Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl For Sale >> Car Parts, bits For Sale & Wanted >> 97 2.5v6 engine loom needed https://oldsite.omegaowners.com/forum/YaBB.pl?num=1286993627 Message started by vauxfan2k on 13. Oct 2010 at 19:13

Title: 97 2.5v6 engine loom needed
Post by vauxfan2k on 13. Oct 2010 at 19:13

As above, to fit a 97 model v6, maybe 3.0 is same not sure, I have a 95 loom spare but the sensor connections are different for the cam sensors, dont want to butcher connections so a complete loom would be nice. not sure if it makes any odds but needs to be for a manual.

thanks :)

Title: Re: 97 2.5v6 engine loom needed
Post by Brikhead on 13. Oct 2010 at 22:14

I have one from a '99 3.0 auto.
Usually the looms have a sticker attached with a partnumber printed on them, I'll have a look...
http://www.omegaowners.com/forum/YaBB.pl?num=1286275283

Title: Re: 97 2.5v6 engine loom needed
Post by 2woody on 14. Oct 2010 at 12:50

how about just changing the sensors instead ? it might be easier

Title: Re: 97 2.5v6 engine loom needed
Post by vauxfan2k on 14. Oct 2010 at 13:04

either way id have to change the loom and its easier to change just the loom than the loom AND the sensors.

this way Im certain it will work, its all basically down to a damaged loom connector to the main harness, got wrecked when the previous owner swapped out the engine.

Title: Re: 97 2.5v6 engine loom needed
Post by Brikhead on 14. Oct 2010 at 20:33

It looks like you will need one from a manual vehicle (90566288), the p no. on mine is 90566289.

If you want mine just to butcher the connections then I'll knock a third off the asking price...

Title: Re: 97 2.5v6 engine loom needed
Post by vauxfan2k on 14. Oct 2010 at 20:44

Thanks, found a manual one thanks to a fellow member.

cheers guys ;)