Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> irmscher wheels
https://oldsite.omegaowners.com/forum/YaBB.pl?num=1305301028

Message started by pie on 13. May 2011 at 16:37

Title: irmscher wheels
Post by pie on 13. May 2011 at 16:37
hi,is it possible to fit wheels with 235 45 17 to 2000 w reg 2.5 td,cd estate with causing rubbing ,or will i need to change springs .

Title: Re: irmscher wheels
Post by MV6Matt on 13. May 2011 at 16:45

pie wrote on 13. May 2011 at 16:37:
hi,is it possible to fit wheels with 235 45 17 to 2000 w reg 2.5 td,cd estate with causing rubbing ,or will i need to change springs .


If you're on Irmscher Wheels (are they the Pre-facelift MV6 ones - just seen you drive an MV6) then no problem, I used exactly this set up after having dropped the car.
Shouldn't be a problem.
(Look at my avatar - that pic shows 235/45/17 rubber on the Ill suited Pre-facelift MV6  Irmscher wheel)
What sort of Irmscher wheels are they? S/Stars?

Matthew

Title: Re: irmscher wheels
Post by pie on 13. May 2011 at 16:51
thanks for swift reply,they are actually mark one style,two tone.
ian

Title: Re: irmscher wheels
Post by MV6Matt on 13. May 2011 at 17:06

pie wrote on 13. May 2011 at 16:51:
thanks for swift reply,they are actually mark one style,two tone.
ian


You've lost me - pics of stationary wheel?
(although the two tone would suggest what you see in my avatar pic)

Title: Re: irmscher wheels
Post by TheBoy on 13. May 2011 at 17:21
Any standard Omega wheel will fit any other Omega.

Those prefacelift MV6 wheels are lovely to look at (until the corrosion gets to them) but soft as french cheese.  They only need to sniff a pothole and they're buckled....

Title: Re: irmscher wheels
Post by pie on 13. May 2011 at 20:57
thanks guys,
pie

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.