Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Engine code fun :-) https://oldsite.omegaowners.com/forum/YaBB.pl?num=1289570604 Message started by evilClive on 12. Nov 2010 at 14:03

Title: Engine code fun :-)
Post by evilClive on 12. Nov 2010 at 14:03

Right, have just done the paperclip test for the first time on my Miggy which is running a bit rough and sounding like a V8...

Getting the engine codes...

129 Exhaust Gas Recirculation (EGR) Valve Feedback Voltage Low

33 Exhaust Gas Recirculation (EGR) Valve Voltage Low

22 Throttle Position Sensor (TPS) Voltage Low

So before I go get stuck in to what I "think" I should be doing, what would be the best course of action to rectify these faults?

Title: Re: Engine code fun :-)
Post by Welung666 on 12. Nov 2010 at 14:09

Try cleaning your EGR (bolted to the drivers side edge of the plenum), best to use a strong oven cleaner or paint stripper and they gunge up pretty badly. If you don't fancy that and just want to replace it I have a spare one here I know works from a car I'm breaking :y

Title: Re: Engine code fun :-)
Post by tunnie on 12. Nov 2010 at 14:14

as above, i used an old tooth brush to really work the paint stripper in the EGR, its amazing the amount of crap that comes out!

Title: Re: Engine code fun :-)
Post by Welung666 on 12. Nov 2010 at 14:18

tunnie wrote on 12. Nov 2010 at 14:14:

as above, use the wifes favourite tooth brush to really work the paint stripper in the EGR, its amazing the amount of crap that comes out!

That's not very nice Tunnie ;) :P ;D ;D ;D

Title: Re: Engine code fun :-)
Post by evilClive on 12. Nov 2010 at 14:31

Well this doesn't look promising...

I've taken the EGR off and I'm not impressed. The valve was held on with a jubilee clip and an 'L' shaped bracket clamping the two to whatever the EGR bolts to.

The EGR came off in my hand and theres 3 fine thread screws that look like they have been snapped off.

When i unbolted the torque bolts there was a strip of metal blanking two holes that the EGR use.

Thinking "cream crackered"...

Title: Re: Engine code fun :-)
Post by Welung666 on 12. Nov 2010 at 20:12

So the 3 bolts are snapped off in the plenum? Can you take a picture and post it (or email it to me and I'll post it)?

Title: Re: Engine code fun :-)
Post by evilClive on 12. Nov 2010 at 20:41

I've got a picture but currently don't have means of getting it on a computer.

But yes, that sounds right

Title: Re: Engine code fun :-)
Post by Welung666 on 12. Nov 2010 at 20:47

evilClive wrote on 12. Nov 2010 at 20:41:

I've got a picture but currently don't have means of getting it on a computer.

But yes, that sounds right

On your phone by any chance?

Title: Re: Engine code fun :-)
Post by evilClive on 13. Nov 2010 at 11:44

Indeed

Just kick started it this morning and its running unbelieveably rich. Had 80miles range in the tank, drove 16miles and now the fuel light has come on... Thinking possible leak...

Title: Re: Engine code fun :-)
Post by Welung666 on 13. Nov 2010 at 12:47

Send the pic to me and I'll load it up here for you :y

PM for my number ;)