Omega Owners Forum | |
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> Alarm reset.........? https://oldsite.omegaowners.com/forum/YaBB.pl?num=1306577168 Message started by Rayviator on 28. May 2011 at 11:06 |
Title: Alarm reset.........? Post by Rayviator on 28. May 2011 at 11:06
Hey guys. After snapping my key I had to wait for a replacement from the dealer. During this wait my battery went totally flat. Now, when I try to jump start it, it just keeps on turning over but never firing. And, as I turn the key, the alarm makes a little chirp noise. Is the alarm stopping me from starting????
|
Title: Re: Alarm reset.........? Post by Brikhead on 28. May 2011 at 11:25
If the immobilizer is stopping your car from starting then the e.m.l. should flash.
|
Title: Re: Alarm reset.........? Post by Brikhead on 28. May 2011 at 11:26
Have you misplaced the little chip from inside your key housing?
|
Title: Re: Alarm reset.........? Post by Brikhead on 28. May 2011 at 11:33 |
Title: Re: Alarm reset.........? Post by Rayviator on 28. May 2011 at 12:17
Nope still there. It's a brand new key from Belgium
Brikhead wrote on 28. May 2011 at 11:26:
|
Title: Re: Alarm reset.........? Post by Rayviator on 28. May 2011 at 12:17
Elm ?
Brikhead wrote on 28. May 2011 at 11:25:
|
Title: Re: Alarm reset.........? Post by fiend61 on 28. May 2011 at 12:41 Quote:
light which shows car with spanner through it :y |
Title: Re: Alarm reset.........? Post by Rayviator on 28. May 2011 at 23:51
yes mate, its flashing like its never flashed before. does this have something to do with my new key?
fiend61 wrote on 28. May 2011 at 12:41:
|
Title: Re: Alarm reset.........? Post by Brikhead on 29. May 2011 at 00:12
You need the little chip from your OLD key, it's coded to the Engine Control Unit in your car, thats why your Engine Management Light is flashing...
|
Title: Re: Alarm reset.........? Post by Rayviator on 29. May 2011 at 11:58
Hmmmmm, I threw that away as I give the dealer my owners manual to them which had a card inside with the code on it
Brikhead wrote on 29. May 2011 at 00:12:
|
Title: Re: Alarm reset.........? Post by fiend61 on 29. May 2011 at 16:43 Quote:
oh dear looks like your bu**ered then the key needs the transponder chip to talk to the immobiliser :( Quote:
just read this and seems to me that the new transponder/chip hasnt been done/programmed right :-/ Quote:
you want this back >:( and the dealer to do the chip correctly >:( |
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |