure Pipe.

Runs from the Power Steering Pump, (this part is flexi) then turns into a solid pipe, through to the front bumper, runs below the bumper iron, then back in the engine bay on the opposite chassis leg.....

Cheers, BM

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 20. May 2010 at 18:58

Will B wrote on 20. May 2010 at 01:36:
Hi TB
Is the front bumper still going? if so how much collected as I'm not far from you anyway  ;D

£10 collected (without foglights) - its scratched badly on one corner.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 20. May 2010 at 18:59

Broomies Mate wrote on 20. May 2010 at 14:14:
Hi TB.  Do you have the Power Steering Pressure Pipe.

Runs from the Power Steering Pump, (this part is flexi) then turns into a solid pipe, through to the front bumper, runs below the bumper iron, then back in the engine bay on the opposite chassis leg.....

Cheers, BM

I will have to look - if its long, postage could be an issue...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 20. May 2010 at 20:10
I am ready to start selling body panels from this car now.  I aim to dispose of this car in the next couple of weeks.

Doors, £25 each, except OSR, £15 as this has rust in bottom corner.  All with loom/glass/electric winders/CDL motors etc.

Bootlid with Elite spoiler, £75

Bonnet, £25

All collection only, for obvious reasons...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Broomies Mate on 20. May 2010 at 20:17

TheBoy wrote on 20. May 2010 at 18:59:

Broomies Mate wrote on 20. May 2010 at 14:14:
Hi TB.  Do you have the Power Steering Pressure Pipe.

Runs from the Power Steering Pump, (this part is flexi) then turns into a solid pipe, through to the front bumper, runs below the bumper iron, then back in the engine bay on the opposite chassis leg.....

Cheers, BM

I will have to look - if its long, postage could be an issue...


Cheers TB.  It's about 4ft in length, so I see where you are coming from.

I've just left my broken pipe with a Hydraulic Hose Specialist, so *hopefully* they can repair/replace the damaged section.  If not, I'll happily pay for the courier charges rather than wait for the shower of crap, Vauxhall, who will have to ship one from Germany at extortionate prices.

Cheers, BM

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 20. May 2010 at 22:07
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 20. May 2010 at 22:46

Boditza wrote on 20. May 2010 at 22:07:
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

What do you want from headlight washers - just nozzles, or pumps/relays/pipework etc

Not removed wiper motor - is linkage dettachable?

Sunroof button, just the knob - as the control bit is part of ecu/motor?

Self levelling sensors - yes

Shocks, no, sorry.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 21. May 2010 at 07:21

TheBoy wrote on 20. May 2010 at 22:46:

Boditza wrote on 20. May 2010 at 22:07:
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

What do you want from headlight washers - just nozzles, or pumps/relays/pipework etc

Not removed wiper motor - is linkage dettachable?

Sunroof button, just the knob - as the control bit is part of ecu/motor?

Self levelling sensors - yes

Shocks, no, sorry.


i need just the nozzles with the cover that mount on the spoiler
the linkage is detachable.. like i said i need the linkage betweeen the motor and the wiper arms.
i need the knob and the control bit because mine isn't working anymore :(
please make me a price for each of them . thank you

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 22. May 2010 at 17:52

markspark wrote on 19. May 2010 at 16:09:

TheBoy wrote on 19. May 2010 at 12:42:

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

that dont sound bad can you get cost of postage plz

Sorry for delay, just wanted to test it first (both horns work fine).

postage will be a fiver, so £15 delivered to UK


Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 22. May 2010 at 17:55

Boditza wrote on 21. May 2010 at 07:21:

TheBoy wrote on 20. May 2010 at 22:46:

Boditza wrote on 20. May 2010 at 22:07:
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

What do you want from headlight washers - just nozzles, or pumps/relays/pipework etc

Not removed wiper motor - is linkage dettachable?

Sunroof button, just the knob - as the control bit is part of ecu/motor?

Self levelling sensors - yes

Shocks, no, sorry.


i need just the nozzles with the cover that mount on the spoiler
the linkage is detachable.. like i said i need the linkage betweeen the motor and the wiper arms.
i need the knob and the control bit because mine isn't working anymore :(
please make me a price for each of them . thank you

The headlight washers have now sold on ebay, so no longer available.

Which part of the linkage is it...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 22. May 2010 at 20:04

Broomies Mate wrote on 20. May 2010 at 14:14:
Hi TB.  Do you have the Power Steering Pressure Pipe.

Runs from the Power Steering Pump, (this part is flexi) then turns into a solid pipe, through to the front bumper, runs below the bumper iron, then back in the engine bay on the opposite chassis leg.....

Cheers, BM

Checked it, whilst not leaking, heavy corrosion, so would suggest you look elsewhere. Sorry.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by GardO71 on 22. May 2010 at 21:18

TheBoy wrote on 20. May 2010 at 20:10:
I am ready to start selling body panels from this car now.  I aim to dispose of this car in the next couple of weeks.

Doors, £25 each, except OSR, £15 as this has rust in bottom corner.  All with loom/glass/electric winders/CDL motors etc.

Bootlid with Elite spoiler, £75

Bonnet, £25

All collection only, for obvious reasons...



Do you still have the bonnet?

what about n/s/f wing?


i am in need of a front bumper too, it's a Facelift CDX on an 02 plate

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 22. May 2010 at 22:15

GardO71 wrote on 22. May 2010 at 21:18:

TheBoy wrote on 20. May 2010 at 20:10:
I am ready to start selling body panels from this car now.  I aim to dispose of this car in the next couple of weeks.

Doors, £25 each, except OSR, £15 as this has rust in bottom corner.  All with loom/glass/electric winders/CDL motors etc.

Bootlid with Elite spoiler, £75

Bonnet, £25

All collection only, for obvious reasons...



Do you still have the bonnet?

what about n/s/f wing?


i am in need of a front bumper too, it's a Facelift CDX on an 02 plate

Bonnet - Yes
NSF wing - Yes, no idea how it comes off ;D
Front Bumper - No, went this morning

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Kai on 23. May 2010 at 01:21
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 23. May 2010 at 07:59

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mantahatch on 23. May 2010 at 08:59

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, pleasedon't forget my previous enquiry.

Thanks

Mike

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by markspark on 23. May 2010 at 15:43

TheBoy wrote on 22. May 2010 at 17:52:

markspark wrote on 19. May 2010 at 16:09:

TheBoy wrote on 19. May 2010 at 12:42:

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

that dont sound bad can you get cost of postage plz

Sorry for delay, just wanted to test it first (both horns work fine).

postage will be a fiver, so £15 delivered to UK


hi thanks for the reply what method of payment is best for you
also if your not keeping the loom could you please send them with the connections and a little amount of wire on as someone has cut the plugs off on my car
cheers
mark

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Kaiteriteri on 23. May 2010 at 17:09
Hi, do you have the black short stubby aerial available?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Welung666 on 23. May 2010 at 17:26

Mantahatch wrote on 23. May 2010 at 08:59:

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, please don't forget my previous enquiry.

Thanks

Mike


I've got a saloon bootlid in Z489 but it doesn't have a spoiler. ;) :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 23. May 2010 at 18:58

TheBoy wrote on 22. May 2010 at 17:55:

Boditza wrote on 21. May 2010 at 07:21:

TheBoy wrote on 20. May 2010 at 22:46:

Boditza wrote on 20. May 2010 at 22:07:
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

What do you want from headlight washers - just nozzles, or pumps/relays/pipework etc

Not removed wiper motor - is linkage dettachable?

Sunroof button, just the knob - as the control bit is part of ecu/motor?

Self levelling sensors - yes

Shocks, no, sorry.


i need just the nozzles with the cover that mount on the spoiler
the linkage is detachable.. like i said i need the linkage betweeen the motor and the wiper arms.
i need the knob and the control bit because mine isn't working anymore :(
please make me a price for each of them . thank you

The headlight washers have now sold on ebay, so no longer available.

Which part of the linkage is it...


all of it.. keep the motor and i will have it all. please tell me how much are all the pieces i requested without the nozzles.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mantahatch on 23. May 2010 at 21:21

Welung666 wrote on 23. May 2010 at 17:26:

Mantahatch wrote on 23. May 2010 at 08:59:

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, please don't forget my previous enquiry.

Thanks

Mike


I've got a saloon bootlid in Z489 but it doesn't have a spoiler. ;) :y



That's good, I want the spoiler and Kai wants a bootlid. Hopefully all 4 of us happy  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Welung666 on 23. May 2010 at 21:27

Mantahatch wrote on 23. May 2010 at 21:21:

Welung666 wrote on 23. May 2010 at 17:26:

Mantahatch wrote on 23. May 2010 at 08:59:

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, please don't forget my previous enquiry.

Thanks

Mike


I've got a saloon bootlid in Z489 but it doesn't have a spoiler. ;) :y



That's good, I want the spoiler and Kai wants a bootlid. Hopefully all 4 of us happy  :y


That was my thinking as you're after the lid with spolier and I have a lid without, everyone is happy ;)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Broomies Mate on 23. May 2010 at 23:14

TheBoy wrote on 22. May 2010 at 20:04:

Broomies Mate wrote on 20. May 2010 at 14:14:
Hi TB.  Do you have the Power Steering Pressure Pipe.

Runs from the Power Steering Pump, (this part is flexi) then turns into a solid pipe, through to the front bumper, runs below the bumper iron, then back in the engine bay on the opposite chassis leg.....

Cheers, BM

Checked it, whilst not leaking, heavy corrosion, so would suggest you look elsewhere. Sorry.


Many thanks for your honesty TB  :y

As it happens, the damaged section of pipe was replaced (Thanks to advice from 'Sixstring') and it's back on the road (ish) lol

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 24. May 2010 at 08:34

Mantahatch wrote on 23. May 2010 at 08:59:

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, pleasedon't forget my previous enquiry.

Thanks

Mike


Now the parts are available...

TheBoy wrote on 20. May 2010 at 20:10:
I am ready to start selling body panels from this car now.  I aim to dispose of this car in the next couple of weeks.

Doors, £25 each, except OSR, £15 as this has rust in bottom corner.  All with loom/glass/electric winders/CDL motors etc.

Bootlid with Elite spoiler, £75

Bonnet, £25

All collection only, for obvious reasons...


...the first with the money gets it :y

(Sorry, too many people want to reserve bits, doing so became unmanageable)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 24. May 2010 at 08:37

markspark wrote on 23. May 2010 at 15:43:

TheBoy wrote on 22. May 2010 at 17:52:

markspark wrote on 19. May 2010 at 16:09:

TheBoy wrote on 19. May 2010 at 12:42:

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

that dont sound bad can you get cost of postage plz

Sorry for delay, just wanted to test it first (both horns work fine).

postage will be a fiver, so £15 delivered to UK


hi thanks for the reply what method of payment is best for you
also if your not keeping the loom could you please send them with the connections and a little amount of wire on as someone has cut the plugs off on my car
cheers
mark

Paypal/cheque/bank xfer - whatever suits you, let me know and I'll PM you the details :y

I've already cut one of the connectors off to test (6" or so), presumably you need both connectors?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 24. May 2010 at 08:38

Kaiteriteri wrote on 23. May 2010 at 17:09:
Hi, do you have the black short stubby aerial available?

The cellular (only) one on the saloon roof? This is not a GPS one.  If still interested, £5 inc P&P to UK (not including any wiring)

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mantahatch on 24. May 2010 at 08:48

TheBoy wrote on 24. May 2010 at 08:34:

Mantahatch wrote on 23. May 2010 at 08:59:

TheBoy wrote on 23. May 2010 at 07:59:

Kai wrote on 23. May 2010 at 01:21:
TB is the car the same colour as mine? if so i may want the boot if still there  :y :y

Z489 (Champayne) - check your paint code (on B pillar), as there may be more than 1 shade of that colour



Dear TB, pleasedon't forget my previous enquiry.

Thanks

Mike


Now the parts are available...

TheBoy wrote on 20. May 2010 at 20:10:
I am ready to start selling body panels from this car now.  I aim to dispose of this car in the next couple of weeks.

Doors, £25 each, except OSR, £15 as this has rust in bottom corner.  All with loom/glass/electric winders/CDL motors etc.

Bootlid with Elite spoiler, £75

Bonnet, £25

All collection only, for obvious reasons...


...the first with the money gets it :y

(Sorry, too many people want to reserve bits, doing so became unmanageable)



Will def have bootlid/spoiler please. When is a good day to collect ?
Dad is taking mum's car to WIM soon so if possible could tie the two together.
Will he have to remove the bootlid ?

Thanks

Mike

Will bring cash with him.

Can come Wednesday or Friday this week, or any day next week.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Impact Pete on 24. May 2010 at 10:31
could do with drivers side lock solenoid, mine seems to of stopped working..

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 24. May 2010 at 10:40

Impact Pete wrote on 24. May 2010 at 10:31:
could do with drivers side lock solenoid, mine seems to of stopped working..

If the doors sell, I wanted to sell them 'whole', just minus the doorcards and speakers.  If they don't sell, I will whip out the CDL motors and list them seperately....

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by markspark on 24. May 2010 at 22:57

TheBoy wrote on 24. May 2010 at 08:37:

markspark wrote on 23. May 2010 at 15:43:

TheBoy wrote on 22. May 2010 at 17:52:

markspark wrote on 19. May 2010 at 16:09:

TheBoy wrote on 19. May 2010 at 12:42:

markspark wrote on 18. May 2010 at 23:54:
hi would you have the horns from under/behind the front bumper

Yes. Tenner + P&P (would need to weigh to guess postage)

that dont sound bad can you get cost of postage plz

Sorry for delay, just wanted to test it first (both horns work fine).

postage will be a fiver, so £15 delivered to UK


hi thanks for the reply what method of payment is best for you
also if your not keeping the loom could you please send them with the connections and a little amount of wire on as someone has cut the plugs off on my car
cheers
mark

Paypal/cheque/bank xfer - whatever suits you, let me know and I'll PM you the details :y

I've already cut one of the connectors off to test (6" or so), presumably you need both connectors?

i will do paypal if thats ok pm me your details
also would like both plugs if thats ok with you
thanks
mark

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by mantahatch on 25. May 2010 at 08:52
You have PM  :y

Dear Jaime
Mums car is booked into WIM for 11.00am on Friday morning. Tony reckons it will take about 1.5 hours to do and then mum and dad will be on there way to you. I would estimat getting to you about 14.00.

Oh yes the boot lid does fit in the boot of a saloon, it has to be upside down if that makes sense.



Thanks Mike

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 25. May 2010 at 19:09
you didn't answered me...

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 28. May 2010 at 08:16

Boditza wrote on 25. May 2010 at 19:09:
you didn't answered me...

Sorry, not got all the pieces you mentioned off the car yet - I've been busy with other problems this week  :-[

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 28. May 2010 at 21:36
i just wanted the prices you ask  for them so i can tell you to dismantle them or not... i din't asked you to ship them :(

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 28. May 2010 at 22:05

Boditza wrote on 28. May 2010 at 21:36:
i just wanted the prices you ask  for them so i can tell you to dismantle them or not... i din't asked you to ship them :(

OK, I like to remove them and check they aren't broken before confirming I can supply them (in case I break a part on removal).

I will get you prices if you like, but can't confirm I can supply them until they are removed.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 28. May 2010 at 22:09

Boditza wrote on 20. May 2010 at 22:07:
i'm interested in headlamp washers, windscreen wipers linkage from electric motor to windscreen arm, electric sunroof button, self leveling suspension sensor, self leveling headlight sensor and a good adjustable shock absorber. if you have any of these please pm me with a price for them.

Headlamp Washers - Sold
Wiper mech - £15
Sunroof ECU - £15
Self Levelling Suspension ECU/Sensor - £15
Self Levelling Headlight sensors - £25 each
Shocks - Not selling

All excluding P&P

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 29. May 2010 at 07:54
Thank you for your quick answer. i will get back to you, but i have a question: headlight sensor are more than one?? i know i have one on the front wishbone but the other one where is it?

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by hotel21 on 29. May 2010 at 11:08

Boditza wrote on 29. May 2010 at 07:54:
Thank you for your quick answer. i will get back to you, but i have a question: headlight sensor are more than one?? i know i have one on the front wishbone but the other one where is it?


rear nearside (left) suspension arm, same side as the front one...  Sensor on the rear opposite side is for the (if fitted) air suspension.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Boditza on 29. May 2010 at 13:55
thank you for the answer.. i will elevate the car and see if there is something there but i don't remember seing anything there except for the suspension sensor wich is on the oposite side. if you have some pics with them please send them to my mail boditza12345atyahoo.com. hope i am not intruding with all these questions.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Risky Duckfeet on 30. May 2010 at 11:34
Hi TB,
Are the front wishbones in reasonable condition? And will they fit pre-facelift MV6?
If it means that you can't move the car without them fitted you can replace them with the ones that I have on at the minute.
Let me know and I can pop over to Brackley to collect them.
Cheers mate.
Kieren

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 30. May 2010 at 16:47

Risky Duckfeet wrote on 30. May 2010 at 11:34:
Hi TB,
Are the front wishbones in reasonable condition? And will they fit pre-facelift MV6?
If it means that you can't move the car without them fitted you can replace them with the ones that I have on at the minute.
Let me know and I can pop over to Brackley to collect them.
Cheers mate.
Kieren

Hmmm, not sure I would be fitting 2nd hand wishbones to be honest, probably false economy, seeing as you need alignment checks afterwards.

Whilst when I last checked (before trip to Wales in late March) they were fine, its not something I would do.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Risky Duckfeet on 30. May 2010 at 20:02
Just need them to get me by for a bit while I save for the new ones. £225 a piece from vauxhall and work has been slow recently. Car is not usable at the minute and haven't got the money for the new ones so I just need a pair to get me mobile so I can give my missus hers back.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 31. May 2010 at 09:24

Risky Duckfeet wrote on 30. May 2010 at 20:02:
Just need them to get me by for a bit while I save for the new ones. £225 a piece from vauxhall and work has been slow recently. Car is not usable at the minute and haven't got the money for the new ones so I just need a pair to get me mobile so I can give my missus hers back.

What about the really cheap, nasty ebay ones, just to see you through?

Long term, I think the Lemforder ones are the recommended ones, as GM are too dear.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by markspark on 06. Jun 2010 at 14:27
horns delivered and fitted many thanks  :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 06. Jun 2010 at 16:53

markspark wrote on 06. Jun 2010 at 14:27:
horns delivered and fitted many thanks  :y

Thats great :y

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Keyser Soze on 06. Jun 2010 at 21:56
A quick enquiry, do you have a front drivers door check strap available?

Ta in advance

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 06. Jun 2010 at 21:57

Keyser Soze wrote on 06. Jun 2010 at 21:56:
A quick enquiry, do you have a front drivers door check strap available?

Ta in advance

Sold with door, sorry.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Keyser Soze on 06. Jun 2010 at 22:02
No problemo.

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 06. Jun 2010 at 22:06

Keyser Soze wrote on 06. Jun 2010 at 22:02:
No problemo.

Try Darth Loo-knee - he is always breaking cars

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Lazydocker on 06. Jun 2010 at 23:15

TheBoy wrote on 31. May 2010 at 09:24:

Risky Duckfeet wrote on 30. May 2010 at 20:02:
Just need them to get me by for a bit while I save for the new ones. £225 a piece from vauxhall and work has been slow recently. Car is not usable at the minute and haven't got the money for the new ones so I just need a pair to get me mobile so I can give my missus hers back.

What about the really cheap, nasty ebay ones, just to see you through?

Long term, I think the Lemforder ones are the recommended ones, as GM are too dear.


Risky, don't buy from Vx... Lemforder are fine at about £110 pair delivered IIRCC.

I fitted a pair from ebay for about £53 delivered and they've lasted 2 years, and taken quite a bit of abuse if the truth be known :-X ::) ;D

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by Liam on 07. Jun 2010 at 21:24
Hi there TheBoy,

Have you got rear springs for saloon self levelling suspension?  I reckon the slightly old sagged look might be just what I need so my back carries on matching the front:)

Cheers

Title: Re: Breaking: Champagne (Z489) Elite (Facelift)
Post by TheBoy on 07. Jun 2010 at 21:28

Liam wrote on 07. Jun 2010 at 21:24:
Hi there TheBoy,

Have you got rear springs for saloon self levelling suspension?  I reckon the slightly old sagged look might be just what I need so my back carries on matching the front:)

Cheers

Sorry, they went with the car....  :'(

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.