Discovered mines are warped the other day, so after a set sharpish as ive got to get car ready before going on honeymoon... anyone got some straight ones laying around or breaking any?

cheers!

I have, but local PO is closed, so cannot post until middle of next week at the earliest :(

£10 + P&P if the timescales are any good to you.

I can get a pair to Glasgow on Saturday morning for you (probably)

£15 ?

i also need a pair of covers.

biggriffin wrote on 04. Jun 2010 at 23:37:

i also need a pair of covers.

got set here you can have them :y
can help replace them if you need

"Warped Covers" is quite a popular myth - usually just the gaskets leak due to the breathers being blocked. :y

pedroMV6 wrote on 05. Jun 2010 at 07:23:

"Warped Covers" is quite a popular myth - usually just the gaskets leak due to the breathers being blocked. :y

Gaskets have been changed twice and all breathers cleaned... i never spotted it until i looked from a different angle the other day, the covers bend out a little where the bolts are, telling me that someone previously has tightened them too much.

They were leaking when i got the car so it was probabl done before then, and seein as i have tightened them up to the correct torque when i done them its caused them to leak. Pain in the ass! lol

Cheers guys, will chuck a PM shortly  :y running about like a blue arsed fly at the moment  :-/

barclay03 wrote on 05. Jun 2010 at 08:32:

pedroMV6 wrote on 05. Jun 2010 at 07:23: "Warped Covers" is quite a popular myth - usually just the gaskets leak due to the breathers being blocked. :y Gaskets have been changed twice and all breathers cleaned... i never spotted it until i looked from a different angle the other day, the covers bend out a little where the bolts are, telling me that someone previously has tightened them too much. They were leaking when i got the car so it was probabl done before then, and seein as i have tightened them up to the correct torque when i done them its caused them to leak. Pain in the ass! lol Cheers guys, will chuck a PM shortly  :y running about like a blue arsed fly at the moment  :-/

Fair enough dude - just checking! :y

if you get a pair of vectra v6 cam covers these are metal ones, not so good looking as the omega ones but still fit none the less!, and you wont get a problem with warped covers again!!! ;D

bongocraig wrote on 08. Jun 2010 at 22:43:

if you get a pair of vectra v6 cam covers these are metal ones, not so good looking as the omega ones but still fit none the less!, and you wont get a problem with warped covers again!!! ;D

But the pressure has to go somewhere when then they block!  :y

Still not got any :(

Have a look here as i have a set for sale :y

http://www.omegaowners.com/forum/YaBB.pl?num=1276106712

Remember to replace the o-rings under the bolt holes.