Will my facelift 2.0 16v year 2000 have cruise fitted and only needs a new stalk to operate this ? i hear some models will have this  :o :o :o

If it`s a 2.0ltr CD nope. You`ll need cruise stalk, actuator with cable, bracket on throttle body (rare only fitted to 2.0 CDX) possibly 4-pin brake switch (if not already fitted, doubtfull due to MY) plus a chat with TechII :-/

RobG wrote on 07. May 2011 at 22:54:

If it`s a 2.0ltr CD nope. You`ll need cruise stalk, actuator with cable, bracket on throttle body (rare only fitted to 2.0 CDX) possibly 4-pin brake switch (if not already fitted, doubtfull due to MY) plus a chat with TechII

ITS A GLS  :o SO THATS A NO I TAKE IT

You`ll need to find a 2.0ltr CDX being broken, doesn`t need to be facelift but must be 2.0ltr CDX

RobG wrote on 07. May 2011 at 23:01:

You`ll need to find a 2.0ltr CDX being broken, doesn`t need to be facelift but must be 2.0ltr CDX

Thanks rob , great advice and noted will do that :y

RobG wrote on 07. May 2011 at 22:54:

If it`s a 2.0ltr CD nope. You`ll need cruise stalk, actuator with cable, bracket on throttle body (rare only fitted to 2.0 CDX) possibly 4-pin brake switch (if not already fitted, doubtfull due to MY) plus a chat with TechII

I fit criuse control kit to MY2000 GLS
and dont need throttle bracket or tech II

What did you use to hold the cruise cable on the throttle body :question

RobG wrote on 07. May 2011 at 23:32:

What did you use to hold the cruise cable on the throttle body :question

there was alredy space for mount cable, will take photo when I go to scrap yard :y

EDIT:  have look here http://www.google.co.uk/imgres?imgurl=http://img08.allegroimg.pl/photos/oryginal/13/96/34/43/1396344349&imgrefurl=http://xarchiwum.pl/aci/opel%2Bomega%2Bb%2Bfl%2Bprzepustnica.html&usg=__BQCextOk_5j902EsXvExR2tIJwI=&h=446&w=595&sz=182&hl=en&start=0&zoom=1&tbnid=dABb3lwQergIdM:&tbnh=109&tbnw=146&ei=IsrFTYzSAtDn-ga_z4nXAQ&prev=/search%3Fq%3Domega%2B2.0%2Bprzepustnica%26hl%3Den%26sa%3DX%26rlz%3D1W1SKPB_en%26biw%3D987%26bih%3D482%26tbm%3Disch%26prmd%3Divns&itbs=1&iact=rc&dur=290&page=1&ndsp=15&ved=1t:429,r:0,s:0&tx=86&ty=41

my 98 mini facelift 2.0l bracket with cruse holder but needed pedal switch no need for tech 2
my 96 prefacelift 2.0l was same as i remember

Tech2 not reqd

Can I fit cruise to my 98, 2.5 mini-facelift?

M Kerr wrote on 09. May 2011 at 10:18:

Can I fit cruise to my 98, 2.5 mini-facelift?

almost certainly,

check you have the connector out the way on the suspension turret behind water bottle.

then get cruise actuator & cable, stalk, and brake switch (and clutch switch if manual) and away you go.

Guides on how to in the maint section.  :y

Top man Jimbob! That should give my right foot a break.

Many thanks, :y