Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Timing on mv6 https://oldsite.omegaowners.com/forum/YaBB.pl?num=1294869360 Message started by unlucky mark mv6 on 12. Jan 2011 at 21:56

Title: Timing on mv6
Post by unlucky mark mv6 on 12. Jan 2011 at 21:56

Is there anyway to tell if the timing is out on a 3.2 without stripping it?,or what else could be the cause of high fuel consumption?. :-/

Title: Re: Timing on mv6
Post by Welung666 on 12. Jan 2011 at 21:58

It can sometimes be seen on live data dependant on how far out and where. Who did the belt last time? PM if you don't want it public ;)

Title: Re: Timing on mv6
Post by unlucky mark mv6 on 13. Jan 2011 at 18:12

Pretty sure it was vx dealer lee,as everything in the history relates to anyway.

Title: Re: Timing on mv6
Post by Darth Loo-knee on 13. Jan 2011 at 18:40

If the timing has being done by a dealer from my experience 8 times out of 10 it will be out. :(

Title: Re: Timing on mv6
Post by chrisgixer on 13. Jan 2011 at 19:50

Multi rams working? Pedal tricked for codes? And all that first?

Title: Re: Timing on mv6
Post by unlucky mark mv6 on 14. Jan 2011 at 00:02

I know what you mean daz,cant even trust a main dealer today,and yes chris,i think its a good idea to try for any codes first.Ill try with my reader tomoz. :y

Title: Re: Timing on mv6
Post by unlucky mark mv6 on 14. Jan 2011 at 00:04

How do i know if the multi rams are working? :-/

Title: Re: Timing on mv6
Post by Entwood on 14. Jan 2011 at 10:54

unlucky mark mv6 wrote on 14. Jan 2011 at 00:04:

How do i know if the multi rams are working? :-/

Does this help ??

http://www.omegaowners.com/forum/YaBB.pl?num=1153840176

:)

Title: Re: Timing on mv6
Post by cem on 14. Jan 2011 at 11:22

your idle will be rough and miss some beats.. and the power will be down..

Title: Re: Timing on mv6
Post by chrisgixer on 14. Jan 2011 at 11:43

unlucky mark mv6 wrote on 14. Jan 2011 at 00:04:

How do i know if the multi rams are working? :-/

Either via tech2, or a good blip of the throttle and watch them actuate, so on the 3.2 an assistant will be needed, throttle cable cars can no blipped from the engine bay but not drive by wire.

Although violent blipping of the throttle may not be such a good idea if the cam belt is suspect for obvious reasons. So up to you. Maybe a thorough inspection of vac pipes and electrical connectors instead? :-/

Title: Re: Timing on mv6
Post by cem on 14. Jan 2011 at 16:15

imo get it checked by a mobile mechanics.. no need to take extra risks..

Title: Re: Timing on mv6
Post by Welung666 on 14. Jan 2011 at 21:10

Mark, if you're not busy Sunday pop over and I'll check the live data etc., and if we can't see anything we'll have the cover off ad check the timing marks :y

Title: Re: Timing on mv6
Post by unlucky mark mv6 on 15. Jan 2011 at 22:09

Thanks mate,i might just do that :y