| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> how to remove ignition lock cylinder without key https://oldsite.omegaowners.com/forum/YaBB.pl?num=1311449526 Message started by AjOmega on 23. Jul 2011 at 20:32 |
|
|
Title: how to remove ignition lock cylinder without key Post by AjOmega on 23. Jul 2011 at 20:32
hey im trying to remove an igntion lock cylinder on a cadillac catera but i dont have a key and im not trying to ruin the piece. I tried putting the alley key in the small hole but it still didnt come out any suggestions?
|
|
Title: Re: how to remove ignition lock cylinder without key Post by Andy B on 23. Jul 2011 at 21:15 AjOmega wrote on 23. Jul 2011 at 20:32:
You need a key, that the point of needing a key in the lock ;) The only way to remove it without a key is to drill down the centre (center ::)) and then remove the remnants of the tumblers. :y :y |
|
Title: Re: how to remove ignition lock cylinder without key Post by AjOmega on 23. Jul 2011 at 21:26
Alright thanks :)
|
|
Title: Re: how to remove ignition lock cylinder without key Post by Lazydocker on 24. Jul 2011 at 20:55
Or a slide hammer with a hardened screw in the end ;) But either of these methods will destroy the barrel ;)
|
|
Title: Re: how to remove ignition lock cylinder without key Post by tango on 25. Jul 2011 at 01:02
if you aint got the key
easiest way would be to break it off |
|
Title: Re: how to remove ignition lock cylinder without key Post by AjOmega on 25. Jul 2011 at 16:08
yea ima try breaking it off cuz the car is at a pull yard so they wont care then ill just go to a locksmith to get a key for it.
|
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |