I need the carbon cannister purge valve for m/f lift .

When trying to remove the rubber pipe from the valve to the plenum top breather I managed to snap the mounting nipple so will need replacing .

Pm if can supply please.

I dont have one - but have replaced one - a pig of a job I can tell you - good luck  :-/

Thanks for words of inspiration,Rob.

I had intended get bits ready for my attempt at o/s exhaust manifold gasket in the Spring,so had hoped it would be quite straight forward with all the top bits removed to get at the coolant transfer pipe.

Still looking for one if anybody has a breaker.

amba wrote on 20. Mar 2011 at 10:07:

Thanks for words of inspiration,Rob. I had intended get bits ready for my attempt at o/s exhaust manifold gasket in the Spring,so had hoped it would be quite straight forward with all the top bits removed to get at the coolant transfer pipe. Still looking for one if anybody has a breaker.

MUCH easier in that case then

I probably have one...but not sure what exactly you are talking about...do you have a picture??

Chris....I will drop you a pm and explain...haven,t mastered the art of adding pictures via forum so only way would be via an email addy.