Omega Owners Forum | |
https://oldsite.omegaowners.com/forum/YaBB.pl
Omega Help >> Omega Electrical and Audio Help >> Bose specifications https://oldsite.omegaowners.com/forum/YaBB.pl?num=1314984754 Message started by Shimmy on 02. Sep 2011 at 18:32 |
Title: Bose specifications Post by Shimmy on 02. Sep 2011 at 18:32
Nothing urgent here, just curious to know the full specifications of the Bose setup in a 3.2 Elite.
I found this picture: Does anyone else have any more detailed information on the speakers/tweeters and amplifier? Thanks. |
Title: Re: Bose specifications Post by VXL V6 on 03. Sep 2011 at 10:00
Just remember it's all based around non-standard 2 Ohm speakers and the head units have to be put into Bose mode (lowered output to drive Bose Amp correctly) and your about covered!
If you want to improve the system in any way you will have to loose the whole setup: Speakers, Amp, Headunit, Bose Loom. You will also need to loop the speaker connections back at the kick panel connector (assuming you already have Bose equipment). |
Omega Owners Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |