Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Self levelling - need engine running ? https://oldsite.omegaowners.com/forum/YaBB.pl?num=1303148093 Message started by Albs on 18. Apr 2011 at 18:34

Title: Self levelling - need engine running ?
Post by Albs on 18. Apr 2011 at 18:34

As above - does the engine need to be running for the self levelling to work, or should it operate (by manually moving the sensor arm) with just the ignition on ?

Title: Re: Self levelling - need engine running ?
Post by Kevin Wood on 18. Apr 2011 at 18:58

Should only need the ignition on as far as I can see.

Kevin

Title: Re: Self levelling - need engine running ?
Post by henryd on 18. Apr 2011 at 19:02

Mine works with just the ignition on,I was playing with it a couple of weeks ago when I replaced the shocks :y

Title: Re: Self levelling - need engine running ?
Post by The Red Baron on 18. Apr 2011 at 19:15

Albs wrote on 18. Apr 2011 at 18:34:

As above - does the engine need to be running for the self levelling to work, or should it operate (by manually moving the sensor arm) with just the ignition on ?

just the ignition. :y

Title: Re: Self levelling - need engine running ?
Post by Albs on 18. Apr 2011 at 19:37

Thanks all, will have a play tomorrow. :y

Title: Re: Self levelling - need engine running ?
Post by danzigfan on 18. Apr 2011 at 19:50

Just ignition. I know, because "check" due to self levelling not working appears before starting engine :'(

Title: Re: Self levelling - need engine running ?
Post by amba on 18. Apr 2011 at 20:57

Sorry to hijack this,but curious to know if you can make much difference to the ride height by altering the arms position on the rear sensor...