| Omega Owners Forum | |
|
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega General Help >> changing heater bypass valve https://oldsite.omegaowners.com/forum/YaBB.pl?num=1311525219 Message started by derek89 on 24. Jul 2011 at 17:33 |
|
|
Title: changing heater bypass valve Post by derek89 on 24. Jul 2011 at 17:33
I have a leek at the back of the engine and was told it may be the HBV,can anyone help on how to change it please?
|
|
Title: Re: changing heater bypass valve Post by Andy B on 24. Jul 2011 at 17:37 derek89 wrote on 24. Jul 2011 at 17:33:
we only do a guide on leaks ::) ::) http://www.omegaowners.com/forum/YaBB.pl?num=1193594464 :y |
|
Title: Re: changing heater bypass valve Post by fiend61 on 24. Jul 2011 at 17:37
basically locate it, looks like starship enterprise then release the clips holding the pipes to it, pull off pipes taking note of which one goes where, take off vacuum pipe on top then replace with new hbv simples :y oh and a box of plasters and swear box would be handy ;D ;D
|
|
Title: Re: changing heater bypass valve Post by fiend61 on 24. Jul 2011 at 17:38
he is from wales rob ;D ;D ;D
ummm i mean andy :-[ |
|
Title: Re: changing heater bypass valve Post by Andy B on 24. Jul 2011 at 17:40
[quote author=3B343833396B6C5D0 link=1311525219/3#3 date=1311525496]he is from wales rob ;D ;D ;D
ummm i mean andy :-[/quote] ;D ;D ;D ;D |
|
Title: Re: changing heater bypass valve Post by Bionic on 24. Jul 2011 at 17:48
Wierd place to store a leek I reckon? Mobile grocer maybe?
( you may be new m8, but you are bound to get some stick with a spelling mistake like that one.... its all in good fun though and you have had the location of the How To so all should be well now.) If you want a few laughs go to the Discussion area. There are some right pearls on there......... ;D ;D :D |
|
Title: Re: changing heater bypass valve Post by derek89 on 24. Jul 2011 at 17:59
my shoulders are broad but my spelin? not to good,and i can take a joke if not too personal
|
|
Title: Re: changing heater bypass valve Post by Alex W on 24. Jul 2011 at 18:08
I just changed mine on my V6. Its not a hard job to do the worst part is just gaining access. You definately need the plasters to hand.
|
|
Title: Re: changing heater bypass valve Post by Guffer on 24. Jul 2011 at 19:18
If you take the scuttle off its an easy job and no plasters are required. Should only take 20 mins :y
|
|
Title: Re: changing heater bypass valve Post by Andy B on 24. Jul 2011 at 19:19 derek89 wrote on 24. Jul 2011 at 17:59:
Nothing personal intended ;) ;) ;) |
|
Title: Re: changing heater bypass valve Post by Andy B on 24. Jul 2011 at 19:22 Guffer wrote on 24. Jul 2011 at 19:18:
Depends how big your hands are ::) ::) and I took a leisurely hour when I last changed mine. :y :y |
|
Title: Re: changing heater bypass valve Post by Guffer on 24. Jul 2011 at 19:37 Andy B wrote on 24. Jul 2011 at 19:22:
I have rather large hands and it poses me no problems without the scuttle ;) |
|
Title: Re: changing heater bypass valve Post by Alex W on 24. Jul 2011 at 20:08 Guffer wrote on 24. Jul 2011 at 19:37:
I took the scuttle and the plenum off, and the cable support bracket too, after it took the skin off my forearm. But I triumphed in the end!!! |
|
Title: Re: changing heater bypass valve Post by derek89 on 24. Jul 2011 at 20:13
I have done very little work on the car myself so am fairly ignorant as to home servicing,is there much involved in removing the scuttle
|
|
Title: Re: changing heater bypass valve Post by Alex W on 24. Jul 2011 at 20:15 derek89 wrote on 24. Jul 2011 at 20:13:
Its really quite easy, you should browse through the maintenace guides, there are step by step instructions for doing just about everything there. Its a fantastic resource. |
|
Title: Re: changing heater bypass valve Post by Andy B on 24. Jul 2011 at 20:24 Guffer wrote on 24. Jul 2011 at 19:37:
I've no idea how you managed that ............. I didn't consider the job with the scuttle in place. ;) |
|
Title: Re: changing heater bypass valve Post by Richard Bristol on 25. Jul 2011 at 16:29
I did it for the first time last week using the excellent photo's and notes from the maintenence guides. If you get a mate to help it should take no more than about 45 mins and no loss of skin.
|
|
Title: Re: changing heater bypass valve Post by dad1uk on 25. Jul 2011 at 17:13 derek89 wrote on 24. Jul 2011 at 20:13:
http://www.omegaowners.com/forum/YaBB.pl?num=1285581852 |
|
Title: Re: changing heater bypass valve Post by Osprey on 25. Jul 2011 at 18:42
Relatively kerfuffle-free - ten minute job as long as the wipers co-operate. Guide as Dad above ^^^.
Go carefully with the tacky plastic twist clips under the windscreen rubber as they break easily if you do anything Schwarzenegger with them. ;) |
|
Title: Re: changing heater bypass valve Post by robson on 25. Jul 2011 at 18:55
I quite agree about the twist clips but they are available from main dealer
|
|
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |