Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> ticking?
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1301235523

Message started by rickmv6 on 27. Mar 2011 at 15:18

Title: ticking?
Post by rickmv6 on 27. Mar 2011 at 15:18
hi this is probably a silly question  but if the little copper looking pipe that comes off drivers side exhaust maniford was loose at the base would this cause the engine to sound like a hydraulic tick.  sorry for silly question but am stumped in finding this ticking noise.

Title: Re: ticking?
Post by Darth Loo-knee on 27. Mar 2011 at 15:30
Yes mate. It does make a noise when loose etc.. if when you have tightened it up it could be your exhaust manifold gasket :y

Title: Re: ticking?
Post by Albs the oppressed on 27. Mar 2011 at 15:38
Mine is also loose, but I cant see how you can tighten it without removing the coolant transfer pipe. :-/

Title: Re: ticking?
Post by Darth Loo-knee on 27. Mar 2011 at 16:00
Eh? the steel pipe from the exhaust manifold to the egr??
Should be able to tighten it at the bottom (manifold end)

Title: Re: ticking?
Post by Albs the oppressed on 27. Mar 2011 at 16:11
Just had another look Daz. I probably could get a spanner in there to tighten it if the LPG vapouriser and pipework wasnt in the way, so I will probably have to remove that lot to get at it.
The cars is due a big service in the very near future anyway - cambelt,oil,filters,breathers and camcovers look like they are weeping a bit from around the bolts,and I think the box is leaking a bit of ATF as well. so a few things to keep me out of mischief when I get a free weekend. ::)

Title: Re: ticking?
Post by Darth Loo-knee on 27. Mar 2011 at 16:15

Albs wrote on 27. Mar 2011 at 16:11:
Just had another look Daz. I probably could get a spanner in there to tighten it if the LPG vapouriser and pipework wasnt in the way, so I will probably have to remove that lot to get at it.
The cars is due a big service in the very near future anyway - cambelt,oil,filters,breathers and camcovers look like they are weeping a bit from around the bolts,and I think the box is leaking a bit of ATF as well. so a few things to keep me out of mischief when I get a free weekend. ::)



A Crows Foot Spanner maybe of use to you then mate :y
Of the top of my head 24 mm spanner should be the size :)

Title: Re: ticking?
Post by Albs the oppressed on 27. Mar 2011 at 17:48
Do they do them that big ? dont think ive ever seen one, but that doesnt mean they  dont exist I suppose. :-/

Title: Re: ticking?
Post by Darth Loo-knee on 27. Mar 2011 at 18:15

Albs wrote on 27. Mar 2011 at 17:48:
Do they do them that big ? dont think ive ever seen one, but that doesnt mean they  dont exist I suppose. :-/



Yeap ;)

http://cgi.ebay.co.uk/Snap-on-3-8-Drive-24mm-Crows-Foot-Spanner-/190515014099?pt=UK_Hand_Tools_Equipment&hash=item2c5b9469d3

Title: Re: ticking?
Post by Albs the oppressed on 27. Mar 2011 at 18:20
Nice one they do exist then. :y

Im finding it a bit strange that you are being helpful to me today, cant quite get used to it. Are you up to something ? :-/ :P ;D

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.