Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
Chat >> General Car Chat >> Re furbed spotstars
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1303239454

Message started by chrisgixer on 19. Apr 2011 at 19:57

Title: Re furbed spotstars
Post by chrisgixer on 19. Apr 2011 at 19:57
...what an almighty pita!
60 screw threads to clear of sand
60 screw threads to re tap and remove the paint
60 screw threads to clear with an airline
60 bolts to lock tite
60 bolts to screw in (with a torx in an air drill, feck that)
60 bolts to check finally tight

4 wheels to remove
4 wheels to clean
4 wheels to fit, obviously.
4 wheels to sand the paint out of the centre or they won't fit on
4 wheels to clean the wheel to hub face off do they sit flat
4 wheels to pull over and check I've put them on the right way round then realise I haven't checked the tyre pressures x4, one on 39 rest on 27psi.

All for the bargain price of £192!

I ain't doing that again... Do look nice though 8-).  ;D

Title: Re: Re furbed spotstars
Post by Jimbob on 19. Apr 2011 at 20:03
sounds like serious dedication!

Title: Re: Re furbed spotstars
Post by Albs on 19. Apr 2011 at 20:21
Or obsessive compulsive. ;D ;D

Title: Re: Re furbed spotstars
Post by VXL V6 on 19. Apr 2011 at 20:25
Get some pics up! Bet it looks good.

On another note.... What wheels have come off? Late Elite/MV6 Perchance?
::)

Title: Re: Re furbed spotstars
Post by chrisgixer on 19. Apr 2011 at 21:37
Poor light, poor angle, and too far away, but here you go.


Old ones going back on at some later date as yet decided.  ;)

Oh and yet to put the bolt caps back on by the looks... 

Btw sc3 so much better the previous potenza/p6000 combo. Quieter smoother more responsive, and grippier of course. 8-).   But no surprise there really.  :y

Title: Re: Re furbed spotstars
Post by The Red Baron on 19. Apr 2011 at 21:41
looks very nice indeed.  :y

Title: Re: Re furbed spotstars
Post by Entwood on 19. Apr 2011 at 21:44
Where do you get the "90" bolts /screws from ...  I only see 15 per wheel ... which is 60 in all .... slight exageration looking for the sympathy vote ??? or just can't count ???

;D ;D ;D ;D ;D

(look nice now mind ..  :y :y  )

Title: Re: Re furbed spotstars
Post by VXL V6 on 19. Apr 2011 at 21:44
Now that looks excellent, is that sitting on Irmscher springs and Bilston B4's as discussed some time back?

Also... may be the angle of the photo but where is the boot spoiler?

Do love black cars, just hated having to constantly wash the last black car I had!

Note to self... must make a start on your Telematics Loom  :-[

Title: Re: Re furbed spotstars
Post by chrisgixer on 19. Apr 2011 at 21:51

Entwood wrote on 19. Apr 2011 at 21:44:
Where do you get the "90" bolts /screws from ...  I only see 15 per wheel ... which is 60 in all .... slight exageration looking for the sympathy vote ??? or just can't count ???

;D ;D ;D ;D ;D

(look nice now mind ..  :y :y  )

FFS, I checked the post first as well, I am that knackered. The 9 is correct, it's just upside down... 69 96... Who's counting. ::).  ;D
:-[.  ;D.  :y

Title: Re: Re furbed spotstars
Post by chrisgixer on 19. Apr 2011 at 22:01
[quote author=4846524148281E0 link=1303239454/7#7 date=1303245863]Now that looks excellent, is that sitting on Irmscher springs and Bilston B4's as discussed some time back?

Also... may be the angle of the photo but where is the boot spoiler?

Do love black cars, just hated having to constantly wash the last black car I had!

Note to self... must make a start on your Telematics Loom  :-[/quote]
Suspension as you say.  :)

It's the crap angle, boot spoiler is there.

I don't clean it any more than the last one, but it has some bad swirls in the paint and an almost milky look from some sort of wax that's gradually waring off.  :(.


Was discussing the Telematics location with TB last weekend.... in Bose shelf above lpg tank? In first aid cupboard? Over by the blind plug? Leave it in the glove box. TB was trying hard to make your life easier, saying the glove box is hopelessly small as standard anyway. Then on inspection I found a lap top in his  ;D. Too small indeed. :D

Anyway, it needs a loom as there is none at all ATM, so may as well be a long loom if at all...?  :y

Title: Re: Re furbed spotstars
Post by CaptainZok on 19. Apr 2011 at 22:10
Must be the stresses of dodging the short shouty bloke affecting your counting eh Chris. ;D ;D

Title: Re: Re furbed spotstars
Post by Desperate Den on 19. Apr 2011 at 22:16

chrisgixer wrote on 19. Apr 2011 at 21:37:
Poor light, poor angle, and too far away, but here you go.

http://i344.photobucket.com/albums/p326/chrisgixer/9b53ddc1.jpg



Old ones going back on at some later date as yet decided.  ;)

Oh and yet to put the bolt caps back on by the looks... 

Btw sc3 so much better the previous potenza/p6000 combo. Quieter smoother more responsive, and grippier of course. 8-).   But no surprise there really.  :y




I have to say that car (and wheels) looks very well indeed - well done. 8-) :-*

It's knocking on Bob Dent's door in terms of desirability.

Title: Re: Re furbed spotstars
Post by VXL V6 on 19. Apr 2011 at 22:17

chrisgixer wrote on 19. Apr 2011 at 22:01:
[quote author=4846524148281E0 link=1303239454/7#7 date=1303245863]Now that looks excellent, is that sitting on Irmscher springs and Bilston B4's as discussed some time back?

Also... may be the angle of the photo but where is the boot spoiler?

Do love black cars, just hated having to constantly wash the last black car I had!

Note to self... must make a start on your Telematics Loom  :-[/quote]
Suspension as you say.  :)

It's the crap angle, boot spoiler is there.

I don't clean it any more than the last one, but it has some bad swirls in the paint and an almost milky look from some sort of wax that's gradually waring off.  :(.


Was discussing the Telematics location with TB last weekend.... in Bose shelf above lpg tank? In first aid cupboard? Over by the blind plug? Leave it in the glove box. TB was trying hard to make your life easier, saying the glove box is hopelessly small as standard anyway. Then on inspection I found a lap top in his  ;D. Too small indeed. :D

Anyway, it needs a loom as there is none at all ATM, so may as well be a long loom if at all...?  :y


No problem, as mentioned at some point in the past, I think it's best I construct the loom in two halves then graft it together when fitting to your car, that way the loom will be the exact length and a custom fit to the vehicle. Can also cut down on some of the wire runs as they can be readily picked up from the boot area.

Title: Re: Re furbed spotstars
Post by Brikhead on 19. Apr 2011 at 23:19
Nice looking car...
I would have guessed that the bolt heads on the wheels were decorative and cast into the alloy... What are they holding on?

Title: Re: Re furbed spotstars
Post by hotel21 on 19. Apr 2011 at 23:41

Brikhead wrote on 19. Apr 2011 at 23:19:
Nice looking car...
I would have guessed that the bolt heads on the wheels were decorative and cast into the alloy... What are they holding on?


Nowt, apart from their decorative exultation....   8-)

Title: Re: Re furbed spotstars
Post by v6alex on 20. Apr 2011 at 00:11
Lovely car and lovely wheels :)

Title: Re: Re furbed spotstars
Post by bobdent on 20. Apr 2011 at 09:18

chrisgixer wrote on 19. Apr 2011 at 21:37:
Poor light, poor angle, and too far away, but here you go.


Old ones going back on at some later date as yet decided.  ;)

Oh and yet to put the bolt caps back on by the looks... 

Btw sc3 so much better the previous potenza/p6000 combo. Quieter smoother more responsive, and grippier of course. 8-).   But no surprise there really.  :y


Looking really good Chris. :y

Title: Re: Re furbed spotstars
Post by Jim on 20. Apr 2011 at 09:37
Are they 18" or 17"??

Title: Re: Re furbed spotstars
Post by chrisgixer on 20. Apr 2011 at 10:34

CaptainZok wrote on 19. Apr 2011 at 22:10:
Must be the stresses of dodging the short shouty bloke affecting your counting eh Chris. ;D ;D

... It's a worry. Keep looking over my shoulder.  ;D

Title: Re: Re furbed spotstars
Post by TheBoy on 20. Apr 2011 at 13:57

chrisgixer wrote on 19. Apr 2011 at 21:37:
Btw sc3 so much better the previous potenza/p6000 combo. Quieter smoother more responsive, and grippier of course. 8-).   But no surprise there really.  :y

the potenza were a bit disappointing IMHO, though still a reasonable tyre. Given the suspension setup, I think it showed the deficiencies of the tyres, ESP in roundabouts ;)

Still ten million times better than those shitty michelins I have - I'd even swap them for falkens :o

Title: Re: Re furbed spotstars
Post by TheBoy on 20. Apr 2011 at 14:01
Gayboygixers car is a nice looking one. Not as nice as ianu's identical looking one, which is gorgeous.

Not normally a fan of black cars, but the elites do look good IMHO

I'm sure someone as anal as gixerboy will sort out the swirls in the paint, and the imperfections on rear wing

Title: Re: Re furbed spotstars
Post by Brikhead on 20. Apr 2011 at 22:53
S'funny, I saw some these wheels today on a Meriva... I'm not sure of the size but they were four stud...


TheBoy wrote on 20. Apr 2011 at 14:01:
Not normally a fan of black cars, but the elites do look good IMHO

Almost any car looks good in black? ;)


Title: Re: Re furbed spotstars
Post by chrisgixer on 20. Apr 2011 at 23:01

TheBoy wrote on 20. Apr 2011 at 13:57:

chrisgixer wrote on 19. Apr 2011 at 21:37:
Btw sc3 so much better the previous potenza/p6000 combo. Quieter smoother more responsive, and grippier of course. 8-).   But no surprise there really.  :y

the potenza were a bit disappointing IMHO, though still a reasonable tyre. Given the suspension setup, I think it showed the deficiencies of the tyres, ESP in roundabouts ;)

Still ten million times better than those shitty michelins I have - I'd even swap them for falkens :o

I wish you'd said that earlier, like a year ago.

Title: Re: Re furbed spotstars
Post by chrisgixer on 21. Apr 2011 at 00:13

Jim wrote on 20. Apr 2011 at 09:37:
Are they 18" or 17"??

Sorry Jim, they are 18s...

Title: Re: Re furbed spotstars
Post by ianu on 22. Apr 2011 at 09:49

TheBoy wrote on 20. Apr 2011 at 14:01:
Gayboygixers car is a nice looking one. Not as nice as ianu's identical looking one, which is gorgeous.

Not normally a fan of black cars, but the elites do look good IMHO

I'm sure someone as anal as gixerboy will sort out the swirls in the paint, and the imperfections on rear wing

Thanks TB - stick with it Chris. The wheels look great   8-) and TB's right it'll be the swirls that are getting in the way of that beautiful deep shine - maybe I can give you a hand with that the next time we meet  :y ...it's all about patience  and technique  (like most things that give you pleasure  ::) ).
Talking of meets....I think the go karts at Warwick are open now  :P

Cheers
Ian

Title: Re: Re furbed spotstars
Post by TheBoy on 22. Apr 2011 at 11:26
It is time for another Oxford meet....  ....now where is that untrustworthy, 2nd hand car dealer :P ;D

Title: Re: Re furbed spotstars
Post by chrisgixer on 22. Apr 2011 at 13:13

TheBoy wrote on 22. Apr 2011 at 11:26:
It is time for another Oxford meet....  ....now where is that untrustworthy, 2nd hand car dealer :P ;D

Oi, you leave Josh alone, nasty admin person.  :P

Very pleased with my car thank you Josh  :y

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.