Right, moving home in four weeks and will not be taking parts with me, well maybe some  ::)
So here is: need to clear as many parts asap
All cheap to clear!!  :y

Hi,

can you pm me parts you have ??

Regards

Ploppy :y

And me!will be needin a few!

Could do with knowing what your flogging rob,i need a few bits and peicies. :y

lol yh me to to, i gotta no what ya got, cheers

I think he's forgot to put the list in the posting :-?

Mick ;)

RobseyMV6 wrote on 28. Apr 2010 at 18:56:

Right, moving home in four weeks and will not be taking parts with me, well maybe some  ::) So here is: need to clear as many parts asap All cheap to clear!!  :y

& they are ::)

Try me, far to many parts to list.
Don't be asking for washer jets, 17 inch elite alloys boot lid facelift as them bits get sold before i break the cars.

Ok first lot!sia main inlet pipe,the fat one!and half decent front n rear pads n discks? All for a 2.5 v6 s reg

And perhaps set of leads?

mr ICE man wrote on 28. Apr 2010 at 21:13:

And perhaps set of leads?

Have a near new set of leads here, disc and pads can't help maybe get my hands on that air pipe, is that the one before the air filter box?
Will send you a PM  :y

no it's the main hose for the sai valve guessing the inlet.no probs bout brakes matey!

PM sent  8-)

Under headlight trims for facelift,and drivers side xenon headlight :y

plenum caps x4?

unlucky mark mv6 wrote on 29. Apr 2010 at 18:30:

Under headlight trims for facelift,and drivers side xenon headlight :y

Have the light, may have trims too, PM coming  :y

mantagte wrote on 29. Apr 2010 at 18:40:

plenum caps x4?

Should have them some where PM coming

Hi
I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one?

Autobox and torque convertor plus gearshift and MCU.
Basically all the bits to convert an older car to four speed auto.

Andy Pont wrote on 29. Apr 2010 at 22:44:

Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one?

Hi, only have 2.5 clocks and 3.0 and i think they may not be the same?  :-/
Sorry

shammster wrote on 29. Apr 2010 at 22:59:

Autobox and torque convertor plus gearshift and MCU. Basically all the bits to convert an older car to four speed auto.

I don't have a complete car to take that from but i'll PM you someone i know with all the bits you need  :)

RobseyMV6 wrote on 30. Apr 2010 at 06:14:

Andy Pont wrote on 29. Apr 2010 at 22:44: Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one? Hi, only have 2.5 clocks and 3.0 and i think they may not be the same?  :-/ Sorry

I thought they were the same for all models - but I am new to Omegas so dont really know. Could you post or send a photo?

Andy Pont wrote on 30. Apr 2010 at 13:23:

RobseyMV6 wrote on 30. Apr 2010 at 06:14: Andy Pont wrote on 29. Apr 2010 at 22:44: Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one? Hi, only have 2.5 clocks and 3.0 and i think they may not be the same?  :-/ Sorry I thought they were the same for all models - but I am new to Omegas so dont really know. Could you post or send a photo?

Easy way to know, give me your part numbers and i'll check my ones out with yours :y

RobseyMV6 wrote on 30. Apr 2010 at 20:35:

Andy Pont wrote on 30. Apr 2010 at 13:23: RobseyMV6 wrote on 30. Apr 2010 at 06:14: Andy Pont wrote on 29. Apr 2010 at 22:44: Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one? Hi, only have 2.5 clocks and 3.0 and i think they may not be the same?  :-/ Sorry I thought they were the same for all models - but I am new to Omegas so dont really know. Could you post or send a photo? Easy way to know, give me your part numbers and i'll check my ones out with yours :y

It is still in the car at the moment - everything works ok but the tab above the steering wheel has been snapped off, so they are only fixed at one end now. I will pull the dash out over the weekend to try and find a part number. Thanks.

hi dont know if you have what i need but being newbie thought i'd ask, i have 2.2 cd 2001 need cigarette lighter walnut covered tray under radio and also small lift up tray on centre console under arm as such its slim part thanks

Don't think i can help you on that  :'( but will let you know if have this weekend
Thanks  :y

Andy Pont wrote on 29. Apr 2010 at 22:44:

Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one?

got one here mate

Miggster wrote on 30. Apr 2010 at 23:14:

Andy Pont wrote on 29. Apr 2010 at 22:44: Hi I am after a clock/instrument panel surround (if thats the correct description) - casing only for speedo etc. if you have one? got one here mate

There is a brand new one on fleabay for £13 delivered, so prob not worth either of you splitting a set of clocks for? They quote part number as 90509708 and say its for 94-03. Certainly looks like mine - apart from it doesnt have the bottom tag broken off!!  ;D

front left mud flap lol?

Would like an AR35 auto box please.
When can I pick it up?

RobseyMV6 wrote on 29. Apr 2010 at 22:02:

mantagte wrote on 29. Apr 2010 at 18:40: plenum caps x4? Should have them some where PM coming

cheers Rob arrived today :y

Will B wrote on 02. May 2010 at 03:11:

front left mud flap lol?

Sorry, can't help you there :(

mantagte wrote on 06. May 2010 at 18:14:

RobseyMV6 wrote on 29. Apr 2010 at 22:02: mantagte wrote on 29. Apr 2010 at 18:40: plenum caps x4? Should have them some where PM coming cheers Rob arrived today :y

No problem, thanks  :y

georgie wrote on 06. May 2010 at 13:26:

Would like an AR35 auto box please. When can I pick it up?

Do have one but its only as a spare for myself and the few other omegas i have...
Sorry  :(