Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> ABS/Speed sensors https://oldsite.omegaowners.com/forum/YaBB.pl?num=1304248686 Message started by RolandL on 01. May 2011 at 12:18

Title: ABS/Speed sensors
Post by RolandL on 01. May 2011 at 12:18

Goog afternoon people.

I am trying to remove (for cleaning) the front wheel ABS/Speed sensors. Is there a knack to it? I have removed the small bolt and (according to Haynes) you should be able to withdraw the sensors. They won't budge. The two at the rear in diff came out no problem.

The front two have no movement at all, won't twist or pull out. Don't want to use too much force, don't want to break them.

Any ideas on how to get them out

Title: Re: ABS/Speed sensors
Post by RobG on 01. May 2011 at 12:21

99% of the time they break when trying to remove. Have you tried giving the reluctor rings a good clean?

Title: Re: ABS/Speed sensors
Post by chrisgixer on 01. May 2011 at 12:26

Entwood had similar issues, they'll break, leave em be tbh.

Title: Re: ABS/Speed sensors
Post by RolandL on 01. May 2011 at 12:30

RobG wrote on 01. May 2011 at 12:21:

99% of the time they break when trying to remove. Have you tried giving the reluctor rings a good clean?

If you mean the cog things that spin pass the sensor? I have given the rears a clean.

ps what would be cost of a replacement nsf, (top lose) and best place to get one from?

Title: Re: ABS/Speed sensors
Post by RobG on 01. May 2011 at 12:31

Two on the front hubs as well