| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> Omega 2.2 Dti P1125(3) Fault code https://oldsite.omegaowners.com/forum/YaBB.pl?num=1297350389 Message started by omegadti on 10. Feb 2011 at 15:06 |
|
|
Title: Omega 2.2 Dti P1125(3) Fault code Post by omegadti on 10. Feb 2011 at 15:06
Hi I wonder if anyone can advise on this one.
My 2.2 Dti was in the garage for springs, wishbones discs and brakes last week. While it was in I asked them to change the engine oil and filter. I am now suffering from the following problem. The car souinds a bit roughh when idling and when you rev the engine there is a "piston slap" noise. When driving the engine doesn't pull like it should and if you rev near 4000rpm the eml comes on and the car goes into limp home mode. I have read the fault code and P1125(3) Critical Malfunction shows up. I have cleaned the air flow sensor in case it was that. Does anyone have anmy ideas - are there any vac pipes near the oil filter that the mechanic could have disturbed when he changed the filter. The car was running superb before the oil change. |
|
Title: Re: Omega 2.2 Dti P1125(3) Fault code Post by Boditza on 10. Feb 2011 at 19:08
Check intake system/charge air hoses for leaks (secondary air, porosity and blockages)
with a tech 2 read the maf data.. if its broken it will register some wrong values |
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |