| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> vibration...? https://oldsite.omegaowners.com/forum/YaBB.pl?num=1294779009 Message started by ajay_2.2dti on 11. Jan 2011 at 20:50 |
|
|
Title: vibration...? Post by ajay_2.2dti on 11. Jan 2011 at 20:50
At idlering no vibration, but when i drive down the road at low revs but at a constant speed, it will sort of sway and vibrate
|
|
Title: Re: vibration...? Post by Welung666 on 11. Jan 2011 at 20:56
Any noise acompanying it? If so can you work out where from?
|
|
Title: Re: vibration...? Post by ajay_2.2dti on 11. Jan 2011 at 21:00
no noise, near the gearbox, this is really puzzling me, ive cleaned the maf sensor and egr valve, it feels almost like a misfire, but it aint :o
|
|
Title: Re: vibration...? Post by Welung666 on 11. Jan 2011 at 21:16
Check the condition of the gearbox mounts, rubber donuts at both ends of the prop (including bolt tightness) and the centre prop bearing for any play.
|
|
Title: Re: vibration...? Post by bigdavy60 on 11. Jan 2011 at 23:53 ajay_2.2dti wrote on 11. Jan 2011 at 20:50:
this might seem daft but check your wheel nuts are secure , just when you mention sway im thinking a loose wheel or bearing? |
|
Title: Re: vibration...? Post by Omegatoy on 12. Jan 2011 at 05:48
oops, DMF anyone?
|
|
Title: Re: vibration...? Post by ajay_2.2dti on 12. Jan 2011 at 15:55
thanks fella's, ill check those...
;) DMF lol i hope not... :( |
|
Title: Re: vibration...? Post by Welung666 on 12. Jan 2011 at 15:59 Omegatoy wrote on 12. Jan 2011 at 05:48:
Depends really on whether it happens only when coming off or going on to the clutch when the vibration occours. |
|
Title: Re: vibration...? Post by ajay_2.2dti on 12. Jan 2011 at 16:12
i get it in whilst in gear but with a little accerlation, but i have noticed that in rubber boot in the middle of my propshaft has split
|
|
Title: Re: vibration...? Post by Welung666 on 12. Jan 2011 at 16:37
On the centre bearing? If so that could be the cause (I.E. the centre bearing has collapsed causing the prop to pull excessively and tear the rubber protector). If you lie underneath the car and hold the prop just in front of the centre bearing check to see if there is any up/down/side to side movement :y
|
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |