Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> injector removal help required. https://oldsite.omegaowners.com/forum/YaBB.pl?num=1301921548 Message started by sotmh on 04. Apr 2011 at 13:52

Title: injector removal help required.
Post by sotmh on 04. Apr 2011 at 13:52

I've been able to remove connectors, but removing injectors are proving difficult, also inlet manifold support bracket. Have removed one bolt but was wondering if there were others. If there are I will need to jacyk up to gain access unless anyone knows different. Assistance please

Title: Re: injector removal help required.
Post by PhilRich on 04. Apr 2011 at 15:19

Inlet manifold bracket bolts to the base of the engine block & needs to be undone from underneath the car. The Injectors are just a push fit on 'o' rings & should come out with the Injector rail afaik :-/

Title: Re: injector removal help required.
Post by sotmh on 04. Apr 2011 at 15:59

thanks Phil. :y

Title: Re: injector removal help required.
Post by sotmh on 04. Apr 2011 at 19:18

Unless I'm doing something realy unfathomably ridiculous I still can't remove injectors.

They are able to turn whilst still connected to injector assembly and within the exhaust manifold.

injector connectors are removed also the clips. Am I doing something wrong :question

Title: Re: injector removal help required.
Post by PhilRich on 04. Apr 2011 at 19:32

Hi sotmh, i've sent you a PM :y

Title: Re: injector removal help required.
Post by sotmh on 05. Apr 2011 at 13:03

PM SENT