Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> changing crankshaft sensor https://oldsite.omegaowners.com/forum/YaBB.pl?num=1306683022 Message started by henri on 29. May 2011 at 16:30

Title: changing crankshaft sensor
Post by henri on 29. May 2011 at 16:30

Hi all
Just a small problem trying to remove sensor at filter end but have'nt got a key to do the job anyone tell me the type of bolt it is,have got male torx keys but this looks like I need a female key? :-/

Title: Re: changing crankshaft sensor
Post by danzigfan on 29. May 2011 at 16:36

I had the same peoblem a month ago. You need a female torx and good nerves

Title: Re: changing crankshaft sensor
Post by danzigfan on 29. May 2011 at 16:43

Pic of Crank sensor/Eng No. location V6

Title: Re: changing crankshaft sensor
Post by fiend61 on 29. May 2011 at 16:52

Quote:

You need a female torx and good nerves

dont know about the nerves????????????? easy job to do ;)
if you cant get a torx socket either a 10mm or 8mm ordinary socket (cant remember which) tapped on will remove it :y

Title: Re: changing crankshaft sensor
Post by danzigfan on 29. May 2011 at 17:25

I hope it's easyer to do it on 2.5 , but i had to move away so many things just to get to it on my 2.0

Title: Re: changing crankshaft sensor
Post by henryd on 29. May 2011 at 17:54

danzigfan wrote on 29. May 2011 at 17:25:

I hope it's easyer to do it on 2.5 , but i had to move away so many things just to get to it on my 2.0

Easy to change on the v6 but follow the guide in the maintenance section re re-routing the cable