Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> 2.0L auto cutting out when hot. https://oldsite.omegaowners.com/forum/YaBB.pl?num=1297368306 Message started by didds on 10. Feb 2011 at 20:05

Title: 2.0L auto cutting out when hot.
Post by didds on 10. Feb 2011 at 20:05

hi i,ve got a 2000 2.0l auto keeps cutting out when hot and coming to a junction and idling. any ideas? thanks.

Title: Re: 2.0L auto cutting out when hot.
Post by Abiton on 10. Feb 2011 at 20:12

Try this :http://www.omegaowners.com/forum/YaBB.pl?num=1189022687

Then if no faults showing, this:
http://www.omegaowners.com/forum/YaBB.pl?num=1194007453

:y

Title: Re: 2.0L auto cutting out when hot.
Post by Brikhead on 10. Feb 2011 at 20:14

Hello and welcome to the site!
Does the car fire straight up when you restart it after it stalls? Is so could be idle control valve issues or a leak on the inlet or vacuum pipe systems...
Does the engine management light come on?

Title: Re: 2.0L auto cutting out when hot.
Post by didds on 10. Feb 2011 at 20:31

yes it starts straight away and no the management light does not come on. cheers

Title: Re: 2.0L auto cutting out when hot.
Post by AylesburyElite on 13. Feb 2011 at 22:12

i have a 3.0l v6 (w reg 2000) when starting from hot or cold revs fluctuate for about a minute then settle at about 450rpm, car ok till i start it again

Title: Re: 2.0L auto cutting out when hot.
Post by Abiton on 14. Feb 2011 at 09:59

AylesburyElite: Tacking your problem onto someone else's thread is known as hijacking. This is generally deemed to be impolite.

If you were talking about the same engine, and had exactly the same symptoms, it would probably be OK; but neither applies, so it would make a lot more sense to start your own thread.

Please note, this is intended to be helpful, not hostile. :y