Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> 3.0clutch slave cylinder...... https://oldsite.omegaowners.com/forum/YaBB.pl?num=1297773598 Message started by HockeyDave55 on 15. Feb 2011 at 12:39

Title: 3.0clutch slave cylinder......
Post by HockeyDave55 on 15. Feb 2011 at 12:39

Hi,

Can anybody tell me the manufacturer of the Clutch Slave Cylinder for a 3.0L 2000my Omega?

I work at a vehicle development centre and know how much an item like this costs us.... like 10 euros...!!!!!

Cheers,

David.

Title: Re: 3.0clutch slave cylinder......
Post by andyc on 15. Feb 2011 at 12:41

LUK are the normal suppliers

Title: Re: 3.0clutch slave cylinder......
Post by HockeyDave55 on 15. Feb 2011 at 13:00

Thanks Andy, I'll look into it....

Is it a common fault? My car has done a little under 146K when it went so I don't know if it happens alot????

Oooo, Does anybody have any Idea what the part number is????

Title: Re: 3.0clutch slave cylinder......
Post by andyc on 15. Feb 2011 at 16:42

Not very common but having said that if the cylinder has blown then theres a good chance its knack the clutch so it would get replaced as part of the clutch kit

Cylinder number is 9126743

Andy

Title: Re: 3.0clutch slave cylinder......
Post by HockeyDave55 on 15. Feb 2011 at 17:00

Thanks, Well the pedal is on the floor and fluid coming from the bottom of the bell housing.... anything else it could be???? Lol....

Title: Re: 3.0clutch slave cylinder......
Post by andyc on 16. Feb 2011 at 10:13

Hi Dave

Sounds like the cylinder but if your taking the box out and the clutch has never been replace you might as well do it at the same time and get a three piece kit for it, just hope you don't have the Caddie Clutch set up

Andy