Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl For Sale >> Car Parts, bits For Sale & Wanted >> Urgent Part needed https://oldsite.omegaowners.com/forum/YaBB.pl?num=1273229412 Message started by Jezzer on 07. May 2010 at 11:50

Title: Urgent Part needed
Post by Jezzer on 07. May 2010 at 11:50

Hi All
I need to get hold of a second hand 'Selector Lever Position Switch' for my 2.0 16v CDX Auto W Reg 2000.
It's the unit on the outside of the box on the drivers side and connects to the lever and a cable to the ECU?

Can anyone advise as VX want £272 + VAT >:(
I'm in Tring, Herts?

Title: Re: Urgent Part needed
Post by Jimbob on 07. May 2010 at 11:51

This Topic was moved here from Omega General Help by Jimbob.

Title: Re: Urgent Part needed
Post by Jimbob on 07. May 2010 at 11:52

Whats wrong with the old one? They can often be opened up, cleaned and fixed. sure we have a guide (check the index in my sig)

edit : here you go

http://www.omegaowners.com/forum/YaBB.pl?num=1267956397

Title: Re: Urgent Part needed
Post by Jezzer on 07. May 2010 at 16:27

Told the old one is malfunctioning?
Gearbox stuck in 'limp/safe mode' tested on Tech2 and advisory to replace unit? all other electrics and box OK. (I do trust the garage ;))

Didn't realise that they can be overhauled, will give it a try first, thanks for the instructions and great pics. :y

Wil let you know how I get on!
JERRY

Title: Re: Urgent Part needed
Post by Jezzer on 07. May 2010 at 16:35

Just a thought, am I looking for anything in particular, apart from making sure its as clean as possible on the inner plates?
I know it seems like a dumb question!
Also, the Multi Meter.... I don have one, but my local garage has a Tech2, I assume they will know what top do?
Regards
JERRY

Title: Re: Urgent Part needed
Post by mr ICE man on 07. May 2010 at 17:15

Just make sure any water and oil is cleaned off and contacts touch.should be fine after!!

Title: Re: Urgent Part needed
Post by TheBoy on 07. May 2010 at 17:29

Also make sure its adjusted right - you can have a good switch, but with poor adjustment. Less likely if its never been adjusted before though...

Title: Re: Urgent Part needed
Post by Jezzer on 07. May 2010 at 18:49

Cheers Fellas, great advice as usual :y
And who knows I may save at least £270 in the process!
Keep you informed.

Lastly, I assume that once I have repaired the switch and re-installed correctly that I will have to have the ECU Gearbox Fault cleared? or will it go automatically when the switch is operating correctly?

Have a good local garage for that, plus I have an Op.com on order which may do it also?

Best Regards

JERRY