Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> wiring problem https://oldsite.omegaowners.com/forum/YaBB.pl?num=1314280579 Message started by Raymienets on 25. Aug 2011 at 14:56

Title: wiring problem
Post by Raymienets on 25. Aug 2011 at 14:56

Temp Gauge stopped working. Have located loose wire about 3 inches long coming from ecu temp sender. Have pic showing this wire connects to right of this to temp dial sender. Problem I have this is the wire has a spade connector and the connection for the temp sender is round. Has a some sort of connection came loose and got lost or what. Any advice would be grateful. Awkward to post any pic as it is at the back of engine.

Title: Re: wiring problem
Post by Guffer on 25. Aug 2011 at 15:15

Your eyes are not deceiving you, the spade will go on the round connector :y

Title: Re: wiring problem
Post by Raymienets on 25. Aug 2011 at 15:27

Cheers will give it ago
:y

Title: Re: wiring problem
Post by Andy B on 25. Aug 2011 at 16:11

Raymienets wrote on 25. Aug 2011 at 15:27:

Cheers will give it ago
:y

Goes on like this ..... :y

Title: Re: wiring problem
Post by Raymienets on 25. Aug 2011 at 16:35

Raymienets wrote on 25. Aug 2011 at 15:27:

Cheers will give it ago
:y

Sorted thanks, been searching about for ages looking for another connection.