Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> SAI pipes https://oldsite.omegaowners.com/forum/YaBB.pl?num=1294830972 Message started by johnmjess on 12. Jan 2011 at 11:16

Title: SAI pipes
Post by johnmjess on 12. Jan 2011 at 11:16

Was checking out an iratic idle yesterday to discover the Rubber hose to the SAI valve and the valve melted in places. Anybody had this before and know of a cause for this problem. I can find a replacement hose on Ebay but no Valve. I am describing the plastic valve on the NSF of the engine bay on a 2.5 V6 if anybody can help.

Thanks in advance

John

Title: Re: SAI pipes
Post by Jimbob on 12. Jan 2011 at 11:18

Ive heard of it before, and sure it was diagnosed to a partially blocked exhaust causing too much back pressure, so check this out before replacement else the same could happen again :y