Omega Owners Forum | |
https://oldsite.omegaowners.com/forum/YaBB.pl
Chat >> General Car Chat >> Speedo https://oldsite.omegaowners.com/forum/YaBB.pl?num=1300963815 Message started by eliteomegaman on 24. Mar 2011 at 11:50 |
Title: Speedo Post by eliteomegaman on 24. Mar 2011 at 11:50
Good morning all what a glorious day! :) :)
A friend of mine has a problem which i thought i'd share with you, the experts! He has a 2000 new shape 2.5 omega & the speedo has started to play up. This has only just started & it's intermittent. It suddenly stops & the traction control & abs light comes on BUT the car still drives fine, then the speedo comes on again after a few miles :-/ Anyone got any ideas & solutions :-? |
Title: Re: Speedo Post by Jimbob on 24. Mar 2011 at 12:09
Sounds very much like the ABS ECU is dying :'(
|
Title: Re: Speedo Post by eliteomegaman on 24. Mar 2011 at 12:14
Oops that sounds like an expensive repair job :o :o :o
Cheers for that :y |
Title: Re: Speedo Post by Proz on 24. Mar 2011 at 12:22
Yes as above its the ABS ecu .... i belive they can be refurbed though for around £130 if i recall .... cant remember which company that does it though .
Im sure someone will tell us who it is shortly though :y |
Title: Re: Speedo Post by Entwood on 24. Mar 2011 at 12:29 Proz wrote on 24. Mar 2011 at 12:22:
I had mine done through BBA-Reman, very pleased .. MDTM knows of another place as well. IIRC options are : 1. New from VX £600 ish plus a tech2 session to set up 2. Second hand .. needs to be from same engine type/size/model year or will also need a tech2 to setup 3. Repair.... around £130 ish with a warranty, no tech2 needed as it is "your" ECU Sent mine monday , got it back friday .. this was on the old car about 3 years back. :) HTH |
Title: Re: Speedo Post by eliteomegaman on 24. Mar 2011 at 13:16
Thanks for your excellant advise Proz & Entwood. I'll pass this on. Cheers :y :y
|
Title: Re: Speedo Post by henryd on 24. Mar 2011 at 14:35 Entwood wrote on 24. Mar 2011 at 12:29:
ecutesting.com I believe :y |
Title: Re: Speedo Post by tigers_gonads on 24. Mar 2011 at 14:56
i know that this is a comon fault
what is the "repair" that they do to the ecu ? is it " dry joints " on the circuit board or do they replace componants ? |
Title: Re: Speedo Post by Entwood on 24. Mar 2011 at 15:00
Its a "specialist" resolder job I believe ... some while back there was a thread with a picture of the internals that showed the fault. Microscopic wires and not a lot of room + the joints are packed in something if memory serves.... certainly not a job for most home soldering irons !!!
I'll see if I can find the thread EDIT : Not the thread I thought of .. but this might suffice .. :) Post #5 http://www.omegaowners.com/forum/YaBB.pl?num=1265622074 BTW .. if MDTM says he can't do it (post #10) ... then it needs a miracle worker !!!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D |
Title: Re: Speedo Post by Albs the oppressed on 24. Mar 2011 at 15:18
I might enquire if its possible to do this where I work. I wouldnt be surprised if it is. If so, a possible cheaper alternative for OOFers ??
Will report back when I find out. |
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |