Hello...

Still getting my code 19 so gonna change my crank sensor and hope my car idles properly. Phoned autovaux and they said there's an option of three parts. Gave them my reg and they said that narrows it down to one - the square connector one. However I know I have the oval connector. Apparently there are two options for oval connector that look identical. One is more expensive than the other. Anyone know how I'd tell which one short of removing the old one and looking for a number on it which I can't do for a while, but wanted to get the replacement ready? It's a 98 R mini-facelift 3.0 auto elite if that helps.

Cheers!

Firstly ... do NOT use a pattern part from autovaux .. get GENUINE Vx ONLY .. or you'll be changing it again in a few months.

:(

Liam wrote on 11. Nov 2010 at 20:58:

..... It's a 98 R mini-facelift 3.0 auto elite if that helps. Cheers!

Take your pick crank shaft sensor  :y :y

Crankshaft sensors
2.0 16v to 14194716      90458251      £60.50      £54.46      £47.10

U25TD/X25TD      90487810      £98.50      £88.65      £76.94

2.5 (early models)      90492006      £83.50      £75.15      £65.12

2.5 (later models)      90492061      £61.50      £55.36      £47.88

2.0 8v      90493864      £60.50      £54.46      £47.10

2.0DTi/2.2DTi      90540188      £37.75      £33.98      £29.40

2.6/3.0/3.2      90540743      £55.00      £49.56      £42.63

2.0 16v from 14194717/31000001      9174621      £36.60      £33.00      £28.4