| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
For Sale >> Car Parts, bits For Sale & Wanted >> WANTED: TID Display https://oldsite.omegaowners.com/forum/YaBB.pl?num=1272021813 Message started by adamk on 23. Apr 2010 at 12:23 |
|
|
Title: WANTED: TID Display Post by adamk on 23. Apr 2010 at 12:23
I am looking for a Tid display for my 2002 GLS {yellow plug} GM 24438373 Cheers!
|
|
Title: Re: WANTED: MID Display Post by TheBoy on 23. Apr 2010 at 12:25
To clarify, this is a TID not a MID
|
|
Title: Re: WANTED: MID Display Post by Mr Skruntie on 23. Apr 2010 at 14:10
and in the wrong section. ::)
|
|
Title: Re: WANTED: TID Display Post by Andy Pont on 24. Apr 2010 at 00:24
Hi
What you like with a soldering iron? I picked one up on ebay really cheap, off a vectra. I took a bit of a gamble knowing part number was different to mine, but it had the yellow plug. The circuit board was the same but the housing was different. It meant that there was 3 connections to de-solder and resolder after fitting in my housing. Its a bit of messing about but there seem to be loads of these about all on different part numbers so i assume options are greatly improved if you can 'widen your search'. Dont quote me on this, but i suspect as long as you get the 26pin yellow connector the board will work but casing wont fit. Anyone able to confirm or correct me on this? |
|
Title: Re: WANTED: TID Display Post by charlie on 24. Apr 2010 at 09:31
I've an yellow plug one here,its off an 2.0 gls facelift id letters bj number on back of tid 24400696.If any good pm me .chhers charlie :y
|
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |